Jedi




  • Anakin Skywalker (Episode III)

    Anakin Skywalker (Episode III)

      CHARACTER DESCRIPTION Anakin Skywalker – was a Force-sensitive Human male who served the Galactic Republic as a Jedi Knight and later served the Galactic Empire as the Sith Lord Darth Vader. Born to the slave Shmi Skywalker in 41.9 BBY, Anakin was conceived by midi-chlorians, the symbiotic organisms that allowed individuals to touch the Force, and he and his mother were brought to the desert planet of Tatooine to be the slaves of Gardulla the Hutt. They soon ended up as the property of the Toydarian Watto, and Skywalker exhibited exceptional piloting skills and a reputation for being able to build and repair anything even at a young age. In 32 BBY, Skywalker encountered the Jedi Qui-Gon Jinn and Padmé Amidala, and he helped them secure the parts they needed for their starship by winning the Boonta Eve Classic podracing event—only to learn that he had also won his freedom in doing so. (Source: Wookiepedia)   REQUIRED ITEMS  1. Outer Tunic (OT): Dark brown (darker than inner tunic and pants, and not appearing black) gauze-type weave with a crinkle texture. The direction of the crinkle texture should run vertical on the main body of the OT and along (parallel with) the sleeves. The crinkle texture on the collar should run parallel to the collar-OT seam Heavy Cotton Gauze is preferred. Lighter cotton gauze fabrics should be doubled or lined Collar should be approximately 2 inches in width Bottom hem of the OT should be at mid-thigh level The hem on the bottom of the OT and the end of the left sleeve should be approximately 1 inch wide Sleeves should be tucked under the shoulder (“shoulder tucks”) that are at least 1.5 inches deep The end of the left sleeve opening should be at least 1.5 times the width of the hand when spread out (measuring from tip of thumb to tip of pinky finger) The right sleeve can be shortened and cuffed in order to fit into the glove without being bunched The OT should be made such that there is a skirt that hangs below the obi and which is attached with a seam to the upper portion of the OT, in order to give a full drape to the lower portion (rather than being form fitting) OT should be closed left front panel over the right front panel, with no visible closure mechanism  2. Cloth Tabards: made of the same fabric as the Outer Tunic, and extending the same length as the OT to the front while ending under the Obi in back Cloth Tabards run underneath the leather tabards and, on the back, form a “V”, but do not cross Typically made in a “Y” form where the lower portion of the “Y” hangs below the Obi, in front The crinkle texture of the fabric should run parallel to the direction of the Cloth Tabard The width of the Cloth Tabards should be the same as the Leather Tabards and extend from the collar-to-OT seam (at the neck) to just past the edge of the shoulder tuck portion of the OT 3. Leather Tabards: Dark brown leather (fine grain) or pleather tabards with a shoulder and waist seam (waist seam is covered by the Obi). The color should be at least as dark (or darker) than...

    read more

    Anakin Skywalker (Jedi Padawan)

    Anakin Skywalker (Jedi Padawan)

      CHARACTER DESCRIPTION Anakin Skywalker – was a Force-sensitive Human male who served the Galactic Republic as a Jedi Knight and later served the Galactic Empire as the Sith Lord Darth Vader. Born to the slave Shmi Skywalker in 41.9 BBY, Anakin was conceived by midi-chlorians, the symbiotic organisms that allowed individuals to touch the Force, and he and his mother were brought to the desert planet of Tatooine to be the slaves of Gardulla the Hutt. They soon ended up as the property of the Toydarian Watto, and Skywalker exhibited exceptional piloting skills and a reputation for being able to build and repair anything even at a young age. In 32 BBY, Skywalker encountered the Jedi Qui-Gon Jinn and Padmé Amidala, and he helped them secure the parts they needed for their starship by winning the Boonta Eve Classic podracing event—only to learn that he had also won his freedom in doing so. (Source: Wookiepedia) REQUIRED ITEMS 1. Chocolate to dark brown outer tunic with shoulder tucks  2. Light tan inner tunic  3. Chocolate to dark brown cloth tabards 4. Dark brown leather/pleather tabards that fall 2-3” past hemline of outer tunic 5. Chocolate to dark brown obi 6. Dark brown flat front pants 7. Medium brown leather belt with inner smaller strap held by 8 silver button studs and silver side release buckle  8. Jedi food capsules, 2 gold, 2 copper, 2 silver, 2 gunmetal 9. Movie accurate small ribbed belt pouch 10. Movie accurate tall ribbed belt pouch 11. Movie accurate wide ribbed belt pouch 12. Covertec clip (original style) 13. Anakin’s AotC Hero lightsaber hilt 14. Belt components should be arranged in the proper order 15. Dark brown boots, knee high, with spats and three straps on each leg 16. Short hair or Anakin’s cut from AotC. Costumer must be clean shaven 17. Padawan braid OPTIONAL REQUIREMENTS 1. Outer dark brown cloak with tabbards and pleated hood 2. Jedi apprentice ponytail COSTUME RESOURCE 1. Rebel Legion Anakin Forums 2. Padawan’s Guide PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Anakin Skywalker (Outlander Peasant Disguise)

    Anakin Skywalker (Outlander Peasant Disguise)

      CHARACTER DESCRIPTIONS Anakin Skywalker – was a Force-sensitive Human male who served the Galactic Republic as a Jedi Knight and later served the Galactic Empire as the Sith Lord Darth Vader. Born to the slave Shmi Skywalker in 41.9 BBY, Anakin was conceived by midi-chlorians, the symbiotic organisms that allowed individuals to touch the Force, and he and his mother were brought to the desert planet of Tatooine to be the slaves of Gardulla the Hutt. They soon ended up as the property of the Toydarian Watto, and Skywalker exhibited exceptional piloting skills and a reputation for being able to build and repair anything even at a young age. In 32 BBY, Skywalker encountered the Jedi Qui-Gon Jinn and Padmé Amidala, and he helped them secure the parts they needed for their starship by winning the Boonta Eve Classic podracing event—only to learn that he had also won his freedom in doing so. (Source: Wookiepedia) REQUIRED ITEMS 1. Woolen outer vest, double breasted, dark brown with light brown accent pattern. Vest has wide mandarin-type collar  2. Taupe crinkle cotton long sleeve inner tunic 3. Brown and orange patterned neck scarf  4. Dark green cummerbund  5.Dark brown flat front pants  6. Dark brown boots, knee high, with spats and three straps on each leg  7. Short hair or Anakin’s cut from AotC. Costumer must be clean shaven 8. Padawan braid  OPTIONAL REQUIREMENTS   1. Knee length weathered ivory travel cloak with white horizontal stripes and v-neck to chest. Sides should drape to just past the elbows when arms are bent 2. Jedi apprentice ponytail PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Anakin Skywalker (Clone Wars Microseries)

    Anakin Skywalker (Clone Wars Microseries)

      CHARACTER DESCRIPTIONS Anakin Skywalker – was a Force-sensitive Human male who served the Galactic Republic as a Jedi Knight and later served the Galactic Empire as the Sith Lord Darth Vader. Born to the slave Shmi Skywalker in 41.9 BBY, Anakin was conceived by midi-chlorians, the symbiotic organisms that allowed individuals to touch the Force, and he and his mother were brought to the desert planet of Tatooine to be the slaves of Gardulla the Hutt. They soon ended up as the property of the Toydarian Watto, and Skywalker exhibited exceptional piloting skills and a reputation for being able to build and repair anything even at a young age. In 32 BBY, Skywalker encountered the Jedi Qui-Gon Jinn and Padmé Amidala, and he helped them secure the parts they needed for their starship by winning the Boonta Eve Classic podracing event—only to learn that he had also won his freedom in doing so. (Source: Wookiepedia) This version of the costume was seen in the animated Clone Wars Microseries Volume 2 that was initially aired on the Cartoon Network but can now be found on DVD. REQUIRED ITEMS 1. Dark grey chest armour with shoulder bells 2. Matching dark grey clone trooper style belt 3. Dark brown knee-length V-cut outer vest with matching cape 4. Mocha brown outertunic with slim sleeves 5. Dark brown right and left arm ribbed guantlets with leather strap around wrist 6. Dark brown pants 7. Knee length dark brown boots with spats and three straps on each leg 8. Anakin’s ROTS Hero Lightsaber hilt FORMAL REQUIREMENTS – YOU MUST HAVE ONE OF THE FOLLOWING 1. Dark grey chest armour 2. Anakin’s Jedi Knight hair 3. Anakin’s right eye scar COSTUME RESOURCE Rebel Legion Anakin Forums Credit: BryanAnakin PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Anakin Skywalker (Endor Ghost)

    Anakin Skywalker (Endor Ghost)

      CHARACTER DESCRIPTIONS Anakin Skywalker – was a Force-sensitive Human male who served the Galactic Republic as a Jedi Knight and later served the Galactic Empire as the Sith Lord Darth Vader. Born to the slave Shmi Skywalker in 41.9 BBY, Anakin was conceived by midi-chlorians, the symbiotic organisms that allowed individuals to touch the Force, and he and his mother were brought to the desert planet of Tatooine to be the slaves of Gardulla the Hutt. They soon ended up as the property of the Toydarian Watto, and Skywalker exhibited exceptional piloting skills and a reputation for being able to build and repair anything even at a young age. In 32 BBY, Skywalker encountered the Jedi Qui-Gon Jinn and Padmé Amidala, and he helped them secure the parts they needed for their starship by winning the Boonta Eve Classic podracing event—only to learn that he had also won his freedom in doing so. (Source: Wookiepedia) REQUIRED ITEMS 1. Floor length tan/linen outer tunic  2. Dark brown inner tunic (V-necked/PT-style, not OT Obi-Wan turtleck)  3. Dark brown robe  4. Proper OT-style Jedi belt and hair style  PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here)   Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Obi-Wan Kenobi (The Clone Wars season I)

    Obi-Wan Kenobi (The Clone Wars season I)

      CHARACTER DESCRIPTION Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter. His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area. It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life.  (Source: Wookiepedia) REQUIRED ITEMS 1. Clone white animated-style armour (forearms, elbows, biceps with backs cut out, shoulders, handplates, shins, knees) Left shoulder has red Jedi symbol. Elbows must be attached to forearms.  Jedi white chest/shoulder armour with mock-neck collar All armour pieces must have the correct weathering / neck seal must go completely around the neck (No gaps allowed) All armour pieces must be made from a rigid material (No foamies allowed) 2. Tan sleeveless outer tunic, knee length 3. Single tabard in front extending down from the waist to knee level 4. Dark brown obi 5. Black undersuit 6. Black gloves 7. Dark Brown leather belt with smaller inner strap and silver buckle 8. 2 tall brown leather pouches 9. Revenge of the Sith Hero lightsaber hilt 10. Belt components should be arranged in the proper order 11. White clone trooper style shoes  12. Hair should be styles as seen in series. Costumer should have a beard. Wigs and prosthetics are allowed OPTIONAL REQUIREMENTS 1. Brown hooded cape 2. ‘Obi-Wan Kenobi’ knees attached to armour COSTUME RESOURCES 1. RL Jedi Tutorials 2. Crazy Old Wizards (credits to Defyitall for the Obi-Wan standards) PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Barriss Offee (The Clone Wars)

    Barriss Offee (The Clone Wars)

    Barriss Offee was a Mirialan Jedi Knight and General during the Clone Wars. A skilled Jedi Healer, Offee utilized her abilities at a Rimsoo on Drongar during the galactic conflict.

    read more

    Generic Jedi General (The Clone Wars)

    Generic Jedi General (The Clone Wars)

      CHARACTER DESCRIPTION Jedi – A Jedi was a member of the Jedi Order, who studied, served and used the mystical energies of the Force; usually, the light side of the Force. The weapon of the Jedi was the lightsaber, a weapon with a blade made of pure energy. The Jedi fought for peace and justice in the Galactic Republic, usually against their mortal enemies, the Sith and Dark Jedi, who studied the dark side of the Force. Although the Order was almost destroyed five times, including once by the Sith Empire of Darth Revan, by the Sith Triumvirate under Darth Nihilus during the First Jedi Purge shortly after, 4,000 years after that, by the Great Jedi Purge of Darth Sidious, and a century afterwords by Darth Krayt’s Galactic Empire and it’s Third Jedi Purge, the order continued to live on, in part due to the Skywalker family who time and time again played important parts in the history of the Jedi. REQUIRED ITEMS 1. Permitted colours- Earth tones: Only browns and natural colours are acceptable. Shades of blue, green, orange and red are not permitted  2. Soft Costume  Inner tunic or Dickie. Mandarian-style acceptable.  Outer Tunic, Well-fitted, extending to the costumer’s knee area.  Tabards, extends past the obi/sash,.  Obi/sash. 3. Belt, wide leather main belt with a covertec (or similar), thinner secondary belt on top of the main belt, and a buckle. Thinner secondary belt cannot be loose or “sag”. No black belts accepted  4.  Brown Boots, (leather, seude, pleather) must rise at least to the calf, but not above the knee. No rubber boots, black boots, or visible laces permitted 5. Pants or skirt 6. No visible t-shirts 7. Lightsaber (No toy sabers) 8.  Jedi Armour – Required. This is the only permitted combination Style 1) Animated Clone-styled armour. White only. Hand plates & Forearms, black gloves Style 2) Heavy leather gauntlets 9. Shoulder/chest and bicep armour reserved for face characters only (Obi-Wan, Anakin) FORMAL REQUIREMENTS – YOU MUST HAVE AT LEAST TWO 1. At least one set of four food capsules 2. At least one of the following pouches: small brown ribbed belt pouch, tall brown ribbed belt pouch, or wide brown ribbed belt pouch 3. Comlink on armoured forearm OPTIONAL REQUIREMENTS Decals (limited to this selection) 1. Republic logo 2. Jedi Order symbol PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here)   Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Luminara Unduli (The Clone Wars)

    Luminara Unduli (The Clone Wars)

      CHARACTER DESCRIPTION Luminara Unduli – was a female Mirialan who served as a Jedi Master and Jedi General in the fading years of the Galactic Republic. She was a valued adviser to the Jedi High Council, the Supreme Chancellor, and the Galactic Senate. During the Clone Wars, she fought with her last Padawan, Barriss Offee, and she was a common and formidable presence at points of crisis, on worlds such as Ilum, Nadiem, and Geonosis. She was killed during the Battle of Kashyyyk when Contingency Order 66 was enacted. REQUIRED ITEMS 1. Black one-piece bodysuit with turtleneck, long sleeves, and textured front -OR- Black fitted pants/leggings and tight black longsleeved shirt with turtleneck collar and textured front 2. Brown open-front overshirt attached at princess seam of undershirt, with split bell-shaped sleeves just past elbow-length 3. Floor-length Open front brown skirt 4.Decorative clasp at neck, metal-coloured with 5 ‘danglies‘ 5. 2 brown belts with gold round medallions, one worn straight, one worn slanted 6. Brown Egyptian-styled headdress with brown/black trim 7. Decorative wrist bracers in browns 8. Decorative waist tabard in browns 9. Tall black boots, No-low heel 10. Olive or yellowish skintone, with black/blue diamond chin tattoos and dark lower lip 11. Painted Black Fingernails 12. Green-bladed Lightsaber  OPTIONAL ITEMS 1. Luminara’s Hero Lightsaber hilt 2. Bright Blue Contacts PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Ahsoka Tano

    Ahsoka Tano

      CHARACTER DESCRIPTION Ahsoka Tano, nicknamed Snips by her master, was a Togruta female from the planet Shili who trained as a Jedi apprentice during the Clone Wars, the conflict between the Galactic Republic and the Confederacy of Independent Systems. Tano was assigned to Jedi Knight Anakin Skywalker by Jedi Grand Master Yoda, and she demonstrated an eagerness to prove herself worthy to be his apprentice. Tano was involved in the defeat of the Separatist army on the planet Christophsis and was important to Republic efforts during the Battle of Teth. Along with Skywalker, Tano was instrumental in acquiring the Republic’s safe passage through Hutt Space, due to her part in rescuing the son of Jabba the Hutt, which ensured an alliance between the Republic and the Hutt clans.  (Source: Wookiepedia) REQUIRED ITEMS 1. Maroon or dark red Suede (or Micro-suede) tube top and mini skirt 2. Maroon or Dark Red distressed leather gauntlets with 3 buckles and dark red suede (or micro-suede) elbow covering 3. Maroon or dark red distressed leather (or leather like) gloves (separate from gauntlets) 4. Tights: whitish/grey in colour 5. Dark Red distressed leather (leather like) square-toed boots with dark red distressed leather (leather like) spats with 5 buckles that match gauntlet buckles 6. Blue and white striped togrutan montrals/head-tails with beads,preferably skin-like appearance as opposed to fabric finish  7. Two food capsules, 1 silvery blue, 1 gold 8. One boxy pouch 9. Dark Red distressed belt with gold trapezoidal buckle with purple single tabbard coming down with diamond design in darker purple on it 10. Green lightsaber (non-toy lightsaber) 11. Upper body and face painted burnt orange with white designs on face, no splotchy make-up OPTIONAL ITEMS 1. 7 silver triangular pieces of jewellery on the head 2. Luke ANH style poncho 3. Luke ROTJ style cloak COSTUME RESOURCES Angels of Iego PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Galen Marek – Ceremonial Jedi Robes

    Galen Marek – Ceremonial Jedi Robes

      CHARACTER DESCRIPTION Galen Marek, codenamed Starkiller, was a male Human apprentice of the Sith Lord Darth Vader. A powerful Force-user who lived during the era of the Galactic Empire, Marek originated from the Wookiee home planet of Kashyyyk as the sole offspring of two Jedi Knights—Mallie and Kento Marek—who deserted the Jedi Order during the Clone Wars. Following the death of his mother, the young Marek’s father was killed in battle by Darth Vader. Though only a child, Marek possessed an exceptionally strong connection to the Force that the Dark Lord of the Sith sought to exploit.  (Source: Wookiepedia) REQUIRED ITEMS 1. White long sleeve mock turtleneck / white long sleeve crew neck shirt 2. White cowl / hood (attached either to the dark tan vest, or to the turtleneck in the rear) 3. Dark tan vest w/ single tabbard on L side going down to mid-shin. Vest needs to have three shoulder tucks on each side, & drop down to the mid upper arm on both sides 4. Dark tan arm wrappings on both forearms from elbow down to first row of knuckles 5. Large white obi. Obi should be wide enough to go from pants waist to mid-chest 6. Narrower (approx 3″) dark tan sash wrapping several times around large white waist obi 7. Khaki pants 8. Two identical lightsaber hilts (no toy sabers or Ultimate FX short saber) attached to the dark tan sash on the right hip. (One hilt needs to be tucked behind top layer of tan sash, the second hilt is attached using the sash itself by crossing around the hilt) 9. Lightsaber (No toy sabers or Ultimate FX short saber) carried in hand 10. Dark brown leather or leather-like boots rising to just below the knee. Rubber boots not allowed 11. Costumer should be clean shaven. Short hair preferred, but if costumer has longer hair, should be completely hidden inside cowl OPTIONAL ITEMS 1. Starkiller lightsaber hilt 2. Aqua coloured lightsaber blade PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Galen Marek – Arena Standard, FU II

    Galen Marek – Arena Standard, FU II

      CHARACTER DESCRIPTION Galen Marek, codenamed Starkiller, was a male Human apprentice of the Sith Lord Darth Vader. A powerful Force-user who lived during the era of the Galactic Empire, Marek originated from the Wookiee home planet of Kashyyyk as the sole offspring of two Jedi Knights—Mallie and Kento Marek—who deserted the Jedi Order during the Clone Wars. Following the death of his mother, the young Marek’s father was killed in battle by Darth Vader. Though only a child, Marek possessed an exceptionally strong connection to the Force that the Dark Lord of the Sith sought to exploit.  (Source: Wookiepedia) REQUIRED ITEMS 1. Grey flannel or flannel like shirt with both arms cut off or under-rolled to the lower bicep area. No stitching should be apparent on rolled up fabric, no frayed edges on bottom 2. Black cargo pants 3. Black boots, leather or leather-like with no laces 4. Front and back grey cloth tabards extending from upper belt hanging to mid-knee. Front tabard is tapered from mid thigh width. Rear tabard is tapered from waist width. Tabards should be appropriately ‘weathered’ at bottom to represent wear 5. Leather or similar fingerless gloves. Each glove has black metallic backing armour that runs from the knuckles to mid hand with two edges folding inwards, ending at wrist 6. Dark (dark and light grey) cloth or leather wraps around base of glove that end approximately 1-2” below the elbow 7. Dark (dark and light grey) cloth or leather wraps around arch of boot, circling the leg up to the top of the boot 8. Chest harness consisting of two dark brown leather/leather like belts that cross the body at chest level and stomach level. Top harness has two straps leading up to attach to top of back armour 9. Shoulder bell armour of metallic or metallic appearing construction. Should curve along the shoulder, sloping higher towards the neck. A second additional upper arm armour bell of similar construction should be attached to upper harness 10. Connected back armour consisting of dark brown leather/leather like armour stretching from top of back to bottom of ribs. Armour should have four evenly spaced rectangular leather plates, vertically oriented 11. Dark brown leather/leather like waist belt. Belt has unique belt buckle on front along with two circular buckles on left and right. Trailing belts off front and back support large dark brown leather/leather-like pouch on thigh 12. Pouches – Marek has 4 other dark brown leather/leather like pouches – two small pouches directly under the arms attached to upper chest belt, two larger pouches on waist belt 13. 2 identical non-toy, PVC or custom lightsabers. Sabers may attach to left and right side of main belt (in-game version) or on harness (trailer version), but not required to attach. If bladed, blades may not be red or black 14. Short or crew-cut hairstyle similar to Marek. No long hair allowed. Costumer should be clean shaven OPTIONAL REQUIREMENTS 1. Weathering on shirt 2. Harness closes with metallic or metallic appearing quick release buckles 3. Starkiller style arena sabers or in-game sabers Reference photos: http://s1133.photobucket.com/albums/m600/JediMM/TFU2%20Ref%20Photos/Marek%20Arena/ PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition...

    read more

    Galen Marek (Death Star Duel)

    Galen Marek (Death Star Duel)

      CHARACTER DESCRIPTION Galen Marek, codenamed Starkiller, was a male Human apprentice of the Sith Lord Darth Vader. A powerful Force-user who lived during the era of the Galactic Empire, Marek originated from the Wookiee home planet of Kashyyyk as the sole offspring of two Jedi Knights—Mallie and Kento Marek—who deserted the Jedi Order during the Clone Wars. Following the death of his mother, the young Marek’s father was killed in battle by Darth Vader. Though only a child, Marek possessed an exceptionally strong connection to the Force that the Dark Lord of the Sith sought to exploit.  (Source: Wookiepedia) REQUIRED ITEMS 1. Light tan tunic 2. Light tan hood attached to tunic 3. Matching light tan pants 4. 2 black shoulder bells w/ 6 ribs on each bell 5. Black Gloves 6. Dark khaki lower arm gauntlets from the elbow down to first row of knuckles 7. Off white tabbards (Front: 2 narrow tabbards reaching down to mid-shin Rear: one single tabbard reaching down to mid-calf, needs to be tapered in rear from the width of the shoulders at the top, to just inside width of waist) 8. Tabbards also needs to include a stiff collar at the neck (approx 1″) 9. Brown boots, rising above the ankle 10. 2 spats around the ankle that matches colour of tabbard, each spat has two clasps on both the inside and outside of spat 11. 2 spats from the ankle to just below the knee that matches colour of lower arm gauntlets, each spat has two clasps at the top on the outside of the leg 12. 4 separate black belts starting at the waist and going up (each belt approx 1″) each belt has a separate belt closure. The second belt from the bottom wraps inside the tabbard on the L side, and outside the tabbard on the R side 13. Inner belt inside of tabbards w/ silver hexagon buckle 14. 2 straps just above each knee each belt has a belt closure 15. 2 straps attached from hexagon buckle and descending to leg straps; each set of straps are connected behind the leg 16. Non-toy lightsaber hilt or custom lightsaber hilts are allowed 17. Short hair, does not have to be buzzed. But no long hair allowed FORMAL REQUIREMENTS – YOU MUST HAVE AT LEAST TWO 1. Narrow silverish piping around complete edge of tabbards 2. Three 1/2″ studs/rivets evenly spaced over the first row of knuckles on both lower arm gauntlets 3. Covertech Clip 4. Buzzed Starkiller hairstyle 5. Starkiller or Rahm Kota lightsaber hilt OPTIONAL ITEM 1. Aqua coloured lightsaber blade COSTUME RESOURCES The Art and Making of Star Wars: The Force Unleashed Star Wars: The Force Unleashed video game Star Wars: The Force Unleashed Novel PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Rahm Kota – TIE Factory (Jedi)

    Rahm Kota – TIE Factory (Jedi)

      CHARACTER DESCRIPTION Rahm Kota was a Human male who served as a Jedi Master and General during the Clone Wars. Born on a war-torn world, Kota fought in the trenches during the planet’s internal conflicts from the age of ten. At the age of eighteen, Kota met the Jedi Mace Windu, who had been dispatched to the planet to end the conflict peacefully. Discovering Kota’s Force-sensitivity, Windu took Kota back to the Jedi Temple on Coruscant to be trained as a Jedi. Despite being well over the traditional age of acceptance, Kota was schooled in the Force by Master Yoda. He took Falon Grey as his Padawan sometime before the Clone Wars, training him to Knighthood. During the Clone Wars, Kota was made a general in the Grand Army of the Republic. He did not believe that clone troopers were fit for battle, however, and refused to lead them. Instead, he commanded his own militia, comprised of volunteers.  (Source: Wookiepedia) REQUIRED ITEMS 1. Black or dark brown high-crew neck undershirt or equivalent dickey 2. Dark brown semi-fitted long sleeve tunic with kimono collar and 12-15″ sleeve wrist openings. Fabric may be crinkle or smooth textured and have red to olive tones 3. Dark grey or black fingerless gloves 4. Khaki or tan pants, stonewashed cotton or suede leather/ultra suede 5. Medium to dark brown knee-high leather or pleather boots with plain tops or Qui-Gon style cross straps 6. Dark brown Obi-Wan or Qui-Gon style jedi belt with no pouches, food caps, or saber clip 7. Medium to dark brown 3-4″ wide strap armour harness extending from back center of belt line in a “V” up over the shoulders. Can attach to breast plate and/or continue down front to belt line 8. Medium brown (red to olive tone) fabric tabards, extending from belt line to just above the knees 9. Medium brown (red to olive tones) fabric split-cape drapes over shoulders, mid-calf to ankle length in back. 18-24″ wide at bottom, tapered or gathered/pleated to go over shoulders. Can either be extension of tabards or separate pieces 10. Rigid weathered silver breast plate with belly control-box, extending from belt line to mid-upper chest 11. Rigid weathered silver shoulder bells, extending from slightly above the shoulder to mid upper arm 12. Dark brown leather bandoleer with rectangular buckle at chest level and single flap-closure pouch at belly level, extending from over right shoulder to left waist 13. Long black/silver lightsaber hilt. Can be attached at back of bandoleer or hand-held. If bladed, must be green blade 14. Slicked back or loose medium length (below ears) straight hair with minimum grey/white highlights 15. Goatee with grey/white highlights FOR FORMAL CLEARANCE THE FOLLOWING ITEMS ARE REQUIRED 1. Rigid weathered silver wrist gauntlets with narrow box/clip on one side, extending from wrist to mid forearm 2. Rigid weathered silver hand guards covering backs of hands 3. Boots should have Qui-Gon style cross-straps 4. Bandoleer should have cross-etch lines throughout, and a narrow center strap extending from the buckle over shoulder to back 5. Pants should have hidden/no back pockets 6. Hair/wig should be pulled in a top-knot high on back of head OPTIONAL ITEMS 1. Silver/white hair/goatee/eyebrows 2. Facial scars 3. Semi rigid/rigid saber holster attached to back of bandoleer 4. Rahm Kota style belt...

    read more

    Obi-Wan “Ben” Kenobi

    Obi-Wan “Ben” Kenobi

      CHARACTER DESCRIPTION Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter. His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area. It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life.  (Source: Wookiepedia) REQUIRED ITEMS 1. Beige outer tunic that reaches the feet 2. Brown mock long sleeved turtleneck 3. Beige scarf-style tabards 4. Beige obi 5. Reddish brown leather belt with rectangular metal buckle with rounded corners and lightsaber hook 6. Brown leather or leather-like boots 7. Leather banana-shaped belt pouch 8. A New Hope Hero lightsaber hilt 9. Brown robe with pointed hood 10. Costumer should have a beard. Costumer’s hair should be styled as seen in the movie. Wigs and prosthetics are allowed COSTUME RESOURCES Rebel Legion Jedi Tutorials Czech Obi-Wan Fansite Crazy Old Wizards Obi-Wan Costuming forum PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Obi-Wan Kenobi (Episode III)

    Obi-Wan Kenobi (Episode III)

      CHARACTER DESCRIPTION Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter. His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area. It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life.  (Source: Wookieepedia) REQUIRED ITEMS 1. Beige crinkle outer tunic, mid-thigh length, with shoulder tucks 2. Chocolate brown inner tunic with double fold collar 3. Beige crinkle tabards starting at the obi in rear and falling 3-4” below tunic bottom in front 4. Beige crinkle obi. Obi should extend 1-2” beyond top and bottom of belt, scrunched. Obi closure in the rear should be inconspicuous 5. Mustard or khaki coloured pants 6. Reddish brown leather belt with smaller inner strap held by 8 silver button studs and silver buckle 7. Covertec clip (original style) 8. Jedi food capsules, 2 silver, 2 gold, 2 bronze, 2 grey 9. Movie accurate small ribbed belt pouch 10. Movie accurate tall ribbed belt pouch 11. Movie accurate rectangular grapple & hook pouch 12. Movie accurate tall brown leather pouch 13. Revenge of the Sith Hero lightsaber hilt 14. Belt components should be arranged in the proper order 15. Reddish brown leather boots with spats, knee high; 1 strap at ankle 16. Hair should be styled as seen in the movie. Costumer should have a beard. Wigs and prosthetics are allowed OPTIONAL ITEMS 1. Brown hooded robe with shoulder tucks COSTUME RESOURCES Rebel Legion Jedi Tutorials Czech Obi-Wan Fansite Padawan’s Guide Jedi Commlink Tutorial Padawan’s Guide Jedi Food Capsule Tutorial Padawan’s Guide Jedi Belt Pouches Tutorial Padawan’s Guide Saber Clip Tutorial Parts of Star Wars Obi-Wan page Crazy Old Wizards Obi-Wan Costuming forum PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Obi-Wan (Episode II)

    Obi-Wan (Episode II)

      CHARACTER DESCRIPTION Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter. His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area. It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life.  (Source: Wookiepedia) REQUIRED ITEMS 1. Beige crinkle outer tunic, mid-thigh length, with shoulder tucks 2. Off-white/khaki crinkle inner tunic 3. Beige crinkle tabards starting at the obi in rear and falling approximately 3-5” below edge of outer tunic 4. Beige crinkle obi. Obi should extend 1-2” beyond top and bottom of belt 5. Khaki pants 6. Reddish brown leather belt with smaller inner strap held by 8 silver button studs and silver buckle 7. Covertec clip (original style) 8. Jedi food capsules, 3 silver, 3 gold, 3 bronze, 3 grey 9. Movie accurate small ribbed belt pouch 10. Movie accurate tall ribbed belt pouch 11. Movie accurate wide ribbed belt pouch 12. Attack of the Clones/TPM Hero lightsaber hilt 13. Belt components should be arranged in the proper order 14. Reddish brown leather boots with spats, knee high; 1 strap at ankle, 3 straps at calf 15. Hair should be styled as seen in the movie. Costumer should have a beard. Wigs and prosthetics are allowed OPTIONAL ITEMS 1. Brown hooded robe with shoulder tucks COSTUME RESOURCES Rebel Legion Jedi Tutorials Czech Obi-Wan Fansite Padawan’s Guide Jedi Commlink Tutorial Padawan’s Guide Jedi Food Capsule Tutorial Padawan’s Guide Jedi Belt Pouches Tutorial Padawan’s Guide Saber Clip Tutorial Parts of Star Wars Obi-Wan page Crazy Old Wizards Obi-Wan Costuming forum   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Obi-Wan Kenobi (Episode I)

    Obi-Wan Kenobi (Episode I)

      CHARACTER DESCRIPTION Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter. His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area. It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life.  (Source: Wookiepedia) REQUIRED ITEMS 1. Khaki crinkle outer tunic 2. Khaki crinkle inner tunic 3. Khaki crinkle tabards starting at the obi in rear and falling 1-2″ below tunic bottom in front 4. Khaki crinkle obi. Obi should extend approximately 1” beyond top and bottom of belt, scrunched 5. Khaki pants 6. Reddish brown wide leather belt with smaller inner belt held by 8 silver button studs and silver buckle 7. Covertec clip (original style) 8. Jedi food capsules, 8 gold and 4 silver 9. 2 movie accurate tall brown ribbed belt pouches 10. Movie accurate wide brown ribbed belt pouch 11. The Phantom Menace Hero lightsaber hilt 12. Belt components should be arranged in the proper order 13. Reddish-brown boots with spats, knee high; 1 strap at ankle, 3 straps at calf 14. Padawan braid 15. Short hairstyle; no long hair allowed. Costumer must be clean shaven OPTIONAL ITEMS 1. Brown hooded robe 2. Matching lining on sleeves of outer tunic 3. Buzz cut Padawan hairstyle with knot in back of head COSTUME RESOURCES Rebel Legion Jedi Tutorials Padawan’s Guide Jedi Commlink Tutorial Padawan’s Guide Jedi Food Capsule Tutorial Padawan’s Guide Jedi Belt Pouches Tutorial Padawan’s Guide Saber Clip Tutorial Parts of Star Wars Obi-Wan page Crazy Old Wizards Obi-Wan Costuming forum PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Obi-Wan Kenobi (Clone Wars V2, General)

    Obi-Wan Kenobi (Clone Wars V2, General)

    CHARACTER DESCRIPTION Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter. His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area. It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life.  (Source: Wookiepedia) REQUIRED ITEMS 1. Clone armour (chest, elbows, forearms, hands, knees, shins, belt, boots). 2. Tan sleeveless outer tunic. 3. Brown mock turtleneck undersuit. 4. Brown gloves. 5. Brown hooded cape. 6. Revenge of the Sith Hero lightsaber hilt. COSTUME RESOURCES Crazy Old Wizards costuming forum PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more