Rebels




  • Sabine Wren (Rebels Season 2)

    Sabine Wren (Rebels Season 2)

    CHARACTER DESCRIPTION Sabine Wren was a Mandalorian Human female weapons expert who was active during the reign of Galactic Emperor Sheev Palpatine around five years before the Battle of Yavin. She was also a graffiti artist who customized her armor and tagged a new symbol every time the crew of the Ghost struck Imperial targets. Source: Wookieepedia REQUIRED ITEMS 1. SOFT PARTS a. Shirt Sabine’s upper clothing consists of a black or charcoal grey long sleeve top with mandarin collar. There is a second short sleeve garment worn over the top. Short ” faux” sleeves sewn to the long sleeve shirt are acceptable in lieu of a second garment. The front of the outer shirt has a grey or silver panel approximately half the width of the observable waist line when viewed front on, narrowing slightly before expanding into a “Y” type shape before it extends beneath the armor. The rear of the shirt has a grey or silver panel that frames the “black” of the shirt to form a ” rounded mountain” shape. The black mountain shape cannot be too” flat” but should have similar height as it is wide. Please refer to reference shots. Fabric used needs to be stretch material or tightly fitted. b. Pants The pants are also of stretch material or tightly fitted. They consist of a khaki or muddy brown color with lighter inner panels extending from inner mid thigh to the waist line, front and back. The lighter inner panels need to have a slight curve to the vertical-to-horizontal transition. That “corner” should be slightly rounded, not squared off in both front and back The color of the inner panel should be a slightly lighter version of the main pant color. Over contrasting colors such as brown and cream are incorrect and should be avoided. The lighter inner panel should be the same width as the grey panel of the shirt and ” line up ” at the waist line. Some flexibility is afforded here as the juncture will be concealed by the double belt. 2. BELTS & ACCESSORIES a. Belts Sabine now wears two belts. The lower belt is her original from season 1. It is brown leather or leather like and joins in the front via a rectangular silver buckle the same width as the belt. The buckle may be of alternate material as long as it is painted to give the appearance of metal. The buckle has a narrow rectangle shape etched into the upper section. Marking this with other methods is acceptable if the appearance is accurate. The second belt sits on top of the first belt and is approximately 1.5 times as wide. It has a darker line running the length of the belt down from the top edge and an identical marking above the lower edge, also running the length of the belt. The buckle is slightly larger than the actual belt and is adorned with a parallelogram shape etching. b. The upper belt carries many accessories. The first, are two large pouches worn on either hip. They are 2.5 – 3 times longer than the width of the upper belt and approximately 1.5 times as wide. They have a single, thin rectangular, silver adornment on the closed flap. Metal may be used or silver paint...

    read more

    Hera Syndulla

    Hera Syndulla

      CHARACTER DESCRIPTION Hera Syndulla was a Twi’lek female rebel who lived during the reign of the Galactic Empire. A capable pilot, Syndulla was the owner of the VCX-100 light freighter Ghost.  She kept a secret blaster in her boot and was close with Kanan Jarrus, whom she convinced to become a rebel. Source Wookieepedia   REQUIRED ITEMS 1.  Lekku: Accurate light green colour Lekku with detailing visible on the exposed parts of the Lekku. 2. Body Paint: Light green coloured body paint which should match the Lekku colour. 3. Headpiece : Screen-accurate off-white pilot’s headpiece. 4. Goggles: Top piece should consist of a silver frame with tinted lenses on a brown leather or leather like base, these should be either circular or slightly bowed towards the outside of the head.  The goggles should be attached to brown and silver earpieces by silver metal / metallic looking arms, and secured by a brown leather or leather like chinstrap.  The ear pieces should have the detail line on the outer dome. 5. Shirt: Off-white body and sleeves that puff around the lower arm. The shirt collar must have the accurate strap detail.  (A dickie is also acceptable in place of a separate shirt).  6.Vest and Shoulder Pads: Accurate, matching brown leather or leather like material vest and shoulder pads, which should be close in colour to that of the brown parts of the goggles.  Detail lines should be present on the shoulder and chest piece.  Vest should be fitted. 7. Gloves: Large flared dark brown leather or leather-like gauntlet style gloves with wrist strap.  Colour should be clearly darker than the vest and shoulder pads.  Gloves should have 2 detail snaps/rivets present on the outer edge of each side wrist strap. 8. Pants: Gold/light orange flight suit pants with five belt loops.  Pants should end above the waist in the back and rise to the centre of the leather vest in front, where they should appear to be held up by a button or snap, and must also have a leather or leather like detail made of the same material and colour as the vest.  Accurate pockets, knee padding, and fly should be sewn on. Trousers should have cuffed ankles. 9. Leg Strapping and Belt: Light grey leg strapping similar to that of an X-wing pilot on the outside of the legs and pants belt.  Strapping should include the detail pieces similar to a strap adjuster, which should join the strapping that goes around the leg to the strapping pieces that join to the belt.  Pants belt should be made of the same colour material as the leg strapping 10. Boots: Brown leather or leather like boots with low heel, covered by spats in matching colour and material as the vest and shoulder pads.  Boots should have silver/grey foot guards.  Other visible parts of the boots should be plain (e.g. no visible zips, laces, straps, buckles, etc).     OPTIONAL ITEMS 1. Green contact lenses. 2. Accurate Hera pistol and holster on right boot in matching colour material as the boot spats. 3. Accurate communicator on left hand glove strap. COSTUME RESOURCES Star Wars Rebels: The Visual Guide Wookieepedia   Standard reviewed by the Costume Standards Committee 15 Feb 2015   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be...

    read more

    Kanan Jarrus

    Kanan Jarrus

    CHARACTER DESCRIPTION

    Kanan Jarrus, born Caleb Dume, was a Human male Jedi Padawan who survived Order 66.  Going into hiding, he forsook the Jedi ways for sometime, swapping his blue-bladed lightsaber for a blaster. Eventually, he would come to command the VCX-100 light freighter Ghost several years before the Battle of Yavin.  While cocky and often sarcastic, Jarrus was eager to help out and fight the Galactic Empire.  Five years before the Battle of Yavin, Jarrus met Ezra Bridger, a fourteen-year-old Force-sensitive Human, whom he decided to mentor.

    read more

    Sabine Wren

    Sabine Wren

    CHARACTER DESCRIPTION Sabine Wren was a Mandalorian Human female weapons expert who was active during the reign of Galactic Emperor Sheev Palpatine around five years before the Battle of Yavin. She was also a graffiti artist who customized her armor and tagged a new symbol every time the crew of the Ghost struck Imperial targets. Source: Wookieepedia REQUIRED ITEMS 1. Flight suit shirt should be a stretch material two-piece garment with the top being black with gray panels. Top must have short sleeves and a high collar that splits in the front. 2. Pants should be khaki with light brown panels and long enough to tuck into the boots. 3. Boots must be high enough to stop just below the knee, made of black leather or leather-like material, and fit snug to the wearer. Wedge heel preferred. Must be weathered and paint splattered to match references. 4. Chest Armor should consist of collar armor, right and left chest plates, and center diamond. Should be at least 3mm thick. Chest plates and collar plates should be painted fuchsia/maroon, center diamond should be red. Left chest plate must feature an orange stylized rebel design to match references. Right chest plate must must feature two diagonal stripes painted to match references. All plates must be painted and weathered to match references both in color and weathering pattern. All armor must attach securely to the top with proper spacing. 5. Shoulder Armor must be at least 3mm thick. Must have four points and must curve around the upper arm and shoulder. Right shoulder must be white or light grey with a faded checker pattern. Left shoulder must be mottled orange with a stylized hound illustration in faded fuchsia/maroon. Must be painted and weathered to match references both in color and weathering pattern. 6. Knee Armor must be at least 3mm thick and painted fuchsia/maroon. Right knee must feature a vertical white stripe. Must be painted to match references in both color and weathering pattern. Should have the appearance of being attached by black straps wide enough to cover the knees. 7. Elbow Armor must at least 3mm thick and painted fuchsia/maroon. There should be two plates that appear to connect when the arm is straightened and separate when the arm is bent. Plates should be attached to a black band around the elbow. Must be painted and weathered to match references. 8. Boot Armor must be at least 3mm thick and painted fuchsia/maroon. Armor should be weathered and paint splattered to match references. 9. Gloves must be black leather or leather-like material. Must extend to a few inches below the elbow and be flared “gauntlet” style similar to X-Wing pilot gloves. Gloves should be weathered and paint splattered to match references. 10. Holster Belt must be a medium brown leather or leather like material that secures via metal rectangular buckle in front. Must feature 2 drop holsters with an angular design. Must have two metallic loops on either side of the belt buckle with the holster connecting between the buckle and the loop. Must feature two horizontal metallic loops where the holster connects to the belt in the back. 11. Holsters should hold 2 Westar-35 pistols similar to the ones seen in TCW. Must be a mismatched pair with one being painted blue,...

    read more