Troopers

Show the list of all Episode I costumes

    Show the list of all Episode II costumes

      Show the list of all Episode III costumes

        Show the list of all Episode VI costumes

        Show the list of all Episode Clone Wars costumes

          Show the list of all Expanded Universe costumes




          • Endor Commando/ Rebel Soldier/ Trooper

            Endor Commando/ Rebel Soldier/ Trooper

            CHARACTER DESCRIPTION Endor Commando/Endor Rebel Soldier/Endor Trooper – These troopers accompanied Han Solo, Leia and Chewbacca to the forest moon of Endor in order to destroy the shield generator that was protecting the second Death Star thereby allowing the Rebel Fleet to destroy it. The troopers were caught in a trap set forth by the Emperor but managed to overcome the odds and complete the mission.   REQUIRED ITEMS 1. Cargo style pants – (commercial BDU in rip stop or twill is acceptable-no sewing modifications needed) spray painted in a camouflage pattern A NOTE REGARDING CAMO FOR ALL PIECES CALLING FOR CAMOUFLAGE: Suggested paint colors below are “Design Master Corp” paint designations, an equivalent is acceptable- Moss Green (heavy) – Holiday Green (light) – Hunter Green (light) – Basil (heavy…primary color) – Bright Olive – (small accents) 2. A beige/tan/sand coloured long sleeve t-shirt  3. Boots: “Desert” style combat or hiking boots. Canvas/Natural upper Target Color: “Sand” FS 33531/RAL 1011 “Brown Beige”; Molded sole, with thick “lug” tread. The sole continues up over the front ½”/12mm of the toe. The original “Sierra” brand boots are long out of production; however there are Israeli Scout Commando Boots that are very close in design and can be either purchased or used as a reference. 4. Gaiters:  A tube of heavy Cotton/Natural fabric starting from the bridge of the foot (covering most of the laces) continuing up past the boot top to slightly below mid-calf. 5-8 sets of eyelets (depending on your measurements). No clear photos of the laces have been found yet; most likely surplus olive-green “para-cord” was used. Color: The originals appear to have been made from a tan or sand material, but were so heavily dyed and painted to appear used they look dark brown or olive when actually seen on screen. 5. Helmet: Consisting of an AN-H-15 cloth helmet (or replica) with a ribbed strip on the top, a replica rigid outer ring, and cloth bill 6. Olive Drab Belt with pouches  7. Short, light-colored leather work gloves  8. The following combinations are acceptable for formal for the upper torso in addition to the tan long sleeved shirt: A camo painted trenchcoat – camo paint should be applied to a tan trenchcoat, if tan trenchcoat/lab coat can not be obtained, you will have to dye trenchcoat/labcoat tan first and then camo paint. A camo painted snow jacket – camo paint must be applied to a tan base. Since snow jackets are by nature white in color, you must dye jacket tan first. Accurate capped sleeve vest with slash pockets and padded applique on right upper chest. Accurate capped sleeve vest with slash pockets and padded applique on right upper chest worn over a camo painted snow jacket. 9.Formal Requirements – choose one: (Unless local laws prohibit or strongly discourage carrying anything that looks like a firearm)  E-11  DH-17  Endor rifle Optional Items: 1. Web bandolier with replica accessories 2. Canvas military-style backpack-no nylon packs-screen accurate is two pocket pack. 3. Endor hardpack 4. Vest accessories such as rank badges and wrist comm. Resources: Studio Creations Endor Rebel Soldier Tutorial Sunrider Base Endor Trooper Forum Endor Bunker Yahoo! Group Build Your Own Endor Commando PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges...

            read more

            Endor Gunner

            Endor Gunner

              CHARACTER DESCRIPTION Endor Gunner – These gunners accompanied Han Solo, Leia and Chewbacca to the forest moon of Endor in order to destroy the shield generator that was protecting the second Death Star thereby allowing the Rebel Fleet to destroy it. The gunners were caught in a trap set forth by the Emperor but managed to overcome the odds and complete the mission.   REQUIRED ITEMS 1. Gray or tan jumpsuit with 4 leg pockets in front and a tabbed closure collar and tabbed closure on sleeves. OR Gray jumpsuit with regular buttoned up pointed collar and 4 leg pockets in front.  2. Olive drab military style canvas/strapping belt  3. At least 2 olive drab pouches  4. Endor capped sleeved vest with quilted portion on upper right and slash pockets.  5. Rank badge  6. short gloves (tan, brown, or deerskin)  7. Tan gaiters with a seam down the front, siver strapping at top, and small black triangle to the inner part of gaiters.  8. Black round toe boots or shoes  OPTIONAL ITEMS 1. Headset 2. Weathering on capped sleeved vest 3. Endor headgear   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

            read more

            Yavin Honor Guard (Ep IV)

            Yavin Honor Guard (Ep IV)

              CHARACTER DESCRIPTION Rebel Honor Guard was the ceremonial guard of the Rebel Alliance during the Galactic Civil War. It comprised former Blue Guards of the defunct Old Republic’s Senate, and several survivors of the destruction of Alderaan by the Galactic Empire. (Source: Wookiepedia)   REQUIRED ITEMS 1. Accurate helmet with visor down 2. Army-green button down tunic with pockets 3. Army-green pants 4. Dark grey or olive drab belt 5. Black boots or black shoes OPTIONAL ITEM 1. Staff/Pike Resources: SWTroopers Rebel Honor Guard PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

            read more

            Yavin Hanger Technician (Ep IV)

            Yavin Hanger Technician (Ep IV)

              CHARACTER DESCRIPTIONS Yavin Hangar Technicians played an important role in the battle against the evil Empire. The technicians ensured that the fighters and their droids were in full working order allowing the rebel pilots to destroy the first Death Star.   REQUIRED ITEMS 1. Helmet: Accurate tech helmet (RFT helmet with no swoop on back) Helmet can be white or light gray and can have either a white/light gray or black com box. 2. Flightsuit: Light tan or light gray coverall with mandarin-style collar and pointed tab, rectangular pocket with a flap closure on upper right arm, 2 hip pockets and 4 leg pockets. No visible zippers or snaps. This is the same flightsuit as the Pilots wear and pockets should be the same. Pants can be hemmed or cuffed. 3. Belt: dark khaki, khaki green, British Khaki, Olive, Olive drab or dark tan with a roll pin buckle. Belt should have mini-flare loops that can be empty or contain the mini-flares. 4. Boots/shoes: Black boots or black shoes with rounded toe and smooth finish. OPTIONAL ITEMS 1. Antenna on comm box on helmet. 2. Mini flares may be worn in belt loops. A mix of empty and filled slots is allowed.   COSTUME RESOURCES   RAID forum   Revised on January 3, 2015.   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

            read more

            Hoth Hanger Technician (Ep V)

            Hoth Hanger Technician (Ep V)

              CHARACTER DESCRIPTION   Hoth Hanger Technicians had an important role to play in the battle of Hoth. The technicians oversaw the shield generator the Rebel Alliance defence against any incoming Imperial attacks. They also helped maintain the Ion cannon used to take out a Star Destroyer and assisted in launching the Rebel Fleet off of the Hoth Planet when the Empire overran the Rebel defences.   REQUIRED ITEMS 1. Technician cold weather hat Very similar to a US Navy foul weather deck hat. Tan, light brown, ecru, khaki would be acceptable 2. The vest is several shades darker than the coveralls. The vest is quilted, front and back, from the bottom to the middle of the arm hole with large diamond quilts. It has a large padded ring shaped collar, and closes in front with no visible fasteners. It extends 2-3” below the natural belt line and is level from front to back with no dips or cuts. Two large un-quilted patch pockets with flaps are on the front. There is a window on the front left breast for a rank badge (only when the vest rank badge is worn). * See formal requirements below. 3. Light tan coverall or pants/ shirt combination with mandarin-style collar and pointed tab, rectangular pocket with a flap closure on upper right arm, 2 upper thigh crescent pockets and 4 leg pockets. No visible zippers or snaps. This is the same flightsuit as the Pilots wear and pockets should be the same. If pants are used they must be modified accordingly with no visible logos, hip pockets, belt loops, etc. A shirt must also be modified accordingly to match references. A Pants/ Shirt combination must match to appear to be a one piece uniform 4. Black mid-calf Jackboots may be worn. Real or replica jackboots are encouraged but motorcycle boots with round toe and conservative heel are permitted. No ornamentation, or ankle straps permitted. Black zippers are permitted if they cannot be seen when viewed from the front 5. TIG welding gloves or other white glove with long grey leather cuff. The left glove typically has a comm device. Light weathering is permitted Technician Formal Requirements: **Choose two or more. ** 1. Rank Badge window on vest left breast, with Hoth rank badge. 2. Rank badge on right arm consistent with screen images 3. Snowspeeder type Comm Device on the left glove gauntlet OPTIONAL ITEMS 1. Spanner 2. Code cylinders in pocket on left arm. No more than four Resources: Rebel Troopers Forum Ice Station Echo Yahoo! Group Updated 8 June 2016 by RAID members PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

            read more

            Hoth Hanger Trooper (Ep V)

            Hoth Hanger Trooper  (Ep V)

              CHARACTER DESCRIPTION   A Hoth Rebel Trooper is an infantry unit equipped with special gear who fought for the rebellion on the ice planet Hoth. These units are not specifically trained to work in snow, being regular Rebel troopers equipped with snow gear.   REQUIRED ITEMS 1. Trooper soft helmet: Accurately detailed soft helmet in light tan, khaki, white, or ecru consistent with screen images. Helmet includes white framed goggles with amber or yellow-green lenses. Comm device on the left earpiece is optional, see below. Tan , brown or black scarf tied around soft helmet. 2. Quilted vest with padded collar: The vest is several shades darker than the coveralls. The vest is quilted, front and back, from the bottom to the middle of the arm hole with large diamond quilts. It has a large padded ring shaped collar, and closes in front with no visible fasteners. It extends 2-3” below the natural belt line and is level from front to back with no dips or cuts. Two large un-quilted patch pockets with flaps are on the front. There is a window on the front left breast for a rank badge (only when the vest rank badge is worn). 3. Flightsuit: Light tan coverall or pants/ shirt combination with mandarin-style collar and pointed tab, rectangular pocket with a flap closure on upper right arm, 2 upper thigh crescent pockets and 4 leg pockets. No visible zippers or snaps. This is the same flightsuit as the Pilots wear and pockets should be the same. If pants are used they must be modified accordingly with no visible logos, hip pockets, belt loops, etc. A shirt must also be modified accordingly to match references. A Pants/ Shirt combination must match to appear to be a one piece uniform. 4. Jackboots or snow moccasins: Black mid-calf Jackboots may be worn. Real or replica jackboots are encouraged but motorcycle boots with round toe and conservative heel are permitted. No ornamentation, or ankle straps permitted. Black zippers are permitted if they cannot be seen when viewed from the front. Some Hangar Troopers are seen wearing snow moccasins. Snow Moccasins will be consistent with the Trench Trooper Moccasin. 5. Gauntlet Gloves: TIG welding gloves or other white glove with long grey leather cuff. The left glove typically has a comm device. Light weathering is permitted. FORMAL REQUIREMENTS 1. Comm device with antenna on soft helmet left earpiece. May be medium grey to black. 2. Rank Badge window on vest left breast, with Hoth rank badge. 3. Rank badge on right arm consistent with screen images. 4. Block type OR Snowspeeder type Comm Device on the left glove gauntlet Resources: Rebel Trooper Forum Ice Station Echo Yahoo! Group Updated 8 June 2016 by RAID members PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

            read more

            Hoth Trench Trooper (Ep V)

            Hoth Trench Trooper (Ep V)

              CHARACTER DESCRIPTION   Hoth Trench Troopers featured in Empire Strikes back and could be seen trying to hold off the oncoming attack of Imperial forces whilst the Rebel fleet attempted to evacuate the Ice Planet Hoth.   REQUIRED ITEMS 1. Accurate soft helmet in a white, beige or ecru colour 2. White framed goggles with with yellow or light amber lenses 3. Jacket in white or beige/natural colour with tan quilted top section 4. Backpack Vest in a beige or ecru colour 5. Tan coloured pants with quilted/padded knees 6. Accurate grey or tan coloured gaiters 7. White web belt with buckle detail 8. Greeblies on right front vest 9. White/Light grey gloves with med grey cuff and com device FORMAL REQUIREMENTS – CHOOSE TWO 1. Rank badge on vest 2.  Comm device/earpiece on hat 3. DH-17 blaster Either RFT version or modified Hoth version) 4. White holster 5. Hoth Rifle 6. Backpack/Hardpack Canvas covered boxes with black greeblies on a frame 7. Tan fabric pouch 8. Tan or black scarf PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

            read more

            Rebel Fleet Trooper (Ep IV)

            Rebel Fleet Trooper (Ep IV)

            CHARACTER DESCRIPTION Rebel troopers (also known as Rebel soldiers and Rebel infantry) were standard foot soldiers employed by the Alliance to Restore the Republic. After the Declaration of a New Republic in 5 ABY, most Rebel troopers were organized into regular units of the New Republic Army. (Source: Wookiepedia) REQUIRED ITEMS 1. Accurate Fleet Trooper helmet Can have white or black “visor”. Visor can also be dark smoke glass that can be put in the down position to cover wearers face. A comm pad on the helmet is required. An antenna is not required, but permitted. 2. Long-sleeve blue work shirt with bib in front (blue Chambray or blue Oxford recommended Bib should cover front of shirt with no gaps at the bottom). Shirt bib should come all the way up to the collar button and not sag. No button down collars (with visible button holes on collar). Colour range from a light blue to medium blue (costume can be denied if shirt colour is deemed too dark blue). 3. Black, collarless vest with 4 standard BDU pockets on the front and no visible buttons or ornamentation of any kind Proper pocket configuration can be seen below in optional items. 4. Light Grey pants with large cargo pockets Charcoal or dark grey are not permitted 5. Boots: Mid-calf black boots (Jack boots or engineer boots are acceptable) Leather pull-on style preferred with low heels. No laces or ankle buckles. No non-black zippers. Any zipper closure must either be hidden or on the inside calf. No zippers on front or outside calf of boots. High-Calf boots are acceptable with sufficient blousing of the pants legs. No rubber boots. 6. Belt and buckle Solid leather or vinyl – no holes or decorations. Belt width should be 1 3/4 to 2″ wide in canyon or range tan colour 2″ buckle can be rectangular, octagonal or oval. FORMAL REQUIREMENTS – CHOOSE THREE ITEMS 1. DH-17 blaster Unless local laws prohibit or strongly discourage carrying anything that looks like a firearm 2. Pike weapon 3. Two (2) aluminium/silver belt boxes proportional to wearer  4. Large open pocket on the upper back of the vest with a center Velcro closure. Proportional to wearer and should go almost from armhole to armhole 5. Strip of 4 pockets along the bottom hem of the vest approx. 5″ tall 6. Accurate front pocket layout consisting of long and narrow upper right pocket with tab closure and left upper pocket should be smaller than bottom two pockets 7. Antenna on helmet comm box  OPTIONAL ITEMS 1. Accurate Holster  2. Rank Badge  COSTUME RESOURCES Studio Creations Rebel Fleet Trooper Tutorial SWTroopers Rebel Fleet Trooper 1Tutorial Sunrider Base Rebel Fleet Trooper Tutorial Echo Base Rebel Fleet Trooper Helmet Tutorial Echo Base DH-17 Blaster Tutorial TK-560 DH-17 Blaster Tutorial Blaster Builders Club’s DH-17 Blaster Tutorial Rebel Fleet Trooper Yahoo Group Sunrider Base’s Rebel Fleet Trooper forum PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start...

            read more