Jedi




  • Shado Vao

    Shado Vao

      CHARACTER DESCRIPTION Shado Vao was a male Rutian Twi’lek Jedi Master who was the apprentice of Kol Skywalker and a close friend to Kol’s son, Cade Skywalker during the time of the Sith–Imperial War and the subsequent Second Imperial Civil War against Darth Krayt and the One Sith. (Source: Wookieepedia) REQUIRED ITEMS 1. Body: Blue coloured skin (matching the lekku). 2. Headgear: Black Headpiece that covers the head, and approximately the first 1/3 of the lekkus and a part of the face. Black stripes. 3. Collar: High, brown leather or leather-like collar with hole – pattern. It is in the front open and will be closed with a small rack at the bottom. 4. Inner tunic: Black inner tunic. 5. Outer tunic: Light grey outer tunic with wide sleeves that are covered with bracers at the forearm. 6. Plaid: Grey sleeveless plaid that lasts at least over the knees and is open on both sides. 7. Obi: Same colour as the inner tunic. 8. Trousers: Same colour as the outer tunic. 9. Belt: Brown leather or leather like belt in the same colour as the collar. Big square silver/metal belt buckle, the buckle has 2 level slots, fixed with 2 rivets on each side (like seen on the pictures) 4 square brown pouches. 10. Tabard: One big leather or leather like tabard with hole-pattern (same colour and pattern like the collar). It covers the whole belly down to the crotch. 11. Bracers: Brown leather or leather like bracers with hole-pattern (same colour and pattern as collar and tabard) The bracers covers the forearm. On the inner side they are fixed with 2 straps made out of the same material. 12. Gloves: Black gloves that covers the knuckles up to the forearm. (under the bracers). The fingers are not covered. 13. Boots: Black knee high boots. The shin is covered by a metal plate (from ankle to just below the edge of the boots) 14. Lightsabre: Blue double bladed lightsaber with silver/metall hilt. (no toy or Ultimate FX sabers allowed). COSTUME RESOURCES KJO Detachment Standard written by Author: Lokrin (Florian) Standard reviewed by the Costume Standards Committee: 22 November 2016 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the Detachment Officer for your category about parts/materials you are considering before you start your build, or post a ‘Work in Progress’ (WIP) thread on the forum. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Xiaan Amersu (Aayla Secura Comic)

    Xiaan Amersu (Aayla Secura Comic)

      CHARACTER DESCRIPTION Xiaan Amersu was a female Rutian Twi’lek Jedi Knight who fought during the Clone Wars. She was the Padawan of J’Mikel, an Anx Jedi killed by the bounty hunter Aurra Sing. (Source: Wookieepedia) REQUIRED ITEMS 1. Body: Blue-Green body colour. 2. Lekku: Lekku matching body colour. 3. Headgear: Dark brown leather or leather like headgear with a silver metal ornament with wide bands above the tips of the lekku. 4. Ear caps: Ear caps matching body colour. 5. Top: Light brown lowcut tunic/shirt with long, loose sleeves and long, fitted sleeves. Can be made as two shirts/tunics. 6. Tabards: Medium to dark brown tabards which reach below the knee (front and back) and are pointed to the inner side. The tabards are wider than usual and go over the edge of the shoulders. They must not sag. 7. Obi: Medium to dark brown obi. Must match tabards 8. Leggings: Light brown leggings. 9. Belt/aprons: Dark brown leather or leather-like jedi belt with silver buckle. 10. Boots: Dark brown over knee leather or leather-like boots. 11. Covertec clip: Covertec clip (original style). 12. Lightsaber: 1 silver Lightsabers (no toy or Ultimate FX sabers allowed). OPTIONAL ITEMS 1. Lightsaber: A second silver Lightsaberhilt. COSTUME RESOURCES KJO Detachment Standard written by Author: Leroni Verderoc Standard reviewed by the Costume Standards Committee 22 November 2016 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the Detachment Officer for your category about parts/materials you are considering before you start your build, or post a ‘Work in Progress’ (WIP) thread on the forum. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Luke Skywalker (TFA)

    Luke Skywalker (TFA)

      CHARACTER DESCRIPTION Luke Skywalker was a Force-sensitive human male Jedi Master who was instrumental in defeating the Galactic Empire and the Sith during the Galactic Civil War. (Source: Wookieepedia) REQUIRED ITEMS 1. Shirt/inner tunic: Same style as ROTJ with a closed bib and mandarin collar. Shirt is white/off-white and should not be see-through. Mandarin collar should be fitted with a small opening in front. Sleeves should be mostly fitted until mid forearm, where the cuff starts. Cuff is fitted and closed with three (3) hidden snaps/press studs or similar, double-length cuff (approximately 10cm/4″ long). Shirt goes over pants and stop at top of thigh. 2. Vest/outer tunic: Textured and nubby beige/dark cream fabric, sleeveless with large split under the arm until just above the obi. It is split again in the sides just below the obi and hangs straight down. The vest overlap slightly in front at the waistline, right over left. The vest ends just above the ankles. 3. Tabard/stole: Textured fabric in beige/cream, preferably a lighter shade than the vest, obi, and pants. Ends at the ankles/instep, longer than vest. 4. Obi: Same fabric and color as vest. Should be roughly 1 inch/2.5cm wider than the belt on both sides. No front closure. 5. Pants: Loose fitting textured and nubby fabric in beige/dark cream. Should be the same fabric as vest and obi. Pants are tucked into the boots/boot wraps. 6. Belt: Wide brown leather (or leather-like) belt with slim sewn on borders in the same material. It has a large hexagonal buckle with a hammered and weathered look. The buckle should be as big as the belt or a tiny bit larger and follow a 3 high, 5 wide rule in dimensions. There should be a pair of rivets on the left side of the belt. The rivets can hold an OT style saber clip. There must be a rectangular pouch on the right side of the belt in a simple style according to references.  7. Cloak: Coarse, heavily textured material in a medium gray-brown color. Cloak has a large hood that rests on the shoulders when up. Cloak is open in front and kept in place with two white straps that goes under the arm and ties in the back. Straps should be hidden as much as possible. Cloak reaches ground and may not have any raw edges. It should have an arched seam in the back going to the sides with the highest point of the arch being around upper knee to mid thigh. Cloak can be sewn unto tabards/stole. 8. Boots: Similar to ANH in a tan/sand/beige color. Boots should be suede or similar and no higher than mid calf. The boots should be wrapped from ankle and up to mid calf in a material similar in color to the boots. (Wraps are also referred to as puttees). They must have a thick sole in rubber/foam or similar in a color matching the boots. Boots and wraps should closely match the pants. 9. Mechanical hand: Weathered metallic/aluminium colored and plated glove or prop instead of the right hand. 10. Hair: Styled like in movie, preferably in a salt-and-pepper style in light colors. 11. Beard: A full beard in grey and white. Has large white patches on both sides of the chin. Note: All clothing items...

    read more

    Petro (Jedi Youngling TCW)

    Petro (Jedi Youngling TCW)

    Petro was a Human male Jedi Youngling who served the Jedi Order during the Clone Wars.

    read more

    Ahsoka Tano (Star Wars Rebels)

    Ahsoka Tano (Star Wars Rebels)

      CHARACTER DESCRIPTION Ahsoka Tano, nicknamed Snips by her master, was a Togruta female from the planet Shili who trained as a Jedi apprentice during the Clone Wars, the conflict between the Galactic Republic and the Confederacy of Independent Systems. Tano was assigned to Jedi Knight Anakin Skywalker by Jedi Grand Master Yoda, and she demonstrated an eagerness to prove herself worthy to be his apprentice. Tano was involved in the defeat of the Separatist army on the planet Christophsis and was important to Republic efforts during the Battle of Teth. Along with Skywalker, Tano was instrumental in acquiring the Republic’s safe passage through Hutt Space, due to her part in rescuing the son of Jabba the Hutt, which ensured an alliance between the Republic and the Hutt clans. (Source: Wookieepedia) REQUIRED ITEMS 1. Headpiece: Togruta lekku in white with blue unequal stripes as similar as possible to reference image, dark plum/ dark claret and silver colored diadem that reaches the cheekbones, the central diamond has to be of a slightly brighter silver. The lekku materials have to give a skin effect. They have to reach down the chest. 2. Gloves: Gloves coverings the arms made of the same fabric and color as the dress , they have to reach quite high on the arms and be quite tight, they have to have a half circle opening onto the high part and an opening to place a thumb in the low part. 3. Dress: Dark grey dress, elastic and tight cloth, small V rip on the neck that can’t be seen the end as it is covered from the armor. The cloth has to reach the neck and follow behind forming a collar. The opening of the sleeves has to show a large part of the shoulder. The front skirt has to have a U shape and be a little bit shorter behind. 4. Leggings: Leggings or covering black or dark grey or dark brown socks 5. Underbelt: Grey under belt lighter than the dress, with a chamois effect fabric. It has to be narrower in front below the navel more or less at the belt hole, and open as a wave onto the sides, then close behind slightly larger than in front. 6. Belt: Skin black or dark brown belt or skin alike that closes in front, on both sides on a grey colored ring, hanging is another small belt piece part to which the armor is connected, at the back exactly in the center there has to be a rectangular part slightly bigger, from where a small segment is used to hang a part of the armor. There are 4 silver/grey buttons at the corners of the rectangle pieces in the back, 2 on the edges on the belt were it closes in front, and 1 on the piece were the armor hangs at the front.  7. Armour: a) chest part: rounding shape that starts over the chest and reaches up to the end of the breastbone, large up to the beginning of the underarm. Dark plum /dark garnet color in the center, with a half centimeter silver edge, the gap between the two colors has to be interrupted by a groove in order to better show the depth. In the low part center there has to be...

    read more

    Rey (Resistance Outfit)

    Rey (Resistance Outfit)

    Rey was a human female scavenger who discovered her latent Force-sensitivity

    read more

    Jedi Temple Guard (The Clone Wars)

    Jedi Temple Guard (The Clone Wars)

    Jedi Temple Guards were part of the Jedi Order

    read more

    Ahsoka Tano (Clone Wars Season 3-5)

    Ahsoka Tano (Clone Wars Season 3-5)

    Ahsoka Tano, nicknamed Snips by her master, was a Togruta female from the planet Shili who trained as a Jedi apprentice during the Clone Wars

    read more

    Juhani (Knights of the Old Republic)

    Juhani (Knights of the Old Republic)

      CHARACTER DESCRIPTION Juhani was a Cathar female and a Knight in the Jedi Order during the Jedi Civil War. Juhani grew up on the planet Taris after her family escaped the assault on their homeworld during the Mandalorian Wars. In addition experiencing great hardship and xenophobic discrimination, Juhani was sold into slavery after the death of her parents in order to pay off their debts. Juhani was eventually discovered to be Force-sensitive by the Jedi Knight Revan, and freed from her servitude. She then made her way to the Jedi Enclave on Dantooine and was accepted for Jedi training by Jedi Master Quatra..  (Source: Wookieepedia) REQUIRED ITEMS 1. Teal matte body suit. Body suit must not be baggy or have any visible closures. The only skin that should be visible are hands and face. 2. Leather or leather-like medium browns vest, hip length. two center front panels taper down the front, wider at the shoulder than the waist with a center front closure in the darker medium brown, clasped with three thin metal clasps silver or light gold in color. There are two lighter brown side panels and a single knee-length ‘tail’ panel in the back in the darker medium brown. There must be an accurate layered collar piece with no center front seam and a high, rounded collar. 3. Leather or leather-like ovular shoulder pauldrons with rounded tube-like edging and two decorative panels on top. Pauldrons should match the darker color(s) of the vest. 4. Leather or leather-like arm guards with rounded rectangular decoration on the forearm extending from the elbow and stopping short of the wrist. 5. Knee-high boots, spats, or boots/spats combination in the same color as the vest. Boots should have heels no higher than 2 inches (5 cm). The back of the leg should have ribbed-looking texture while the front should appear leather-like. There should be four thin straps of a slightly darker brown color across the back of the boot leg without visible clasps. 6. Thin brown leather or leather-like belt with a rectangular shiny belt buckle (silver or light gold color). One brown leather or leather-like belt pouch on the right hip. The belt and pouch should be a darker brown color.  7. Lightsaber; blue/cyan colored blade if blade is present. 8. Head must appear to be bald except for a high ponytail. The ponytail should be held up with a metallic gold wrapped cord or stacked gold rings at the base. Ponytail hair should be separated into many thin braids, no fewer than 8 individual braids. Each braid should be tipped with a long, cylindrical gold bead. Natural hair colors only, black or dark brown recommended. Bald caps, if used, must be applied neatly and should be made up naturally so as not to look obvious. 9. Brown tabby cat stripes on the front and back of the head in either makeup or imitation fur. 10. Costumer should wear slightly pointed ears. Ear tips should match the costumer’s skin tone and applied neatly with makeup so that seams are not obvious. COSTUME RESOURCES KJO Detachment page Standard written by Author: Jenna (SongOfAmazon) Standard reviewed by the Costume Standards Committee 5 July 2016 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will...

    read more

    Mara Jade (Green dress)

    Mara Jade (Green dress)

    Mara Jade Skywalker was, during different times in her life, an Emperor’s Hand, a smuggler, and later a Jedi Master who sat upon the Jedi High Council. She was raised as a servant to Emperor Palpatine and became a high-level Force-using operative. After Palpatine’s death, she received his last command, which was to kill Luke Skywalker; however, the death of her Master caused her to go rogue. Eventually she joined smuggler chief Talon Karrde, becoming one of his best smugglers and his second-in-command. During the predations of Grand Admiral Thrawn, she was forced to work with Skywalker, and developed a grudging respect for him. During the Galactic Civil War, Mara Jade proved herself skilled in a variety of fields; she was a good pilot and mechanic and trained in the use of both a blaster and hand-to-hand combat even without relying on the Force.

    read more

    A’Sharad Hett (Before/After Order 66)

    A’Sharad Hett (Before/After Order 66)

    Darth Krayt, born A’Sharad Hett, was a Human male who served as a Jedi Master in the waning days of the Galactic Republic.  The son of legendary Jedi Knight Sharad Hett and his wife K’Sheek, both of whom lived among the Tusken Raiders of Tatooine, he eventually became the Padawan of Jedi Masters Ki-Adi-Mundi, and later, An’ya Kuro.

    read more

    SWTOR Relnex style Jedi Robes

    SWTOR Relnex style Jedi Robes

    CHARACTER DESCRIPTION

    The Jedi Order, later known as the Old Jedi Order and referred to as the Holy Order of the Jedi Knights, was an ancient monastic peacekeeping organization unified by its belief and observance of the Force, specifically the light side.

    read more

    Satele Shan

    Satele Shan

    CHARACTER DESCRIPTION

    Satele Shan was a human female who served as the Jedi Order’s Grand Master during the Cold War and the Galactic War between the Galactic Republic and the Sith Empire.  The daughter of Jedi Knight Tasiele Shan, who was herself a descendant of the legendary Jedi Knights Revan and Bastila Shan, Satele was born on the planet Brentaal IV in the year 3699 BBY.  Inheriting her family’s Force-sensitivity, she was inducted into the Jedi Order and became the Padawan of Jedi Master Ngani Zho, though she later traveled to the Sith homeworld of Korriban to study under the Zabrak Battlemaster Kao Cen Darach.

    read more

    Obi Wan Kenobi (Mandalorian Super Commando Armour)

    Obi Wan Kenobi (Mandalorian Super Commando Armour)

    CHARACTER DESCRIPTION

    Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter.  His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area.  It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life.

    read more

    Kanan Jarrus

    Kanan Jarrus

    CHARACTER DESCRIPTION

    Kanan Jarrus, born Caleb Dume, was a Human male Jedi Padawan who survived Order 66.  Going into hiding, he forsook the Jedi ways for sometime, swapping his blue-bladed lightsaber for a blaster. Eventually, he would come to command the VCX-100 light freighter Ghost several years before the Battle of Yavin.  While cocky and often sarcastic, Jarrus was eager to help out and fight the Galactic Empire.  Five years before the Battle of Yavin, Jarrus met Ezra Bridger, a fourteen-year-old Force-sensitive Human, whom he decided to mentor.

    read more

    Generic KOTOR I Jedi

    Generic KOTOR I Jedi

    CHARACTER DESCRIPTION

    KOTOR I Generic Jedi Generic Jedi Knights Of The Old Republic from the computer game.

    read more

    Luke Skywalker (Jedi Academy Robes)

    Luke Skywalker (Jedi Academy Robes)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Death Star Duel)

    Luke Skywalker (Death Star Duel)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Endor Strike Team)

    Luke Skywalker (Endor Strike Team)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Jabba’s Palace / Sarlaac Pit)

    Luke Skywalker (Jabba’s Palace / Sarlaac Pit)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more