Full Costume List




  • Petro (Jedi Youngling TCW)

    Petro (Jedi Youngling TCW)

    Petro was a Human male Jedi Youngling who served the Jedi Order during the Clone Wars.

    read more

    Ahsoka Tano (Star Wars Rebels)

    Ahsoka Tano (Star Wars Rebels)

      CHARACTER DESCRIPTION Ahsoka Tano, nicknamed Snips by her master, was a Togruta female from the planet Shili who trained as a Jedi apprentice during the Clone Wars, the conflict between the Galactic Republic and the Confederacy of Independent Systems. Tano was assigned to Jedi Knight Anakin Skywalker by Jedi Grand Master Yoda, and she demonstrated an eagerness to prove herself worthy to be his apprentice. Tano was involved in the defeat of the Separatist army on the planet Christophsis and was important to Republic efforts during the Battle of Teth. Along with Skywalker, Tano was instrumental in acquiring the Republic’s safe passage through Hutt Space, due to her part in rescuing the son of Jabba the Hutt, which ensured an alliance between the Republic and the Hutt clans. (Source: Wookieepedia) REQUIRED ITEMS 1. Headpiece: Togruta lekku in white with blue unequal stripes as similar as possible to reference image, dark plum/ dark claret and silver colored diadem that reaches the cheekbones, the central diamond has to be of a slightly brighter silver. The lekku materials have to give a skin effect. They have to reach down the chest. 2. Gloves: Gloves coverings the arms made of the same fabric and color as the dress , they have to reach quite high on the arms and be quite tight, they have to have a half circle opening onto the high part and an opening to place a thumb in the low part. 3. Dress: Dark grey dress, elastic and tight cloth, small V rip on the neck that can’t be seen the end as it is covered from the armor. The cloth has to reach the neck and follow behind forming a collar. The opening of the sleeves has to show a large part of the shoulder. The front skirt has to have a U shape and be a little bit shorter behind. 4. Leggings: Leggings or covering black or dark grey or dark brown socks 5. Underbelt: Grey under belt lighter than the dress, with a chamois effect fabric. It has to be narrower in front below the navel more or less at the belt hole, and open as a wave onto the sides, then close behind slightly larger than in front. 6. Belt: Skin black or dark brown belt or skin alike that closes in front, on both sides on a grey colored ring, hanging is another small belt piece part to which the armor is connected, at the back exactly in the center there has to be a rectangular part slightly bigger, from where a small segment is used to hang a part of the armor. There are 4 silver/grey buttons at the corners of the rectangle pieces in the back, 2 on the edges on the belt were it closes in front, and 1 on the piece were the armor hangs at the front.  7. Armour: a) chest part: rounding shape that starts over the chest and reaches up to the end of the breastbone, large up to the beginning of the underarm. Dark plum /dark garnet color in the center, with a half centimeter silver edge, the gap between the two colors has to be interrupted by a groove in order to better show the depth. In the low part center there has to be...

    read more

    Resistance Pilot (generic)

    Resistance Pilot (generic)

    Resistance pilots were pilots who served the Resistance under it’s starfighter corps.

    read more

    Rey (Resistance Outfit)

    Rey (Resistance Outfit)

    Rey was a human female scavenger who discovered her latent Force-sensitivity

    read more

    Jedi Temple Guard (The Clone Wars)

    Jedi Temple Guard (The Clone Wars)

    Jedi Temple Guards were part of the Jedi Order

    read more

    Rey-Jakku-scavenger

    Rey-Jakku-scavenger

     

    CHARACTER DESCRIPTION

    Rey was a human female scavenger who discovered her latent Force-sensitivity while on a quest to find the legendary Jedi Master Luke Skywalker and bring a new hope to a galaxy on the brink of war.

    Source Wookieepedia

    read more

    Ahsoka Tano (Clone Wars Season 3-5)

    Ahsoka Tano (Clone Wars Season 3-5)

    Ahsoka Tano, nicknamed Snips by her master, was a Togruta female from the planet Shili who trained as a Jedi apprentice during the Clone Wars

    read more

    Juhani (Knights of the Old Republic)

    Juhani (Knights of the Old Republic)

      CHARACTER DESCRIPTION Juhani was a Cathar female and a Knight in the Jedi Order during the Jedi Civil War. Juhani grew up on the planet Taris after her family escaped the assault on their homeworld during the Mandalorian Wars. In addition experiencing great hardship and xenophobic discrimination, Juhani was sold into slavery after the death of her parents in order to pay off their debts. Juhani was eventually discovered to be Force-sensitive by the Jedi Knight Revan, and freed from her servitude. She then made her way to the Jedi Enclave on Dantooine and was accepted for Jedi training by Jedi Master Quatra..  (Source: Wookieepedia) REQUIRED ITEMS 1. Teal matte body suit. Body suit must not be baggy or have any visible closures. The only skin that should be visible are hands and face. 2. Leather or leather-like medium browns vest, hip length. two center front panels taper down the front, wider at the shoulder than the waist with a center front closure in the darker medium brown, clasped with three thin metal clasps silver or light gold in color. There are two lighter brown side panels and a single knee-length ‘tail’ panel in the back in the darker medium brown. There must be an accurate layered collar piece with no center front seam and a high, rounded collar. 3. Leather or leather-like ovular shoulder pauldrons with rounded tube-like edging and two decorative panels on top. Pauldrons should match the darker color(s) of the vest. 4. Leather or leather-like arm guards with rounded rectangular decoration on the forearm extending from the elbow and stopping short of the wrist. 5. Knee-high boots, spats, or boots/spats combination in the same color as the vest. Boots should have heels no higher than 2 inches (5 cm). The back of the leg should have ribbed-looking texture while the front should appear leather-like. There should be four thin straps of a slightly darker brown color across the back of the boot leg without visible clasps. 6. Thin brown leather or leather-like belt with a rectangular shiny belt buckle (silver or light gold color). One brown leather or leather-like belt pouch on the right hip. The belt and pouch should be a darker brown color.  7. Lightsaber; blue/cyan colored blade if blade is present. 8. Head must appear to be bald except for a high ponytail. The ponytail should be held up with a metallic gold wrapped cord or stacked gold rings at the base. Ponytail hair should be separated into many thin braids, no fewer than 8 individual braids. Each braid should be tipped with a long, cylindrical gold bead. Natural hair colors only, black or dark brown recommended. Bald caps, if used, must be applied neatly and should be made up naturally so as not to look obvious. 9. Brown tabby cat stripes on the front and back of the head in either makeup or imitation fur. 10. Costumer should wear slightly pointed ears. Ear tips should match the costumer’s skin tone and applied neatly with makeup so that seams are not obvious. COSTUME RESOURCES KJO Detachment page Standard written by Author: Jenna (SongOfAmazon) Standard reviewed by the Costume Standards Committee 5 July 2016 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will...

    read more

    Hoth Officer

    Hoth Officer

    CHARACTER DESCRIPTION An example of a Hoth Officer is Toryn Farr, who was a Human female who served as a communications officer in the Rebel Alliance during the Galactic Civil War.  Three years after the Battle of Yavin, she was stationed in Echo Base on the planet Hoth and coordinated the defense and evacuation of the planet from the control room.  She was one of the last officers to leave Hoth, escaping on the final transport Bright Hope. Source: Wookieepedia REQUIRED ITEMS 1. Boots Grey/light blue quilted fabric boots.  Flat soled without straps or embellishments.  Boot height should be at least over the calf, just short of knee height. 2. Jumpsuit Medium grey jumpsuit of a medium weight fabric with long sleeves that end in a cuff.  The jumpsuit has a mandarin collar with a flap that goes from right to left.  There must be a patch pocket on each upper thigh, a code cylinder pocket on the upper left arm, and an empty comm pad pocket on the lower left arm. 3. Screen accurate code cylinders/arm tools in upper arm pocket. 4. Screen accurate cloth insignia sewn onto upper right arm of jumpsuit, consisting of white cloth with black grid of 9 squares with no outside border, with an orange and red rectangle painted within two of the squares and black ‘crosshair-style’ markings in other two squares. 5. Vest Beige or tan sleeveless vest with a puffy, padded collar, front pockets, and a rectangular, open rank badge pocket on the front left chest.  The bottom two-thirds of the vest should be quilted to match reference photos.  The vest has no fastenings. 6. Rank badge Screen accurate rank badge on vest, in the left chest pocket. OPTIONAL Earphones- vintage radio/military/aviation headphones, must be screen accurate. COSTUME RESOURCES Rebel Commanders forum Standard reviewed by the Costume Standards Committee 8 March 2016 Standard written by Suzi Stelling (suzijedi) PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Major Kalonia

    Major Kalonia

    CHARACTER DESCRIPTION Major Kalonia was a human female who served as a doctor with the Resistance. She was stationed on the Resistance base on D’Qar thirty years after the Battle of Endor. Source: Wookieepedia   REQUIRED ITEMS 1. Shirt Medium-weight fabric, off-white color long-sleeved shirt with stand-up collar. Worn open at the top with no visible fastenings. 2. Vest Tunic style vest, brown or dark olive colored medium-weight fabric. Folds over to the right with no visible fastening. 3. Trousers Medium-weight fabric plain black pants with no ornamentation. 4. Belt 2″ dark brown leather belt with plain, rectangular buckle of dark silver or pewter color. 5. Boots Black boots that go up almost to the knee with rounded toes, straps with buckles at top and at ankle. Flat soled or very low heeled (1 inch maximum heel, no spike heels). 6. Hair Medium length naturally colored hair. 7. Rank Badge Screen accurate badge of a Resistance officer, rank of Major. 8. Arm Band Dark blue fabric, 4″ wide, with 2″ high Aurebesh lettering in white on band that translates to MEDIC. Worn on upper left arm. OPTIONAL ITEMS Medical Kit. Aluminum case with foam padding inside to hold various pieces of equipment (Healing Generators, Bacta Bulbs and Synthflesh Dispensers)   COSTUME RESOURCES Rebel Commanders forum Standard reviewed by the Costume Standards Committee 8 March 2016 Standard written by Tom Schobert (TFS) PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Admiral Ackbar (TFA)

    Admiral Ackbar (TFA)

    CHARACTER DESCRIPTION Admiral Gial Ackbar is a fictional character in the Star Wars saga. A member of the amphibious Mon Calamari species, Ackbar was the foremost military commander of the Rebel Alliance who led major combat operations against the Galactic Empire.  Ackbar played a supporting role in the 1983 film Return of the Jedi, and later became a prominent character in the novels, comic books and other media of the Star Wars expanded universe. Source: Wookieepedia REQUIRED ITEMS 1. Prosthetics Screen accurate Admiral Ackbar head and hands. 2. Tunic Off-white or ivory colored shirt with a rounded neckline and three-quarter length sleeves. Sleeves should be worn over the edges of prosthetic hands.  The fabric may have a slight texture, and should not be opaque. 3. Vest A vest of a dark olive green / brown color that overlaps from the left to the right side, with no visible closures.  Two patch pockets, one on each side, situated below the waistline and ending just above the hem.  Vest fabric should be of a medium weight to ensure a proper drape. 4. Trousers Loose fitting, dark brown trousers of a medium weight, flat finish (not shiny) fabric. 5. Belt Dark brown leather (or leather like) belt, two inches wide with a rectangular buckle of a weathered silver color. 6. Boots Dark brown, leather (or leather like), flat soled boots, slightly shorter than knee length (over the calf) with a strap on the outside of the top. 7. Rank Badge Screen accurate accurate rank badge.   COSTUME RESOURCES Rebel Commanders forum Standard reviewed by the Costume Standards Committee 8 March 2016 Standard written by Marie Cannon (Granny-Wan) PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    General Leia Organa

    General Leia Organa

    CHARACTER DESCRIPTION Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order.  The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan.  An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. Source: Wookieepedia REQUIRED ITEMS 1. Jumpsuit (or shirt and pants) A grayish-sage green jumpsuit in a medium weight fabric with a yoke and turned over collar, three-quarter length sleeves with an upturned cuff.  The left sleeve has a vertical pocket approximately 3 inches wide and 5 inches long. The front closure of the jumpsuit is covered by a flap of fabric.  The front is worn with the collar open and folder back.  There are no visible fastenings. A shirt and pants are acceptable if constructed of the same fabric. No visible pockets or other embellishments. 2. Vest A dark plum/purple vest, mid-thigh in length, made from a linen-like textured fabric. The vest has two back pieces, joined together at the center back, with a one-piece yoke than extends from the shoulder blades in the back to the hem in front (there are no shoulder seams), attached with princess seams. The yoke is not connected to the vest at the arm holes, and two layers of fabric are visible there. The vest must have one patch pocket on each side of the vest, attached between the side seam and sewn over the yoke piece in the front. 3. Belt A black leather or leather like belt, two inches wide with a screen accurate belt buckle. 4. Boots Brown boots that go almost up to the knee, with a rounded toe.  A low wedge heel or flat soled.  No chunk or spike heels. 5. Hair Naturally occurring hair colors only.  No bangs.  Hair should be styled appropriately as shown on screen. OPTIONAL   7. Screen accurate ring with silver wire and two blue stones, worn on the ring finger of the right hand. COSTUME RESOURCES Rebel Commanders forum Standard reviewed by the Costume Standards Committee 8 March 2016 Standard written by Johanna Nybelius, et al PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Yavin Communication Officer

    Yavin Communication Officer

      CHARACTER DESCRIPTION The Yavin Communication Officers are communications and sensors experts.  They serve at Massassi Station tracking the battle over the first Death Star. Del Goren is the most recognisable of the officers as it was he who warned the squad leaders of the approaching TIE fighters.   REQUIRED ITEMS 1. Khaki/tan shirt with bib in front. Bib should cover buttons including one at the collar. No button-down shirts. Shirt is a lighter shade than pants. 2. Khaki/tan trousers with solid dark brown or black stripe on side of each leg. Pants are a darker shade than shirt. 3. Brown belt (1 ½ to 2 in, range tan or canyon tan) with octagonal buckle. Two metal boxes (app. 2 ½” W x 4” L x 1” D) attached vertically. 4. Tall boots (14-16 inch shaft), riding boots recommended.  Brown boots are preferred, but black are acceptable.  No straps, buckles/laces or obviously visible zippers. 5. Accurate headset. COSTUME RESOURCES Rebel Commanders forum Standard reviewed by the Costume Standards Committee 15 August 2015 Standard written by Paul Land (Landeaux) PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Ord Mantell Officer (Star Wars: TOR)

    Ord Mantell Officer (Star Wars: TOR)

      CHARACTER DESCRIPTION Star Wars: The Old Republic is a massively multiplayer online role-playing game (MMORPG) based in the Star Wars universe. Source Wookieepedia REQUIRED ITEMS 1. Shirt: Burnt orange, short sleeved shirt with collar and black yoke. Shirt has a double seam down the center front, no visible buttons. Sleeves should end no longer than two inches above the elbow. Yoke extends to the back of the shirt, and ends approximately at the shoulder blades. Right sleeve has a three dimensional pocket with a flap that closes with a snap. This pocket should be black. Rank pins on collar. Long black under sleeves. Yoke, pocket, and undersleeves should be the same shade of black, preferably the same fabric. 2. Trousers: Close fitting black pants with panel or pocket on the side of each thigh. Should be the same shade of black as the under sleeves and shirt yoke. No front or rear pockets. 3. Belt: Black leather, 2.5 to 3 inches wide. Large metal buckle, rectangular shaped. 4. Boots: Black leather or leather like, flat heeled boots.  No visible zippers or buckles.  Boots should end below the knee (approx 11-13 inches tall). Narrow strap around right boot holds metal colored flares. 5. Chest Harness: Leather or leather like straps as shown (holster and pistol optional). 6. Gloves: Black gloves with a flared wrist, and black bracers. 7. Crotch Harness: Leather or leather like straps as shown. 8. Pouches: Two medium sized (approx 4 x 6) black leather pouches with flaps that close with a snap. OPTIONAL ITEM OPTION TO BE GENERAL VANDER: 1. Black shoulder armor on left side extends to hem of the left sleeve. 2. Accurate hair. 3. Cybernetic implant above left eye. COSTUME RESOURCES Rebel Commanders forum Standard reviewed by the Costume Standards Committee 15 August 2015 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Ilum Officer (Star Wars: TOR)

    Ilum Officer (Star Wars: TOR)

      CHARACTER DESCRIPTION Star Wars: The Old Republic is a massively multiplayer online role-playing game (MMORPG) based in the Star Wars universe. Source Wookieepedia REQUIRED ITEMS 1. Shirt: Medium gray, short sleeved, pull over shirt with collar. Sleeves should be no longer than two inches above the elbow. Right sleeve has a three dimensional pocket with a flap that closes with a snap. This pocket should be gray, the same fabric as the shirt. Rank pins on collar. Long dark gray under sleeves with a patch near each wrist, and a metallic embellishment at the wrist, as shown. Under sleeves and pants should be the same shade of gray, preferably the same fabric. Each shoulder has a patch of a golden brown material as shown. 2. Trousers: Close fitting dark gray pants, no front or rear pockets.  Left side has a patch pocket, approx 4 inches wide with a flap with a snap closure. 3. Belt: Medium gray leather, 2.5 to 3 inches wide.  Large metal buckle, rectangular shaped.  There are six vertical metallic embellishments evenly spaced. 4. Boots: Medium gray leather or leather like spats over brown or black flat heeled boots. No visible zippers or buckles. Boots should end below the knee. (Approx 11-12 inches tall). Narrow strap around right boot holds three metal colored flares. 5. Chest Harness: Leather or leather like straps as shown (pistol optional). 6. Gloves: Medium to dark brown leather gloves, wrist length, with flared wrist. OPTIONAL ITEM OPTION TO BE SUPREME COMMANDER RANS: 1. Dark gray shoulder armor on left side extends to hem of the left sleeve. 2. Black hair and goatee. COSTUME RESOURCES Rebel Commanders forum Standard reviewed by the Costume Standards Committee 15 August 2015 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Coruscant Officer (Star Wars: TOR)

    Coruscant Officer (Star Wars: TOR)

      CHARACTER DESCRIPTION Star Wars: The Old Republic is a massively multiplayer online role-playing game (MMORPG) based in the Star Wars universe. Source Wookieepedia     REQUIRED ITEMS 1. Shirt: Tan short sleeve pullover shirt with collar. Sleeves should end no longer than one inch above the elbow. Each sleeve has a band of darker tan material, approx. 1 – 1.5 inches wide. Shirt has a three dimensional pocket on the right sleeve, with a flap with a snap closure. The left sleeve has a patch of the same color fabric. Each shoulder has a patch of a golden brown material as shown. Tan undersleeves. Rank collar pins. 2. Trousers: Close fitting tan pants with a pocket on the side of each thigh.  Pocket is approx. 3-4 inches wide has a pointed bottom and a flap with a snap closure. No front or rear pockets. Pants should be the same shade of tan as the shirt, preferably the same fabric. 3. Belt: Tan leather, 2.5 to 3 inches wide.  Large metal buckle, rectangular shaped, with a leather edging. There are six vertical metallic embellishments evenly spaced. 4. Boots: Brown leather or leather like, flat heeled boots. No visible zippers or buckles. Boots should end just below the knee. (Approx 12 inches tall) Narrow strap around right boot holds three metal colored flares. 5. Chest Harness: Leather or leather like straps as shown here (holster and pistol optional). 6. Gloves: Medium to dark brown leather gloves, wrist length, with flared wrist. OPTIONAL ITEM 1. White hair pulled into bun at the upper back of head for General Garza.   COSTUME RESOURCES Rebel Commanders forum   Standard reviewed by the Costume Standards Committee 15 August 2015 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Rebel Captain (Star Wars Miniatures game)

    Rebel Captain (Star Wars Miniatures game)

    CHARACTER DESCRIPTION Star Wars Miniatures is a 34mm scale collectible miniatures tabletop game based on the Star Wars fictional universe that was produced by Wizards of the Coast.  The game was originally released in September 2004 and continued production until May 2010.  Star Wars Miniatures players build point-based squads from one of ten different in-universe factions then conduct battles between those squads. The game mechanics are a simplified version of the d20 roleplaying game system.  Multiple maps, scenarios, and set themes from different settings and time periods from within the Star Wars universe are available.  The Rebel Captain was one of the featured characters of the game. Source Wookieepedia REQUIRED ITEMS 1. Screen accurate Fleet Trooper helmet: a) Helmet may be white or light dove gray. b) Helmet should have a visor, either transparent smoke color or solid black. i) Visor may be fixed in the upper position, or be movable to cover the face. c) A communication box on the left side is required, antennae is optional. 2. Screen accurate Rebel Fleet Trooper Shirt: a) Long-sleeve light blue work shirt with bib in front (blue chambray or blue oxford cloth) i) bib should cover front of shirt with no gaps at the bottom) b) Screen accurate is no cuffs, shirts are accepted with a cuff. c) The bib covers all buttons, including the one at the neck. i) A button down collar is not acceptable. 3. Black leather or leather-like mid-calf, flat or low heeled boots: a) Shaft should be 11-13 inches tall. b) No visible zippers. No straps or buckles are permitted. 4. Khaki/tan pants with solid black stripe on outside of each leg: a) Cargo pants are not permitted. 5. Accurate khaki/tan jacket with brown shoulders (yoke) and four pockets in front. 6. Rank Badge consisting of a square silver background with five raised blue dots. 7. Dark tan or light brown leather or leather like belt (Tandy Canyon tan or range Tan recommended) with silver rectangular or octagonal buckle. Belt should be two to two and half inches wide. No ornamentation.   OPTIONAL ITEM 1. Accurate DH-17 and holster. Holster must match the belt.     COSTUME RESOURCES Rebel Commanders forum Standard reviewed by the Costume Standards Committee 7 July 2015 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Mara Jade (Green dress)

    Mara Jade (Green dress)

    Mara Jade Skywalker was, during different times in her life, an Emperor’s Hand, a smuggler, and later a Jedi Master who sat upon the Jedi High Council. She was raised as a servant to Emperor Palpatine and became a high-level Force-using operative. After Palpatine’s death, she received his last command, which was to kill Luke Skywalker; however, the death of her Master caused her to go rogue. Eventually she joined smuggler chief Talon Karrde, becoming one of his best smugglers and his second-in-command. During the predations of Grand Admiral Thrawn, she was forced to work with Skywalker, and developed a grudging respect for him. During the Galactic Civil War, Mara Jade proved herself skilled in a variety of fields; she was a good pilot and mechanic and trained in the use of both a blaster and hand-to-hand combat even without relying on the Force.

    read more

    A’Sharad Hett (Before/After Order 66)

    A’Sharad Hett (Before/After Order 66)

    Darth Krayt, born A’Sharad Hett, was a Human male who served as a Jedi Master in the waning days of the Galactic Republic.  The son of legendary Jedi Knight Sharad Hett and his wife K’Sheek, both of whom lived among the Tusken Raiders of Tatooine, he eventually became the Padawan of Jedi Masters Ki-Adi-Mundi, and later, An’ya Kuro.

    read more

    Malakili (Rancor Keeper)

    Malakili (Rancor Keeper)

      CHARACTER DESCRIPTION A human male, Malakili was born on Corellia, a planet of the Core Worldsbest known for its pirates, its fast starships, and skilled merchants.  Since his most tender childhood, the young Malakili was fascinated by wild animals, and he wished he could dedicate his life to taking care of them. Source Wookieepedia   REQUIRED ITEMS 1. Hood: a. The hood is made of a dark brown leather or leather-like material, and weathered to look black in places. b. The hood is approximately one square yard, cut to a similar shape as references. c. There is a split / seam on right side of head, used to shape to head. d. There are two long, loose laces hang down from seam. The hood has the appearance of being “stitched” together by hand with black lacing. e. The hood’s edges have a rough appearance. f. There is patchwork of lighter shade leathers on top of head at brow and down left side of head. g. Attached to the hood is 3/4″ to 1″ wide black “choker” around neck. The choker extends up behind the ears and attaches to inside of hood to keep hood in place. h. The hood appears dirty, sweat-stained and greasy. 2. Arm Bands: a. The armbands are 2-1/2″ wide heavy leather or leather-like material straps. They are dark brown in color and appear to be sweat-stained. b. The bands are worn on the biceps (just below the armpit) and wrap completely around the arm with no gaps. c. The edge of straps appear to be worn (either rounded or beveled). d. There is no visible closure. Any overlap used for closure faces to the back, under the arm. e. The armbands have three bronze-looking domes, approximately 2″ on diameter at the base. The domes are not perfect cups, but rather appear to be hand-crafted. Each dome has a “weld” detail around its base, approximately 1/8″ thick. The domes are equally spaced around the strap, on “points” of four, with the fourth space empty under the arm. f. Between each dome is a pair of silver studs. There are eight total. The center of studs are 1/2″ from the edge of the strap. The studs are a half-dome shape and silver, but are dirty and tarnished till almost black. 3. Vambraces/Forearm Guards: a. The arm guards are made from a heavy leather or leather-like material. They are dark brown in color. They appear sweat-stained. b. The center area of forearm has a lighter brown area in the center. c. The armgaurds are extended down to cover half if the back of the hand.The guards do not reach the knuckles. They are extended up to cover approximately 2/3 of the forearm. The guards do not reach the elbow. d. The edges of guards appear to be worn. Either rounded or beveled. e. There are seven studs circle the forearm. The studs are equally spaced and symmetrical. The center of studs are 1/2″ from the edge of the strap. The studs are a half-dome shape and silver, but are dirty and tarnished till almost black. f. There is a 2″ wide leather strap wraps around the wrist, over the top of the guard. g. There are two pairs of studs are on each side of the wrist strap,...

    read more

    Jar Jar Binks (Senatorial Robes)

    Jar Jar Binks (Senatorial Robes)

    CHARACTER DESCRIPTION

    Jar Jar Binks was the first Gungan to represent his people in the Galactic Senate, first serving as a Junior Representative along with Senator Padmé Amidala, and then, after her death, serving as full Senator himself.

    read more

    Marasiah Fel (White Dress)

    Marasiah Fel (White Dress)

    CHARACTER DESCRIPTION

    Marasiah Fel, affectionately known as Sia, was a female Human princess and Imperial Knight who is the daughter of Emperor Roan Fel and Empress Elliah Fel until she became the first Empress of the Fel Empire during the end of the Second Imperial Civil War against the Dark Lord of the Sith Darth Krayt and the One Sith.  Through her father, Princess Fel was a great-granddaughter of Jagged Fel, the first Emperor of the Fel dynasty. She was also a distant cousin of Ania Solo.  Like her father, Fel possessed astrong connection to the Force, thus enabling her to join the Knights of the Empire.  The lover of fellow Imperial Knight Antares Draco, she was captured by the One Sith and taken to Korriban, where Draco nearly died in an attempt to rescue the woman he loved.

    read more

    Mara Jade (as Arica- Blue dancing dress)

    Mara Jade (as Arica- Blue dancing dress)

      CHARACTER DESCRIPTION Arica was the alias used by Mara Jade when she infiltrated Jabba’s Palace in 4 ABY.  Disguised as a dancer, her goal was to get close enough to Luke Skywalker to kill him, as Palpatine had ordered her to. Source Wookieepedia   REQUIRED ITEMS 1. Dress: a. Sleeveless top made of black fishnet material. b. The top has a blue fabric applique sewed onto the chest.  The applique resembles a pair of “wings” with five finger shapes extending from each side of the applique.  In the center of the applique, there is a black stitched circular design with a line going down through the center.  There are also two black stitched triangular designs on the top of each wing. c. Two skirt panels (made of the same blue fabric as the chest applique) that are ankle length.  The skirt panels are front and back, but still connected to each other on the sides.  The pieces of the skirt connected at the sides have decorative belt loops (one at each side. A second belt loop on each side is optional).  The skirt panels must be of a fabric that drapes and flows nicely. 2. Cape: a. The cape is a wide rectangular cape that can be made of the same fabric as the skirt and chest applique, or it may be sheer. b. Two thin, black or silver elastic bands hold the cape to the costumer’s upper arm (one band per arm) and two silver bracelets connect the cape to the costumer’s wrists (one bracelet per wrist). 3. Leggings/stockings: a. The leggings/stockings are black in color. b. They should begin at mid-thigh length and reach the ankles 4. Circlet: a. The circlet is thin and silver. b. Circlet should encircle the forehead. c. The circlet has decorative gems located on each temple. 5. Hair: a. The hair is slightly wavy. b. The hair may reach from the shoulders to mid-back in length.   OPTIONAL ITEMS 1.  Black or silver sandals.  These are recommended (but not required) while trooping to protect the costumer’s feet 2.  A necklace that is just above the neckline of the top and has decorative triangular accents attached to it. 3. Garter belts at the top of each legging/stocking.  The garter belts are black and have decorative silver, oval-shaped designs spaced among the belt.     COSTUME RESOURCES Sewsewing website     Standard reviewed by the Costume Standards Committee 23 March 2015   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    SWTOR Relnex style Jedi Robes

    SWTOR Relnex style Jedi Robes

    CHARACTER DESCRIPTION

    The Jedi Order, later known as the Old Jedi Order and referred to as the Holy Order of the Jedi Knights, was an ancient monastic peacekeeping organization unified by its belief and observance of the Force, specifically the light side.

    read more

    Rebel Junior Officer B (Battle of Yavin)

    Rebel Junior Officer B (Battle of Yavin)

      CHARACTER DESCRIPTION The Junior Rebel Officer wears a khaki jacket and peaked cap.  Unlike the Generals, his jacket lacks rank insignia. Source Wookieepedia   REQUIRED ITEMS 1.  Khaki/tan twill cap with a large bill, and a turned up flap at the back. 2. Light tan scarf worn tucked inside the collar of the shirt. 3. Dark tan/khaki jacket with: a. side closure in front b. Wide, fold down collar with pointed ends c. No visible buttons or fasteners of any kind d. Epaulets on shoulder with a plain silver domed button e. Belt loops on the side with a plain silver domed button f. Two large cargo pockets, below the belt, with a plain, rectangular pocket tab 4. Olive drab canvas (non-nylon) military style belt with metal grommet holes and a metal latch. 5. Dark tan/khaki pants with no visible pockets. Pants and jacket must be made of the same fabric. Pant legs should be long enough to cover the shoelaces. 6. Black, flat soled shoes or boots.     COSTUME RESOURCES Rebel Commanders forum Reference from Rebel Commanders forum   Standard reviewed by the Costume Standards Committee 25 Feb 2015   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Rebel Junior Officer A (Battle of Yavin)

    Rebel Junior Officer A (Battle of Yavin)

      CHARACTER DESCRIPTION The Junior Rebel Officer wears an olive drab jacket and peaked cap.  Unlike the Generals, his jacket lacks rank insignia. Source Wookieepedia   REQUIRED ITEMS 1.  Khaki/tan twill cap with a large bill, and a turned up flap at the back.  2. Olive drab canvas (non-nylon) military style belt with metal grommet holes and a metal latch. 3. Olive drab jacket with: a. Epaulets on the shoulder with black button b. Two upper pockets with a pleat, and accurately shaped flap/tab c. two larger pockets below the belt, flat (no pleat) and accurately shaped flap/tab with button d. Stand up collar e. Plain black buttons above the belt line f. no cuffs on sleeves 4. Olive drab pants with no visible pockets.  Pants and jacket must be made of the same fabric.  Pant legs should be long enough to cover the shoelaces. 5. Black, flat soled shoes or boots.     COSTUME RESOURCES Rebel Commanders forum Reference from Rebel Commanders forum   Standard reviewed by the Costume Standards Committee 25 Feb 2015   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Hera Syndulla

    Hera Syndulla

      CHARACTER DESCRIPTION Hera Syndulla was a Twi’lek female rebel who lived during the reign of the Galactic Empire. A capable pilot, Syndulla was the owner of the VCX-100 light freighter Ghost.  She kept a secret blaster in her boot and was close with Kanan Jarrus, whom she convinced to become a rebel. Source Wookieepedia   REQUIRED ITEMS 1.  Lekku: Accurate light green colour Lekku with detailing visible on the exposed parts of the Lekku. 2. Body Paint: Light green coloured body paint which should match the Lekku colour. 3. Headpiece : Screen-accurate off-white pilot’s headpiece. 4. Goggles: Top piece should consist of a silver frame with tinted lenses on a brown leather or leather like base, these should be either circular or slightly bowed towards the outside of the head.  The goggles should be attached to brown and silver earpieces by silver metal / metallic looking arms, and secured by a brown leather or leather like chinstrap.  The ear pieces should have the detail line on the outer dome. 5. Shirt: Off-white body and sleeves that puff around the lower arm. The shirt collar must have the accurate strap detail.  (A dickie is also acceptable in place of a separate shirt).  6.Vest and Shoulder Pads: Accurate, matching brown leather or leather like material vest and shoulder pads, which should be close in colour to that of the brown parts of the goggles.  Detail lines should be present on the shoulder and chest piece.  Vest should be fitted. 7. Gloves: Large flared dark brown leather or leather-like gauntlet style gloves with wrist strap.  Colour should be clearly darker than the vest and shoulder pads.  Gloves should have 2 detail snaps/rivets present on the outer edge of each side wrist strap. 8. Pants: Gold/light orange flight suit pants with five belt loops.  Pants should end above the waist in the back and rise to the centre of the leather vest in front, where they should appear to be held up by a button or snap, and must also have a leather or leather like detail made of the same material and colour as the vest.  Accurate pockets, knee padding, and fly should be sewn on. Trousers should have cuffed ankles. 9. Leg Strapping and Belt: Light grey leg strapping similar to that of an X-wing pilot on the outside of the legs and pants belt.  Strapping should include the detail pieces similar to a strap adjuster, which should join the strapping that goes around the leg to the strapping pieces that join to the belt.  Pants belt should be made of the same colour material as the leg strapping 10. Boots: Brown leather or leather like boots with low heel, covered by spats in matching colour and material as the vest and shoulder pads.  Boots should have silver/grey foot guards.  Other visible parts of the boots should be plain (e.g. no visible zips, laces, straps, buckles, etc).     OPTIONAL ITEMS 1. Green contact lenses. 2. Accurate Hera pistol and holster on right boot in matching colour material as the boot spats. 3. Accurate communicator on left hand glove strap. COSTUME RESOURCES Star Wars Rebels: The Visual Guide Wookieepedia   Standard reviewed by the Costume Standards Committee 15 Feb 2015   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be...

    read more

    Corran Horn

    Corran Horn

      CHARACTER DESCRIPTION Corran Horn was a Force-sensitive Human male Corellian pilot who served as a Corellian Security Force investigator, a Rogue Squadron ace and New Republic hero, and later a Jedi Master of the New Jedi Order. Source Wookieepedia   REQUIRED ITEMS 1.  Green flightsuit: A medium value, natural green, nothing very saturated: • Code cylinder pocket on outside of upper-middle left arm • Rectangular pocket with a flap closure on upper-middle right arm. Flap should be rectangular shaped • Comm pad pocket on outside of left forearm above wrist • Thigh pockets with rectangular flap closures (upper set required, lower set optional) • No visible zippers or snaps • Mandarin-style collar with pointed tab closure. Collar closes from left to right with the exposed tab on the right side of the throat • Cuffs should close in a similar fashion as the Mandarin-style collar 2. Mid-calf black boots (Jack boots or engineer boots are acceptable): • Leather pull-on style preferred with low heels • Boots should be largely unadorned. No laces or ankle buckles (small buckle at top edge of boot allowable if covered by blousing) • No non-black zippers. Any zipper closure must either be hidden or on the inside of the boot (that is, front and outside zippers are not permitted) • High-Calf boots are acceptable with sufficient blousing of the flightsuit legs 3. Silver/grey leg flares in an olive drab or black leg-band holder: • Maximum of 8 flares per holder • Flares and flare holder should be approximately 4″ (inches) long • Metal leg flares are preferred, but other materials are permitted as long as, when finished, give the appearance of being silver metallic in appearance • Leg flares should be spaced equidistant around the leg • Leg flares should be worn on the left leg and should be positioned to so the bottom edge of the leg flare is resting on the top of the boot (that is, no gap between the flare holder and the top of the boot) 4. Light grey/silver grey ejection harness and web belt: • Harness and belt are made of strapping material that is 2″ (inches) wide • Front and back straps extend up the torso under the flack vest and are secured to either the flightsuit or to the inside the flak vest panels.  Attachment must be hidden by the flak vest.  The lower part of the harness should fall (or loop) just below the inseam (or crotch area) • Two loops of strapping are connected to the front-back strapping (at the lowest part of the front-back loop) and loop around each leg, drooping no lower than the knees • The belt is worn over the front/back harness strap and is closed with a silver/gray “cargo slide” (or roll pin) style buckle.  The free end of the belt is looped around the slide so that the excess belt is on the underneath/inside of the belt, not on top/outside of the belt.  The right side of the belt contains 6 (six) vertical loops for mini-flares.  Mini-flares are made of metal or other materials that, when finished, have a metallic silver appearance.  A mix of filled and empty slots is acceptable. 5. Flak Vest, consists of white front and back cloth (ballistic nylon or similar fabric) panels, contoured to fit...

    read more

    Satele Shan

    Satele Shan

    CHARACTER DESCRIPTION

    Satele Shan was a human female who served as the Jedi Order’s Grand Master during the Cold War and the Galactic War between the Galactic Republic and the Sith Empire.  The daughter of Jedi Knight Tasiele Shan, who was herself a descendant of the legendary Jedi Knights Revan and Bastila Shan, Satele was born on the planet Brentaal IV in the year 3699 BBY.  Inheriting her family’s Force-sensitivity, she was inducted into the Jedi Order and became the Padawan of Jedi Master Ngani Zho, though she later traveled to the Sith homeworld of Korriban to study under the Zabrak Battlemaster Kao Cen Darach.

    read more

    Rebel Officers (Battle of Yavin)

    Rebel Officers (Battle of Yavin)

      CHARACTER DESCRIPTION The Rebel Officer wears the brown shirt and pale jacket of a Starfighter Command officer.  Unlike the Generals, his jacket lacks rank insignia or brown shoulder epaulettes. Source Wookieepedia   REQUIRED ITEMS 1.  Accurate khaki/tan jacket with brown shoulders (yoke) and four pockets in front.  2. Dark brown shirt with bib in front, no visible buttons. 3. Khaki/tan pants with solid dark brown or black stripe on side of each leg or olive green pants. 4. Brown belt 1 ¾ to 2 inches wide with oval buckle. 5. Brown, flat soled, tall boots (14-16 inch tall shaft), riding boots recommended, or black boots/shoes with olive drab gaiters or puttees. Heels must be no higher than 1 inch. No obviously visible zippers, buckles, or laces. 6. Natural/cream colored duster with lapels, mid-calf to ankle length, no buttons. 7. Rank badge: 5 blue pips or 4 red with 1 centrally located blue pip.     COSTUME RESOURCES Rebel Commanders forum   Standard reviewed by the Costume Standards Committee 2 Feb 2015   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    General Jan Dodonna

    General Jan Dodonna

      CHARACTER DESCRIPTION Jan Dodonna was one of the first Generals in the Rebellion’s military.   He was one of the first captains of a Star Destroyer in the days of the Galactic Republic, having served in both the Stark Hyperspace War and the Clone Wars.  With plans brought to him by Princess Leia Organa which were downloaded from R2-D2, Dodonna helped plan the attack on the Death Star. Source Wookieepedia   REQUIRED ITEMS 1.  Accurate khaki/tan jacket with brown shoulders (yoke) and four pockets in front.  2. Dark brown shirt with bib in front, no visible buttons. 3. Khaki/tan pants with solid dark brown or black stripe on side of each leg. 4. Brown belt 1 ¾ to 2 inches wide with oval buckle. 5. Brown, flat soled, tall boots (14-16 inch tall shaft), riding boots recommended. Heels must be no higher than 1 inch. No obviously visible zippers, buckles, or laces. 6.Natural/cream colored duster with lapels, mid-calf to ankle length, no buttons. (Slash pocket is optional) 7. Rank badge, 5 red pips 8. Gray/white hair, beard and mustache; appropriately styled.  Prosthetics may be used   OPTIONAL ITEMS 1. Pointer 2. Hero medals   COSTUME RESOURCES Rebel Commanders forum   Standard reviewed by the Costume Standards Committee 2 Feb 2015   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Lobot

    Lobot

      CHARACTER DESCRIPTION Lobot was a Human male who served as the chief administrative aide to Baron Administrator Lando Calrissian on Cloud City over the planet Bespin.  His brain was connected to the city’s central computer which allowed him to communicate directly with the city’s computer network.  In this capacity, he served as the city’s first and only computer-liaison officer. Source Wookieepedia   REQUIRED ITEMS 1. Tunic a. Cream colored undershirt with wide billowy sleeves and cuff at the wrist and stand-up square collar. 2. Vest a. Gray in color (to match references) b. Has a Y-shaped bib section and two pocket flaps. Top stitching is visible near side boarder of bib and side and bottom of pocket flaps. c. Back of vest has parallel pleats at side that goes up and over the shoulder and ends at the pocket flaps near the arm pit. (Similar to shoulder tucks on the Jedi outer tunic, but extends all the way down the back of the vest.) d. Vest may be attached to the pants in a jumpsuit fashion if desired 3. Pants a. Full-length pants in the same color of the vest b. No pockets. 4. Belt a. The belt is black in color, featuring 2 layer construction.  The bottom layer should be of a thin leather like material that wraps around the costumer.  The top layer should be thicker and covered in a leather or leather like material. b. The belt has a wide portion that wraps from the costumer’s right hip to left hip.  The back of the belt is narrow, about 3 inches wide. c. The top layer of the belt contains a rectangular opening in the middle of the front portion to display the greeblies. This thick portion wraps from the costumer’s right hip to left hip. d. Greeblies include in the opening of the belt’s top layer include: 2 large silver discs 2 large black discs with a + configuration on the surface 2 Small black rectangles with silver borders 2 sets of 2 small silver rectangles A single silver rectangle  The bottom portion of a snap e. Connecting the vest and pants is a single small black belt loop piece centered on the back of the vest and pants.  The back of the belt should sit underneath this belt loop. 5. Headpiece a. Accurately shaped headpiece that is gray in color. b. There is a layer of light gray felt-like material over the top rim of the headpiece. c. LEDs can be either functional or not. d. The headpiece is symmetrical. Each of the two sides of the headpiece has the following: -Four red tinted rectangular LEDs in a recessed side panel. Side panel is painted dark blue, that appears black. Black paint is also acceptable. -One red tinted LED in a recessed circle at side of the cheeks. -A row of white LEDs facing backwards under a clear plastic shield, no more than nine LEDs -Two non functioning red tinted LEDs with black o-rings at the base on the back panel. -Four small red tinted LEDs on the front panel. -Accurately placed reflective tape. *Costumer must be bald.  A bald cap can be used to achieve the look. 6. Boots a. The boots are Chelsea style – ankle boots in a gray, closely matching...

    read more

    Obi Wan Kenobi (Mandalorian Super Commando Armour)

    Obi Wan Kenobi (Mandalorian Super Commando Armour)

    CHARACTER DESCRIPTION

    Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter.  His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area.  It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life.

    read more

    Kanan Jarrus

    Kanan Jarrus

    CHARACTER DESCRIPTION

    Kanan Jarrus, born Caleb Dume, was a Human male Jedi Padawan who survived Order 66.  Going into hiding, he forsook the Jedi ways for sometime, swapping his blue-bladed lightsaber for a blaster. Eventually, he would come to command the VCX-100 light freighter Ghost several years before the Battle of Yavin.  While cocky and often sarcastic, Jarrus was eager to help out and fight the Galactic Empire.  Five years before the Battle of Yavin, Jarrus met Ezra Bridger, a fourteen-year-old Force-sensitive Human, whom he decided to mentor.

    read more

    Cloud City Wing Guard

    Cloud City Wing Guard

          CHARACTER DESCRIPTION The Bespin Wing Guard, informally known as the Bespin Security Guard, Cloud City Wing Guard, or Cloud Police, whose members sometimes were called Bespin cops, was the primary security force of Cloud City on Bespin. Source: Wookieepedia   REQUIRED ITEMS 1. Undershirt a. Shirt is a cream-colored turtleneck made of jersey material b. Only the turtleneck collar of the undershirt is exposed. 2. Jacket a. The jacket is blue in color and made of a matte material b. The jacket closes in the center using Velcro for the closure c. Trim on jacket is very thin almost flat gold piping. Piping goes around the neck down both sides of the jacket and around the back about 1″ inside the jacket edge. There is an additional looped design out of the same trim on the front lower corner of both sides of the jacket d. Jacket has a 3 inch high dart in the center of each side front at the bottom e. The sleeves of the jacket have red cuffs on the forearms that are pointed to a triangular shape on the outer side of the sleeve f. The top triangular points of the red cuffs are trimmed in black g. Jacket is collarless h. Jacket bottom is below the waistline and covers the waistline of the pants.   NOTE: The Jacket, Pants, and Helmet are a dark blue (not navy) in color and should match as closely as possible.  Since the Helmet is a suede like material it might be easier to purchase cream, white or ivory fabrics and then dye them so they all look the same. 3. Pants a. The pants are made of the same blue material as the jacket b. The pants are tucked into the boots c. Pants may close in front with standard fly stitching 4. Boots a. The boots are made of leather or leather-like material. No rubber boots allowed b. Boots come to just below the knee and are black leather. (No suede or vinyl or rubber boots) c. It is preferred that the boots have a visible full-length inside zipper with either a brass or gold colored regular zipper pull – however pull on boots will be permitted or smaller inside zippers. No laces or buckles allowed.   5. Helmet  a. Accurately shaped helmet based on the Ottoman Turkish Kabulak but worn backwards to create the very short visor effect. Material of hat should have a suede like appearance and match the jacket and pants in color. The helmet design is made from 2 belts. Each belt is made of a right and left side. The right and left sides overlap on the top belt in the opposite direction as the bottom belt. The bottom belt sits on top of the upper belt. b. Belts have a dark blue trim on the edges which are visible and make the design of the hat.   OPTIONAL ITEMS 1. Relby K-23 Blaster Pistol in accurately shaped black plastic holster.  Holster may be worn on the right or left hip.   COSTUME RESOURCES 1. Rebel Supporters Forum     Reviewed on 22nd January 2015   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be...

    read more

    Mon Mothma (Episode VI)

    Mon Mothma (Episode VI)

    CHARACTER DESCRIPTION

    Mon Mothma a native of Chandrila, was a female Human who served as an important political figure from the waning days of the Galactic Republic, one of the founders of the Alliance to Restore the Republic, and the first Chief of State of the New Republic.

    read more

    Sabine Wren

    Sabine Wren

    CHARACTER DESCRIPTION Sabine Wren was a Mandalorian Human female weapons expert who was active during the reign of Galactic Emperor Sheev Palpatine around five years before the Battle of Yavin. She was also a graffiti artist who customized her armor and tagged a new symbol every time the crew of the Ghost struck Imperial targets. Source: Wookieepedia REQUIRED ITEMS 1. Flight suit shirt should be a stretch material two-piece garment with the top being black with gray panels. Top must have short sleeves and a high collar that splits in the front. 2. Pants should be khaki with light brown panels and long enough to tuck into the boots. 3. Boots must be high enough to stop just below the knee, made of black leather or leather-like material, and fit snug to the wearer. Wedge heel preferred. Must be weathered and paint splattered to match references. 4. Chest Armor should consist of collar armor, right and left chest plates, and center diamond. Should be at least 3mm thick. Chest plates and collar plates should be painted fuchsia/maroon, center diamond should be red. Left chest plate must feature an orange stylized rebel design to match references. Right chest plate must must feature two diagonal stripes painted to match references. All plates must be painted and weathered to match references both in color and weathering pattern. All armor must attach securely to the top with proper spacing. 5. Shoulder Armor must be at least 3mm thick. Must have four points and must curve around the upper arm and shoulder. Right shoulder must be white or light grey with a faded checker pattern. Left shoulder must be mottled orange with a stylized hound illustration in faded fuchsia/maroon. Must be painted and weathered to match references both in color and weathering pattern. 6. Knee Armor must be at least 3mm thick and painted fuchsia/maroon. Right knee must feature a vertical white stripe. Must be painted to match references in both color and weathering pattern. Should have the appearance of being attached by black straps wide enough to cover the knees. 7. Elbow Armor must at least 3mm thick and painted fuchsia/maroon. There should be two plates that appear to connect when the arm is straightened and separate when the arm is bent. Plates should be attached to a black band around the elbow. Must be painted and weathered to match references. 8. Boot Armor must be at least 3mm thick and painted fuchsia/maroon. Armor should be weathered and paint splattered to match references. 9. Gloves must be black leather or leather-like material. Must extend to a few inches below the elbow and be flared “gauntlet” style similar to X-Wing pilot gloves. Gloves should be weathered and paint splattered to match references. 10. Holster Belt must be a medium brown leather or leather like material that secures via metal rectangular buckle in front. Must feature 2 drop holsters with an angular design. Must have two metallic loops on either side of the belt buckle with the holster connecting between the buckle and the loop. Must feature two horizontal metallic loops where the holster connects to the belt in the back. 11. Holsters should hold 2 Westar-35 pistols similar to the ones seen in TCW. Must be a mismatched pair with one being painted blue,...

    read more

    Generic KOTOR I Jedi

    Generic KOTOR I Jedi

    CHARACTER DESCRIPTION

    KOTOR I Generic Jedi Generic Jedi Knights Of The Old Republic from the computer game.

    read more

    Beru Lars (Episode IV)

    Beru Lars (Episode IV)

      CHARACTER DESCRIPTION Beru Whitesun Lars, the wife of Owen Lars, was a Tatooinian woman who raised Luke Skywalker after the fall of the Galactic Republic. Coming from a long line of moisture farmers, Beru Whitesun grew up near Mos Eisley on Tatooine. On a trip to Anchorhead, she met Owen Lars, the son of another moisture farmer, Cliegg Lars. Beru and Owen fell in love, and Beru later became part of the Lars family. Source: Wookieepedia REQUIRED ITEMS 1. Jumper a. Dark Brown long sleeve v-neck pull over jumper b. V- neck and sleeve hems are topstitched with matching brown thread c. Jumper has a seam at the waist and is no more than 2” above the floor in length d.Skirt part of jumper is A-line with a very slight gather at the waist e.Sleeves should come to the wrist of wearer 2. Undershirt a. The undershirt is a pumpkin or rusty orange colored v-neck undershirt or dickey b. The undershirt has a pattern of small “winged basket” designs that are dark brown in color. See reference images for this pattern c. The undershirt does not need sleeves d. Fabric should be a loose weave if possible e. No buttons should be showing and collar should reach the shoulders of Denim jacket f. Collar is not top-stitched 3. Jacket a. Medium Blue Wash Denim Jacket b. Straight Denim Jacket with pockets has no shoulder seams but has two angled seams in the back instead. These seams are covered with a ¾” wide strip of matching fabric to hide the seam line. This strip goes under the neck trim in the back c. Jacket does not have a collar d. Jacket has a matching trim that goes down the front edges of the jacket and around the neck in back. The trim is narrow in back and very wide in front. Some of the trim on the back should show below the back of the orange collar when worn e. Deep front Pockets are placed to cover at least 1” of the trim f. Trim, hem, and pockets are top-stitched g. Closures are made from 3 pairs of six loops of denim fabric. First pair is placed at the corner of the V at the top. Remaining two loops are spaced evenly down the front of the jacket. Loops should interlace by threading one loop through the other and then over the unattached ends h. Sleeves are about 2-3” above the wrist which allows the brown jumper sleeve to show at all times. Sleeves have a wide cuff at least as wide as the trim in front and are top-stitched. The inside of the sleeve is lined at least halfway up the inside so that the darker side shows on the inside of the cuff when arm is extended. 4. Boots and Socks a. Black or Dark Brown ankle length boots with laces. Hiking boots are ok if solid in color b. Matching socks should be worn and show just above the boot. 5. Hair a. Hair should be worn no longer than shoulder length and should have full side swept bang b. A bob like style is preferred but not absolute c. Naturally-occurring hair colors only OPTIONAL ITEMS 1. Tupperware 640-7 cup for “Blue Milk” 2. Pockets may...

    read more

    Luke Skywalker (Jedi Academy Robes)

    Luke Skywalker (Jedi Academy Robes)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Death Star Duel)

    Luke Skywalker (Death Star Duel)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Endor Strike Team)

    Luke Skywalker (Endor Strike Team)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Jabba’s Palace / Sarlaac Pit)

    Luke Skywalker (Jabba’s Palace / Sarlaac Pit)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Bespin Fatigues)

    Luke Skywalker (Bespin Fatigues)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Dagobah Training Fatigues)

    Luke Skywalker (Dagobah Training Fatigues)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Snowspeeder / X-Wing)

    Luke Skywalker (Snowspeeder / X-Wing)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Taun-Taun Hoth Gear)

    Luke Skywalker (Taun-Taun Hoth Gear)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Yavin 4 Ceremonial)

    Luke Skywalker (Yavin 4 Ceremonial)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (X-Wing Pilot)

    Luke Skywalker (X-Wing Pilot)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Post-Trash Compactor)

    Luke Skywalker (Post-Trash Compactor)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Lars Homestead / Tatooine)

    Luke Skywalker (Lars Homestead / Tatooine)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Mara Jade (Black Jumpsuit)

    Mara Jade (Black Jumpsuit)

    Mara Jade Skywalker was, during different times in her life, an Emperor’s Hand, a smuggler, and later a Jedi Master who sat upon the Jedi High Council.

    read more

    Anakin Skywalker (Episode III)

    Anakin Skywalker (Episode III)

    CHARACTER DESCRIPTION

    Anakin Skywalker – was a Force-sensitive Human male who served the Galactic Republic as a Jedi Knight and later served the Galactic Empire as the Sith Lord Darth Vader. Born to the slave Shmi Skywalker in 41.9 BBY, Anakin was conceived by midi-chlorians, the symbiotic organisms that allowed individuals to touch the Force, and he and his mother were brought to the desert planet of Tatooine to be the slaves of Gardulla the Hutt.

    read more

    Anakin Skywalker (Jedi Padawan)

    Anakin Skywalker (Jedi Padawan)

    CHARACTER DESCRIPTION

    Anakin Skywalker – was a Force-sensitive Human male who served the Galactic Republic as a Jedi Knight and later served the Galactic Empire as the Sith Lord Darth Vader. Born to the slave Shmi Skywalker in 41.9 BBY, Anakin was conceived by midi-chlorians, the symbiotic organisms that allowed individuals to touch the Force, and he and his mother were brought to the desert planet of Tatooine to be the slaves of Gardulla the Hutt.

    read more

    Anakin Skywalker (Outlander Peasant Disguise)

    Anakin Skywalker (Outlander Peasant Disguise)

    CHARACTER DESCRIPTIONS

    Anakin Skywalker – was a Force-sensitive Human male who served the Galactic Republic as a Jedi Knight and later served the Galactic Empire as the Sith Lord Darth Vader. Born to the slave Shmi Skywalker in 41.9 BBY, Anakin was conceived by midi-chlorians, the symbiotic organisms that allowed individuals to touch the Force, and he and his mother were brought to the desert planet of Tatooine to be the slaves of Gardulla the Hutt.

    read more

    Anakin Skywalker (Clone Wars Microseries)

    Anakin Skywalker (Clone Wars Microseries)

    CHARACTER DESCRIPTIONS

    Anakin Skywalker – was a Force-sensitive Human male who served the Galactic Republic as a Jedi Knight and later served the Galactic Empire as the Sith Lord Darth Vader. Born to the slave Shmi Skywalker in 41.9 BBY, Anakin was conceived by midi-chlorians, the symbiotic organisms that allowed individuals to touch the Force, and he and his mother were brought to the desert planet of Tatooine to be the slaves of Gardulla the Hutt.

    read more

    Anakin Skywalker (Endor Ghost)

    Anakin Skywalker (Endor Ghost)

    CHARACTER DESCRIPTIONS

    Anakin Skywalker – was a Force-sensitive Human male who served the Galactic Republic as a Jedi Knight and later served the Galactic Empire as the Sith Lord Darth Vader. Born to the slave Shmi Skywalker in 41.9 BBY, Anakin was conceived by midi-chlorians, the symbiotic organisms that allowed individuals to touch the Force, and he and his mother were brought to the desert planet of Tatooine to be the slaves of Gardulla the Hutt.

    read more

    Obi-Wan Kenobi (The Clone Wars season I)

    Obi-Wan Kenobi (The Clone Wars season I)

    CHARACTER DESCRIPTION

    Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter. His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area. It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life.

    read more

    Barriss Offee (The Clone Wars)

    Barriss Offee (The Clone Wars)

    Barriss Offee was a Mirialan Jedi Knight and General during the Clone Wars. A skilled Jedi Healer, Offee utilized her abilities at a Rimsoo on Drongar during the galactic conflict.

    read more

    Generic Jedi General (The Clone Wars)

    Generic Jedi General (The Clone Wars)

    CHARACTER DESCRIPTION

    Jedi – A Jedi was a member of the Jedi Order, who studied, served and used the mystical energies of the Force; usually, the light side of the Force. The weapon of the Jedi was the lightsaber, a weapon with a blade made of pure energy. The Jedi fought for peace and justice in the Galactic Republic, usually against their mortal enemies, the Sith and Dark Jedi, who studied the dark side of the Force. Although the Order was almost destroyed five times, including once by the Sith Empire of Darth Revan, by the Sith Triumvirate under Darth Nihilus during the First Jedi Purge shortly after, 4,000 years after that, by the Great Jedi Purge of Darth Sidious, and a century afterwords by Darth Krayt’s Galactic Empire and it’s Third Jedi Purge, the order continued to live on, in part due to the Skywalker family who time and time again played important parts in the history of the Jedi.

    read more

    Luminara Unduli (The Clone Wars)

    Luminara Unduli (The Clone Wars)

    CHARACTER DESCRIPTION

    Luminara Unduli – was a female Mirialan who served as a Jedi Master and Jedi General in the fading years of the Galactic Republic. She was a valued adviser to the Jedi High Council, the Supreme Chancellor, and the Galactic Senate. During the Clone Wars, she fought with her last Padawan, Barriss Offee, and she was a common and formidable presence at points of crisis, on worlds such as Ilum, Nadiem, and Geonosis. She was killed during the Battle of Kashyyyk when Contingency Order 66 was enacted.

    read more

    Ahsoka Tano

    Ahsoka Tano

    CHARACTER DESCRIPTION

    Ahsoka Tano, nicknamed Snips by her master, was a Togruta female from the planet Shili who trained as a Jedi apprentice during the Clone Wars, the conflict between the Galactic Republic and the Confederacy of Independent Systems. Tano was assigned to Jedi Knight Anakin Skywalker by Jedi Grand Master Yoda, and she demonstrated an eagerness to prove herself worthy to be his apprentice. Tano was involved in the defeat of the Separatist army on the planet Christophsis and was important to Republic efforts during the Battle of Teth. Along with Skywalker, Tano was instrumental in acquiring the Republic’s safe passage through Hutt Space, due to her part in rescuing the son of Jabba the Hutt, which ensured an alliance between the Republic and the Hutt clans.

    read more

    Anakin Skywalker (The Clone Wars)

    Anakin Skywalker (The Clone Wars)

    CHARACTER DESCRIPTION:

    Anakin Skywalker – was a Force-sensitive Human male who served the Galactic Republic as a Jedi Knight and later served the Galactic Empire as the Sith Lord Darth Vader. Born to the slave Shmi Skywalker in 41.9 BBY, Anakin was conceived by midi-chlorians, the symbiotic organisms that allowed individuals to touch the Force, and he and his mother were brought to the desert planet of Tatooine to be the slaves of Gardulla the Hutt.

    read more

    Galen Marek – Ceremonial Jedi Robes

    Galen Marek – Ceremonial Jedi Robes

    CHARACTER DESCRIPTION

    Galen Marek, codenamed Starkiller, was a male Human apprentice of the Sith Lord Darth Vader. A powerful Force-user who lived during the era of the Galactic Empire, Marek originated from the Wookiee home planet of Kashyyyk as the sole offspring of two Jedi Knights—Mallie and Kento Marek—who deserted the Jedi Order during the Clone Wars. Following the death of his mother, the young Marek’s father was killed in battle by Darth Vader. Though only a child, Marek possessed an exceptionally strong connection to the Force that the Dark Lord of the Sith sought to exploit.

    read more

    Galen Marek – Arena Standard, FU II

    Galen Marek – Arena Standard, FU II

    CHARACTER DESCRIPTION

    Galen Marek, codenamed Starkiller, was a male Human apprentice of the Sith Lord Darth Vader. A powerful Force-user who lived during the era of the Galactic Empire, Marek originated from the Wookiee home planet of Kashyyyk as the sole offspring of two Jedi Knights—Mallie and Kento Marek—who deserted the Jedi Order during the Clone Wars. Following the death of his mother, the young Marek’s father was killed in battle by Darth Vader. Though only a child, Marek possessed an exceptionally strong connection to the Force that the Dark Lord of the Sith sought to exploit.

    read more

    Galen Marek (Death Star Duel)

    Galen Marek (Death Star Duel)

    CHARACTER DESCRIPTION

    Galen Marek, codenamed Starkiller, was a male Human apprentice of the Sith Lord Darth Vader. A powerful Force-user who lived during the era of the Galactic Empire, Marek originated from the Wookiee home planet of Kashyyyk as the sole offspring of two Jedi Knights—Mallie and Kento Marek—who deserted the Jedi Order during the Clone Wars. Following the death of his mother, the young Marek’s father was killed in battle by Darth Vader. Though only a child, Marek possessed an exceptionally strong connection to the Force that the Dark Lord of the Sith sought to exploit.

    read more

    Rahm Kota – TIE Factory (Jedi)

    Rahm Kota – TIE Factory (Jedi)

    CHARACTER DESCRIPTION

    Rahm Kota was a Human male who served as a Jedi Master and General during the Clone Wars. Born on a war-torn world, Kota fought in the trenches during the planet’s internal conflicts from the age of ten. At the age of eighteen, Kota met the Jedi Mace Windu, who had been dispatched to the planet to end the conflict peacefully. Discovering Kota’s Force-sensitivity, Windu took Kota back to the Jedi Temple on Coruscant to be trained as a Jedi. Despite being well over the traditional age of acceptance, Kota was schooled in the Force by Master Yoda. He took Falon Grey as his Padawan sometime before the Clone Wars, training him to Knighthood. During the Clone Wars, Kota was made a general in the Grand Army of the Republic. He did not believe that clone troopers were fit for battle, however, and refused to lead them. Instead, he commanded his own militia, comprised of volunteers.

    read more

    Juno Eclipse (Rebel Supporter)

    Juno Eclipse (Rebel Supporter)

    CHARACTER DESCRIPTION Juno Eclipse was a Human female who served the Galactic Empire as an Imperial officer and pilot during the Great Jedi Purge. Her exceptional skills in leadership and combat were noticed by several high-ranking officials in the Imperial Military, including the Sith Lord Darth Vader. Rising through ranks in record time, Captain Eclipse was personally chosen by Vader to lead his Black Eight Squadron. Although she initially considered service under Emperor Palpatine’s right-hand man to be the highlight of her career, her role in the Bombing of Callos caused her to doubt some of the Empire’s policies.  (Source: Wookiepedia) REQUIRED ITEMS 1.  Plain tapered/fitted black jacket  waist length (at waist or slightly below waist length (comes to where the belt covers it) No buttons or zippers No Imperial rank bars or tools  2. Imperial belt Only imperial item allowed. Its rectangular in shape 3. Light to medium solid grey tank top underneath black jacket 4. Plain tapered/fitted black pants, no belt loops 5. Black leather fitted gloves Wrist length. Strap at the wrist, an opening between wrist and where the fingers begin 6. Long black riding boots  Should be just underneath the knee in length 7. Hair must be pulled back, in a french twist type of fashion with a couple of stray hairs hanging towards the face-line COSTUME REFERENCES Hairstyle: http://www.forum.rebellegion.com/images/CostumeHair/FUJuno/juno2.jpg Outfit: http://www.forum.rebellegion.com/images/CostumeHair/FUJuno/juno3.jpg http://www.forum.rebellegion.com/images/CostumeHair/FUJuno/juno4.jpg PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Obi-Wan “Ben” Kenobi

    Obi-Wan “Ben” Kenobi

    CHARACTER DESCRIPTION

    Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter. His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area. It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life.

    read more

    Obi-Wan Kenobi (Episode III)

    Obi-Wan Kenobi (Episode III)

    CHARACTER DESCRIPTION

    Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter. His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area. It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life.

    read more

    Obi-Wan (Episode II)

    Obi-Wan (Episode II)

    CHARACTER DESCRIPTION

    Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter. His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area. It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life.

    read more

    Obi-Wan Kenobi (Episode I)

    Obi-Wan Kenobi (Episode I)

    CHARACTER DESCRIPTION

    Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter. His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area. It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life.

    read more

    Obi-Wan Kenobi (Clone Wars V2, General)

    Obi-Wan Kenobi (Clone Wars V2, General)

    CHARACTER DESCRIPTION

    Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter. His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area. It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life.

    read more

    Obi-Wan Kenobi (Clone Wars V1, General)

    Obi-Wan Kenobi (Clone Wars V1, General)

    CHARACTER DESCRIPTION

    Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter. His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area. It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life.

    read more

    Visas Marr (Unseen, Unheard)

    Visas Marr (Unseen, Unheard)

    CHARACTER DESCRIPTION

    Visas Marr was a Miraluka female from the Mid Rim world of Katarr who lived during the time of the Jedi Civil War and the period of unrest that followed in its wake. In 3952 BBY, Katarr had been chosen to host a secret Jedi conclave, which consequently drew the attention of the Sith.

    read more

    Visas Marr (KOTOR 2: The Sith Lords)

    Visas Marr (KOTOR 2: The Sith Lords)

    CHARACTER DESCRIPTION

    Visas Marr was a Miraluka female from the Mid Rim world of Katarr who lived during the time of the Jedi Civil War and the period of unrest that followed in its wake. In 3952 BBY, Katarr had been chosen to host a secret Jedi conclave, which consequently drew the attention of the Sith.

    read more

    Bultar Swan

    Bultar Swan

    CHARACTER DESCRIPTION

    Bultar Swan was a female Human who trained with and served the Jedi Order during the final decades of the Galactic Republic. As a Padawan of Jedi Master Micah Giiett, Swan excelled at martial arts, and she later complemented her fighting techniques with a strong lightsaber defense under the tutelage of Jedi Master Plo Koon. Dedicated to her beliefs, she was respected within the Order for her record of never having killed an opponent prior to the outbreak of the Clone Wars. After becoming a Jedi Knight, Swan was routinely sent on peace missions, including one to the Fondor system to investigate the alleged reappearance of an ancient starship and to mediate a dispute over salvage rights to the vessel. Swan became entwined in a plot by the shipbuilder Groodo the Hutt to destroy the Fondor Shipyards, and she aided in destroying Groodo’s Droid Control Army and thwarting his plan to take over Fondor Spaceport.

    read more

    Aayla Secura

    Aayla Secura

    CHARACTER DESCRIPTION

    Aayla Secura, born Aaylas’ecura, was a female Rutian Twi’lek Jedi Master in the later days of the Republic, who served with distinction as a General during the Clone Wars. She served as a Padawan under the tutelage of Quinlan Vos, and later, Vos’ own master Tholme. Both Secura and Vos survived a brush with the dark side early in their Jedi training, though she later proved herself worthy of knighthood.

    read more

    Qui-Gon Jinn

    Qui-Gon Jinn

    CHARACTER DESCRIPTION

    Qui-Gon Jinn was a revered, yet maverick and unconventional Human male Jedi Master. He was the Padawan to Count Dooku, and the mentor to Obi-Wan Kenobi and briefly Anakin Skywalker. Jinn often placed himself in conflict with the Jedi High Council. He was deeply attuned to the Living Force, which contributed to him frequently taking side trips to help seemingly weak and useless life-forms. Despite his opposition to the council, he was regarded by many Jedi as sharp-witted and possessing great wisdom.

    read more

    The Old Republic Armored Jedi

    The Old Republic Armored Jedi

    CHARACTER DESCRIPTION
    A Jedi was a member of the Jedi Order, who studied, served and used the mystical energies of the Force; usually, the light side of the Force. The weapon of the Jedi was the lightsaber, a weapon with a blade made of pure energy. The Jedi fought for peace and justice in the Galactic Republic, usually against their mortal enemies, the Sith and Dark Jedi, who studied the dark side of the Force.

    read more

    Quinlan Vos (Comic Book)

    Quinlan Vos (Comic Book)

    CHARACTER DESCRIPTION
    Quinlan Vos was a male Kiffar Jedi Master in the Jedi Order and a General in the Grand Army of the Republic during the Clone Wars against the Confederacy of Independent Systems. He hailed from the planet Kiffu in the Inner Rim. With long, dreadlocked hair and a band of pale yellow across his upper face, Vos was gifted with psychometric powers which allowed him to “read memories” from inanimate objects through physical contact.

    read more

    Bastila Shan (Knights of the Old Republic)

    Bastila Shan (Knights of the Old Republic)

    Bastila Shan was a Human female who served as a Jedi Padawan during the Jedi Civil War. Born on the planet Talravin to Helena Shan and a treasure hunter, her mother gave her up to the Jedi Order, believing that their lifestyle of travel and exertions was not suitable for her daughter. Shan was found to have an exceptional gift with a Force power known as battle meditation; which increased her allies’ morale while demoralizing her enemies.

    read more

    Luminara Unduli

    Luminara Unduli

    Luminara Unduli was a female Mirialan who served as a Jedi Master and Jedi General in the fading years of the Galactic Republic. She was a valued adviser to the Jedi High Council, the Supreme Chancellor, and the Galactic Senate. During the Clone Wars, she fought with her last Padawan, Barriss Offee, and she was a common and formidable presence at points of crisis, on worlds such as Ilum, Nadiem, and Geonosis. She was killed during the Battle of Kashyyyk when Contingency Order 66 was enacted.

    read more

    Shaak Ti

    Shaak Ti

    Shaak Ti was a female Togruta Jedi Master, hailing from the planet Shili, serving the Galactic Republic as a member of the Jedi Order in the final decades of the Republic Classic era. Joining the Jedi High Council in the years before the Clone Wars, she took up the ranks of General within the Grand Army of the Republic and was tasked with the oversight of clone trooper training on the ocean world Kamino.

    read more

    Cin Drallig (Episode III)

    Cin Drallig (Episode III)

    CHARACTER DESCRIPTION

    Cin Drallig was a legendary Human male Jedi Master of the Jedi Order who served as battlemaster and head of security at the Coruscant Jedi Temple during the waning days of the Galactic Republic. He met his doom at the hands of Darth Vader during Operation: Knightfall, when the Order 66 go-ahead was given.

    read more

    Atris

    Atris

    CHARACTER DESCRIPTION

    Atris was a Human female who served as a Jedi historian, and later as a Jedi Master and Jedi Council member during the Mandalorian Wars and the Jedi Civil War. She was deeply committed to the Order and was a fierce adherent of the Jedi Code.

    read more

    Depa Billaba

    Depa Billaba

    Depa Billaba was a female Chalactan Jedi Master serving the Jedi Order during the final years of the Republic Classic era. Trained by Master of the Order Mace Windu and appointed to the Jedi High Council, Billaba was considered one of the most enlightened Jedi of her time and had earned her seat on the High Council. Having mastered the difficult Vaapad lightsaber form created by Mace Windu, she became one of its few practitioners and one of only three masters of the form.

    read more

    Jocasta Nu

    Jocasta Nu

    Jocasta Nu was a female Human who served as the Chief Librarian of the Jedi Archives during the final days of the Galactic Republic, with a penchant for being a bit overconfident in the completeness of her Archives.   During her career, Nu served as a member of the Jedi High Council and trained many Padawans, including the future Emperor’s Hand, Jerec, Olee Starstone, whom she tutored in the years prior to the Clone Wars, and Jin-Lo Rayce, founder of the Agents of Ossus.   Jocasta Nu died when the 501st Legion ransacked the Jedi Temple at the end of the Clone Wars.

    read more

    Plo Koon (Episode I/II)

    Plo Koon (Episode I/II)

    Plo Koon was a Kel Dor male from the planet Dorin who became a Jedi Master and a lifetime member of the Jedi High Council, holding the position from after the Stark Hyperspace War to the end of the Galactic Republic in 19 BBY. During the Clone Wars, Koon served as a Jedi General in the Grand Army of the Republic, leading soldiers in campaigns, fighting on Geonosis and at Kaliida Shoals amongst others. Koon was also an accomplished starfighter pilot.

    read more

    Kit Fisto (Episode II/III)

    Kit Fisto (Episode II/III)

    Kit Fisto was a renowned male Nautolan Jedi Master in the waning years of the Galactic Republic. During the Clone Wars, he served as a Jedi General in the Grand Army of the Republic, as well as a member of the Jedi High Council.

    read more

    Mace Windu (Episode II/III)

    Mace Windu (Episode II/III)

    CHARACTER DESCRIPTION
    Mace Windu was a male Korun Jedi Master of legendary status who was the Master of the Order in the days leading up to the Battle of Geonosis, after which he gave the title to Grand Master Yoda. Hailing from the world of Haruun Kal, Mace Windu served as one of the last members of the Jedi High Council before the Great Jedi Purge. Serving on the Council, Windu was often regarded as second only to the Grand Master Yoda, though Windu was eight centuries Yoda’s junior. Windu’s wisdom and power were considered legendary by many, as were the weight of his words.

    read more

    Mace Windu (Episode I)

    Mace Windu (Episode I)

    CHARACTER DESCRIPTION
    Mace Windu was a male Korun Jedi Master of legendary status who was the Master of the Order in the days leading up to the Battle of Geonosis, after which he gave the title to Grand Master Yoda. Hailing from the world of Haruun Kal, Mace Windu served as one of the last members of the Jedi High Council before the Great Jedi Purge. Serving on the Council, Windu was often regarded as second only to the Grand Master Yoda, though Windu was eight centuries Yoda’s junior. Windu’s wisdom and power were considered legendary by many, as were the weight of his words.

    read more

    Barriss Offee

    Barriss Offee

    CHARACTER DESCRIPTION

    Barriss Offee was a Mirialan Jedi Knight and General during the Clone Wars. A skilled Jedi Healer, Offee utilized her abilities at a Rimsoo on Drongar during the galactic conflict. Trained by Jedi Master Luminara Unduli in the years leading up to the Clone Wars, Offee fought in tandem with her master in skirmishes on Ansion and Ilum. She carried a blue lightsaber and was a practitioner of Soresu.

    read more

    Corran Horn, Jedi Knight

    Corran Horn, Jedi Knight

    CHARACTER DESCRIPTION
    Corran Horn was a Force-sensitive Human male Corellian pilot who served as a Corellian Security Force investigator, a Rogue Squadron ace and New Republic hero, and later a Jedi Master of the New Jedi Order.

    read more

    Jaina Solo, New Republic Jedi

    Jaina Solo, New Republic Jedi

    CHARACTER DESCRIPTION
    Jaina Solo Fel was a Human female Jedi Master of the New Jedi Order, member of the Jedi High Council, the wife of Jagged Fel, the twin sister of Jacen Solo and the older sister of Anakin Solo. Born to Han and Leia Organa Solo, she inherited her father’s mechanical aptitude and her mother’s Force sensitivity, resulting in her eventual training at the Jedi Praxeum. (Source Wookieepedia)

    read more

    Kyle Katarn (Jedi Knight: Dark Forces II)

    Kyle Katarn (Jedi Knight: Dark Forces II)

    CHARACTER DESCRIPTION
    Kyle Katarn was a famous Human male Rebel operative from Sulon and later a Jedi of the New Jedi Order. He was a former Imperial stormtrooper who defected to the Rebellion. Often paired with fellow Rebel agent and smuggler Jan Ors, he performed many covert missions for the Rebel Alliance and later the New Republic, including the sabotage of the Dark Trooper Project.

    read more

    Jedi Costume Standards (Generic)

    Jedi Costume Standards (Generic)

    CHARACTER DESCRIPTION
    A Jedi was a member of the Jedi Order, who studied, served and used the mystical energies of the Force; usually, the light side of the Force. The weapon of the Jedi was the lightsaber, a weapon with a blade made of pure energy. The Jedi fought for peace and justice in the Galactic Republic, usually against their mortal enemies, the Sith and Dark Jedi, who studied the dark side of the Force. (Source Wookieepedia)

    read more

    Handmaiden

    Handmaiden

    Handmaidens were personal aides to royal personalities of the galaxy.

    Perhaps the most notable of handmaidens were the handmaidens of the Monarch of Naboo. An unidentified Queen, who reigned long before the Invasion of Naboo, began the custom for Naboo monarchs to have an entourage of handmaidens to ensure their safety.During the reign of Queen Amidala, the handmaidens bore a striking resemblance to their mistress. They were highly trained in order to act as bodyguards, decoys and confidantes to the Queen,roles devised by Captain Panaka. Queens Jamillia and Kylantha were also known to employ handmaidens.

    read more

    Handmaiden (Funeral Gown)

    Handmaiden (Funeral Gown)

    CHARACTER DESCRIPTION

    Handmaidens were personal aides to royal personalities of the galaxy.

    Perhaps the most notable of handmaidens were the handmaidens of the Monarch of Naboo. An unidentified Queen, who reigned long before the Invasion of Naboo, began the custom for Naboo monarchs to have an entourage of handmaidens to ensure their safety.During the reign of Queen Amidala, the handmaidens bore a striking resemblance to their mistress. They were highly trained in order to act as bodyguards, decoys and confidantes to the Queen,roles devised by Captain Panaka. Queens Jamillia and Kylantha were also known to employ handmaidens.

    read more

    Motee (Senate Gown)

    Motee (Senate Gown)

    CHARACTER DESCRIPTION

    Moteé was a Human female handmaiden who served Senator Padmé Amidala during the Clone Wars. She worked alongside her fellow handmaiden, Ellé, during the last years of the Galactic Republic while their mistress served in the Galactic Senate.

    read more

    Handmaiden (Lilac Outfit)

    Handmaiden (Lilac Outfit)

    CHARACTER DESCRIPTION

    Handmaidens were personal aides to royal personalities of the galaxy.

    Perhaps the most notable of handmaidens were the handmaidens of the Monarch of Naboo. An unidentified Queen, who reigned long before the Invasion of Naboo, began the custom for Naboo monarchs to have an entourage of handmaidens to ensure their safety.During the reign of Queen Amidala, the handmaidens bore a striking resemblance to their mistress. They were highly trained in order to act as bodyguards, decoys and confidantes to the Queen,roles devised by Captain Panaka. Queens Jamillia and Kylantha were also known to employ handmaidens.

    read more

    Dorme (Farewell Gown)

    Dorme (Farewell Gown)

    CHARACTER DESCRIPTION

    Dormé was a Human female from Naboo and one of the most devoted handmaidens of Padmé Amidala during the former Queen’s time as the Senatorial representative of the Chommell sector in the Galactic Senate.

    read more

    Dorme (Packing Gown)

    Dorme (Packing Gown)

    CHARACTER DESCRIPTION

    Dormé was a Human female from Naboo and one of the most devoted handmaidens of Padmé Amidala during the former Queen’s time as the Senatorial representative of the Chommell sector in the Galactic Senate.

    read more

    Dorme (Nightgown and Robe)

    Dorme (Nightgown and Robe)

    CHARACTER DESCRIPTION

    Dormé was a Human female from Naboo and one of the most devoted handmaidens of Padmé Amidala during the former Queen’s time as the Senatorial representative of the Chommell sector in the Galactic Senate.

    read more

    Dorme (Dark Purple Senate Cloak)

    Dorme (Dark Purple Senate Cloak)

    CHARACTER DESCRIPTION

    Dormé was a Human female from Naboo and one of the most devoted handmaidens of Padmé Amidala during the former Queen’s time as the Senatorial representative of the Chommell sector in the Galactic Senate.

    read more

    Corde (White Arrival Gown)

    Corde (White Arrival Gown)

    Cordé was a Human female handmaiden and decoy for Senator Padmé Amidala of Naboo during the end of the Separatist Crisis. While Amidala was Queen of Naboo, the role of decoy was mainly filled by Sabé. Cordé replaced her when Amidala stepped down from the throne and became the Senatorial representative of the Chommell sector. Like Sabé, Cordé worked closely with Padmé, and the two women became close friends.

    read more

    Handmaiden (Parade Gown)

    Handmaiden (Parade Gown)

    CHARACTER DESCRIPTION

    Handmaidens were personal aides to royal personalities of the galaxy.

    Perhaps the most notable of handmaidens were the handmaidens of the Monarch of Naboo. An unidentified Queen, who reigned long before the Invasion of Naboo, began the custom for Naboo monarchs to have an entourage of handmaidens to ensure their safety.During the reign of Queen Amidala, the handmaidens bore a striking resemblance to their mistress. They were highly trained in order to act as bodyguards, decoys and confidantes to the Queen,roles devised by Captain Panaka. Queens Jamillia and Kylantha were also known to employ handmaidens.

    read more

    Handmaiden (Senate Gown)

    Handmaiden (Senate Gown)

    CHARACTER DESCRIPTION

    Handmaidens were personal aides to royal personalities of the galaxy.

    Perhaps the most notable of handmaidens were the handmaidens of the Monarch of Naboo. An unidentified Queen, who reigned long before the Invasion of Naboo, began the custom for Naboo monarchs to have an entourage of handmaidens to ensure their safety.During the reign of Queen Amidala, the handmaidens bore a striking resemblance to their mistress. They were highly trained in order to act as bodyguards, decoys and confidantes to the Queen,roles devised by Captain Panaka. Queens Jamillia and Kylantha were also known to employ handmaidens.

    read more

    Handmaiden (Maroon Cloak)

    Handmaiden (Maroon Cloak)

    CHARACTER DESCRIPTION

    Handmaidens were personal aides to royal personalities of the galaxy.

    Perhaps the most notable of handmaidens were the handmaidens of the Monarch of Naboo. An unidentified Queen, who reigned long before the Invasion of Naboo, began the custom for Naboo monarchs to have an entourage of handmaidens to ensure their safety.During the reign of Queen Amidala, the handmaidens bore a striking resemblance to their mistress. They were highly trained in order to act as bodyguards, decoys and confidantes to the Queen,roles devised by Captain Panaka. Queens Jamillia and Kylantha were also known to employ handmaidens.

    read more

    Handmaiden (Pre-Senate Robe)

    Handmaiden (Pre-Senate Robe)

    CHARACTER DESCRIPTION

    Handmaidens were personal aides to royal personalities of the galaxy.

    Perhaps the most notable of handmaidens were the handmaidens of the Monarch of Naboo. An unidentified Queen, who reigned long before the Invasion of Naboo, began the custom for Naboo monarchs to have an entourage of handmaidens to ensure their safety.During the reign of Queen Amidala, the handmaidens bore a striking resemblance to their mistress. They were highly trained in order to act as bodyguards, decoys and confidantes to the Queen,roles devised by Captain Panaka. Queens Jamillia and Kylantha were also known to employ handmaidens.

    read more

    Handmaiden (Gold Gown)

    Handmaiden (Gold Gown)

    Handmaidens were personal aides to royal personalities of the galaxy.

    Perhaps the most notable of handmaidens were the handmaidens of the Monarch of Naboo. An unidentified Queen, who reigned long before the Invasion of Naboo, began the custom for Naboo monarchs to have an entourage of handmaidens to ensure their safety.During the reign of Queen Amidala, the handmaidens bore a striking resemblance to their mistress. They were highly trained in order to act as bodyguards, decoys and confidantes to the Queen,roles devised by Captain Panaka. Queens Jamillia and Kylantha were also known to employ handmaidens.

    read more

    Handmaiden (Battle Handmaiden)

    Handmaiden (Battle Handmaiden)

    Handmaidens were personal aides to royal personalities of the galaxy.

    Perhaps the most notable of handmaidens were the handmaidens of the Monarch of Naboo. An unidentified Queen, who reigned long before the Invasion of Naboo, began the custom for Naboo monarchs to have an entourage of handmaidens to ensure their safety.During the reign of Queen Amidala, the handmaidens bore a striking resemblance to their mistress. They were highly trained in order to act as bodyguards, decoys and confidantes to the Queen,roles devised by Captain Panaka. Queens Jamillia and Kylantha were also known to employ handmaidens.

    read more

    Padme Amidala (Flame Gown)

    Padme Amidala (Flame Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Sabé ( Battle Decoy)

    Sabé ( Battle Decoy)

    CHARACTER DESCRIPTION

    Sabé was a Human female who served as a loyal handmaiden to Queen Padmé Amidala during her reign as Monarch of Naboo. A native of Naboo, Sabé was handpicked by Captain Panaka of the Royal Naboo Security Forces shortly after Amidala’s coronation, due to her strong resemblance to the new Queen. Along with the other handmaidens, Sabé was trained to serve as both an attendant and a bodyguard, and as the most important of her group, she was chosen to be the first in line to take the Queen’s place in times of crisis, as a decoy. Together with Amidala, Sabé perfected her act as Queen, learning to mimic the monarch accurately.

    read more

    Leia Organa (New Jedi Order novel series)

    Leia Organa (New Jedi Order novel series)

    CHARACTER DESCRIPTION
    Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan.  An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia)

    read more

    Leia Organa (Ewok Village gown)

    Leia Organa (Ewok Village gown)

    CHARACTER DESCRIPTION
    Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia)

    read more

    Leia Organa (Endor Commando gear)

    Leia Organa (Endor Commando gear)

    CHARACTER DESCRIPTION
    Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia)

    read more

    Leia Organa (Rebel Briefing uniform)

    Leia Organa (Rebel Briefing uniform)

    CHARACTER DESCRIPTION
    Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia)

    read more

    Leia Organa (Slave outfit)

    Leia Organa (Slave outfit)

    CHARACTER DESCRIPTION
    Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia)

    read more

    Leia Organa (Boushh disguise)

    Leia Organa (Boushh disguise)

    CHARACTER DESCRIPTION
    Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia)

    read more

    Leia Organa (end scene gown)

    Leia Organa (end scene gown)

    CHARACTER DESCRIPTION
    Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia)

    read more

    Leia Organa (Bespin escape)

    Leia Organa (Bespin escape)

    CHARACTER DESCRIPTION
    Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia)

    read more

    Leia Organa (Bespin gown)

    Leia Organa (Bespin gown)

    CHARACTER DESCRIPTION
    Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia)

    read more

    Leia Organa (Hoth gear)

    Leia Organa (Hoth gear)

    CHARACTER DESCRIPTION
    Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia)

    read more

    Leia Organa (Ceremonial gown)

    Leia Organa (Ceremonial gown)

    CHARACTER DESCRIPTION
    Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia)

    read more

    Leia Organa (Senatorial gown)

    Leia Organa (Senatorial gown)

    CHARACTER DESCRIPTION
    Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia)

    read more

    Padmé Amidala (Wedding Gown)

    Padmé Amidala (Wedding Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala (Ripped Arena Battle)

    Padmé Amidala (Ripped Arena Battle)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala (Arena Battle)

    Padmé Amidala (Arena Battle)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala (Poncho)

    Padmé Amidala (Poncho)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala ( Light Blue Tatooine Midriff)

    Padmé Amidala ( Light Blue Tatooine Midriff)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala (Robe & Night Gown)

    Padmé Amidala (Robe & Night Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala (Black Fireside Corset Gown)

    Padmé Amidala (Black Fireside Corset Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala (Picnic Gown)

    Padmé Amidala (Picnic Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala (Pastel Lake Gown)

    Padmé Amidala (Pastel Lake Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala (Family gown)

    Padmé Amidala (Family gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala (Refugee Gown)

    Padmé Amidala (Refugee Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala (Packing Gown)

    Padmé Amidala (Packing Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala (Apartment Nightgown)

    Padmé Amidala (Apartment Nightgown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala (Purple Senate Gown)

    Padmé Amidala (Purple Senate Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala (Deleted Senate Gown)

    Padmé Amidala (Deleted Senate Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala Naboo Fighter Pilot

    Padmé Amidala Naboo Fighter Pilot

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala-Skywalker (Animated, White Battle)

    Padmé Amidala-Skywalker (Animated, White Battle)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala-Skywalker (Ilum Snowgear)

    Padmé Amidala-Skywalker (Ilum Snowgear)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala/Skywalker (Lilac Diamonds)

    Padmé Amidala/Skywalker (Lilac Diamonds)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala/Skywalker (Water/Funeral Gown)

    Padmé Amidala/Skywalker (Water/Funeral Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala/Skywalker (Hospital Gown)

    Padmé Amidala/Skywalker (Hospital Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala/Skywalker (Tan Mustafar outfit)

    Padmé Amidala/Skywalker (Tan Mustafar outfit)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala/Skywalker (Dressing Gown)

    Padmé Amidala/Skywalker (Dressing Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala/Skywalker (Peacock Gown)

    Padmé Amidala/Skywalker (Peacock Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala/Skywalker (Senate Gown)

    Padmé Amidala/Skywalker (Senate Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala/Skywalker (Aqua Georgette Gown)

    Padmé Amidala/Skywalker (Aqua Georgette Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala/Skywalker (Olive Gown)

    Padmé Amidala/Skywalker (Olive Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala/Skywalker (Navy Blue Linen Dress)

    Padmé Amidala/Skywalker (Navy Blue Linen Dress)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala/Skywalker (Revelation Gown)

    Padmé Amidala/Skywalker (Revelation Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala/Skywalker (Veranda Night Gown)

    Padmé Amidala/Skywalker (Veranda Night Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala-Skywalker (Midnight Blue Velvet Cloak)

    Padmé Amidala-Skywalker (Midnight Blue Velvet Cloak)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Queen Amidala (Parade Gown)

    Queen Amidala (Parade Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Queen Amidala (Coruscant Gown)

    Queen Amidala (Coruscant Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Queen Amidala (Senate Gown)

    Queen Amidala (Senate Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Queen Amidala (Pre-Senate Kimono)

    Queen Amidala (Pre-Senate Kimono)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Padmé Amidala (Tatooine Peasant)

    Padmé Amidala (Tatooine Peasant)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Queen Amidala (Travel Gown)

    Queen Amidala (Travel Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Queen Amidala (Black Decoy Gown)

    Queen Amidala (Black Decoy Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Queen Amidala (Red Invasion Gown)

    Queen Amidala (Red Invasion Gown)

    Padmé Naberrie of Naboo was the younger daughter of Ruwee and Jobal Naberrie, and the sister of Sola Naberrie. Later in her life, Amidala became the secret wife of Jedi Knight Anakin Skywalker and the mother of Luke Skywalker and Leia Organa Solo, two of the most important figures in Galactic history. She was also the grandmother of Jaina, Jacen and Anakin Solo, as well as Ben Skywalker. This relationship made her great-grandmother of Allana Solo, Jacen Solo’s daughter, and an ancestor of Nat, Kol, Cade Skywalker, and Ania Solo.

    read more

    Senate Guard (Episode III: Revenge of the Sith)

    Senate Guard (Episode III: Revenge of the Sith)

    CHARACTER DESCRIPTION
    The Senate Guard, sometimes called the Blue Guard and, prior to 22 BBY, informally known as the Coruscant Guard, was a law enforcement agency of the Galactic Republic.

    read more

    Senate Guard (Episode I & Episode II)

    Senate Guard (Episode I & Episode II)

    CHARACTER DESCRIPTION
    The Senate Guard, sometimes called the Blue Guard and, prior to 22 BBY, informally known as the Coruscant Guard, was a law enforcement agency of the Galactic Republic.

    read more

    Queen Apailana Ep3

    Queen Apailana Ep3

    Apailana was a Human female who served as the successor to Neeyutnee as Queen of Naboo, replacing her following Neeyutnee’s two-year term. In a similar fashion to the previous monarchs, she was formally styled Her Royal Highness, Queen Apailana of Naboo during her two-year reign. Apailana was assassinated in 18 BBY by the Empire after it was revealed that she was harboring Jedi fugitives of Order 66 on Naboo.

    read more

    Queen Jamilia (Ep2)

    Queen Jamilia (Ep2)

    CHARACTER DESCRIPTION

    Jamillia was a Human female who served as the successor of Queen Amidala, formally styled as Her Royal Highness, Queen Jamillia of Naboo. Jamillia, like her predecessor, was a young woman when elected (though not as young as Padmé Amidala was during her first term), with a regal and dignified bearing.

    read more

    Senator Mon Mothma (Bail’s Office)

    Senator Mon Mothma (Bail’s Office)

    CHARACTER DESCRIPTION

    Mon Mothma, a native of Chandrila, was a female Human who served an important political figure from the waning days of the Galactic Republic, one of the founders of the Alliance to Restore the Republic, and the first Chief of State of the New Republic. When the foundation of the Galactic Empire replaced the Republic that had existed for many millennia, she met with her allies in the Senate, such as Senators Padmé Amidala and Bail Prestor Organa. In 2 BBY, she signed the Corellian Treaty, along with Organa, Garm Bel Iblis, Rahm Kota, and Galen Marek, in order to form the Alliance to Restore the Republic. She, along with the others, were taken captive aboard the Death Star I, although they were rescued. She played an important role in the ensuing Galactic Civil War, and after the decisive Rebel victory at the Battle of Endor, she became the first Chief of State of the newly founded New Republic. She also had a daughter, Lieda, and a son, Jobin. In 24 ABY, she passed away peacefully on Chandrila.

    read more

    Senator Mon Mothma (Padme’s Apartments)

    Senator Mon Mothma (Padme’s Apartments)

    CHARACTER DESCRIPTION

    Mon Mothma, a native of Chandrila, was a female Human who served an important political figure from the waning days of the Galactic Republic, one of the founders of the Alliance to Restore the Republic, and the first Chief of State of the New Republic. When the foundation of the Galactic Empire replaced the Republic that had existed for many millennia, she met with her allies in the Senate, such as Senators Padmé Amidala and Bail Prestor Organa. In 2 BBY, she signed the Corellian Treaty, along with Organa, Garm Bel Iblis, Rahm Kota, and Galen Marek, in order to form the Alliance to Restore the Republic. She, along with the others, were taken captive aboard the Death Star I, although they were rescued. She played an important role in the ensuing Galactic Civil War, and after the decisive Rebel victory at the Battle of Endor, she became the first Chief of State of the newly founded New Republic. She also had a daughter, Lieda, and a son, Jobin. In 24 ABY, she passed away peacefully on Chandrila.

    read more

    Sheltay Retrac, Aide to Bail Organa

    Sheltay Retrac, Aide to Bail Organa

    CHARACTER DESCRIPTION

    Sheltay Retrac was a Human female from Alderaan who served as the head of Bail Organa’s aides in the closing stages of the Clone Wars. During the conflict, she took part in at least two secret missions, one of which aimed at freeing the Jedi Master Shaak Ti from the gaols of Metalorn. With her husband, an artist from the Castle Lands of Alderaan, Retrac had given birth to a girl named Winter. She died shortly after the establishment of Palpatine’s Galactic Empire, leaving her daughter in the hands of Bail Organa.

    read more

    Queen Breha Organa

    Queen Breha Organa

    CHARACTER DESCRIPTION

    Breha Organa, born Breha Antilles, was a female Human who was the Queen and Minister of Education of Alderaan at the time of the Galactic Empire’s formation. She was the wife of Prince Bail Organa, Viceroy and First Chairman of the Alderaan system. The couple longed for a child for many years, but Queen Breha suffered multiple miscarriages that put her own life at risk. Eventually, the Organas adopted the baby girl of the late Senator Amidala after the end of the Clone Wars, bent on raising her as their own daughter, the Princess Leia Organa. In the early days of the Galactic Empire, the Queen’s family helped to build a rebellion against that authoritary government. Breha Organa later perished when the Empire disintegrated Alderaan into dust with the superlaser of their brand new Death Star battlestation. Years after her passing, she was remembered as a loving mother, and a simple mention of her past authority would still awaken the sense of patriotism in the Alderaanians.

    read more

    Senator Bail Organa (Alderaan Balcony)

    Senator Bail Organa (Alderaan Balcony)

    CHARACTER DESCRIPTION

    Bail Prestor Organa was a Human male who served as the First Chairman and Viceroy of Alderaan, and served in the Galactic Senate as the Senator of the Alderaan sector from 32 BBY to 19 BBY. Subsequently, he was Senator of the Alderaan sector of the Imperial Senate from 19 BBY to 1 BBY. He was Princess Leia Organa’s adoptive father and a friend of Jedi Masters Obi-Wan Kenobi, Yoda and Rahm Kota. He was married to Queen Breha Organa of Alderaan and was, as Prince Consort, head of the royal house and ruler of Alderaan. One of the main founders of the Rebel Alliance, he was killed when the Death Star obliterated Alderaan. In the Alliance and its successor states, the New Republic and Galactic Federation of Free Alliances, he was respected as a martyr who died for his cause.

    read more

    Senator Bail Organa (Senate Chamber)

    Senator Bail Organa (Senate Chamber)

    CHARACTER DESCRIPTION

    Bail Prestor Organa was a Human male who served as the First Chairman and Viceroy of Alderaan, and served in the Galactic Senate as the Senator of the Alderaan sector from 32 BBY to 19 BBY. Subsequently, he was Senator of the Alderaan sector of the Imperial Senate from 19 BBY to 1 BBY. He was Princess Leia Organa’s adoptive father and a friend of Jedi Masters Obi-Wan Kenobi, Yoda and Rahm Kota. He was married to Queen Breha Organa of Alderaan and was, as Prince Consort, head of the royal house and ruler of Alderaan. One of the main founders of the Rebel Alliance, he was killed when the Death Star obliterated Alderaan. In the Alliance and its successor states, the New Republic and Galactic Federation of Free Alliances, he was respected as a martyr who died for his cause.

    read more

    Senator Bail Organa (Tantive IV)

    Senator Bail Organa (Tantive IV)

    CHARACTER DESCRIPTION

    Bail Prestor Organa was a Human male who served as the First Chairman and Viceroy of Alderaan, and served in the Galactic Senate as the Senator of the Alderaan sector from 32 BBY to 19 BBY. Subsequently, he was Senator of the Alderaan sector of the Imperial Senate from 19 BBY to 1 BBY. He was Princess Leia Organa’s adoptive father and a friend of Jedi Masters Obi-Wan Kenobi, Yoda and Rahm Kota. He was married to Queen Breha Organa of Alderaan and was, as Prince Consort, head of the royal house and ruler of Alderaan. One of the main founders of the Rebel Alliance, he was killed when the Death Star obliterated Alderaan. In the Alliance and its successor states, the New Republic and Galactic Federation of Free Alliances, he was respected as a martyr who died for his cause.

    read more

    Senator Bail Organa (Jedi Temple)

    Senator Bail Organa (Jedi Temple)

    CHARACTER DESCRIPTION

    Bail Prestor Organa was a Human male who served as the First Chairman and Viceroy of Alderaan, and served in the Galactic Senate as the Senator of the Alderaan sector from 32 BBY to 19 BBY. Subsequently, he was Senator of the Alderaan sector of the Imperial Senate from 19 BBY to 1 BBY. He was Princess Leia Organa’s adoptive father and a friend of Jedi Masters Obi-Wan Kenobi, Yoda and Rahm Kota. He was married to Queen Breha Organa of Alderaan and was, as Prince Consort, head of the royal house and ruler of Alderaan. One of the main founders of the Rebel Alliance, he was killed when the Death Star obliterated Alderaan. In the Alliance and its successor states, the New Republic and Galactic Federation of Free Alliances, he was respected as a martyr who died for his cause.

    read more

    Senator Bail Organa (Padme’s Apartments)

    Senator Bail Organa (Padme’s Apartments)

    Bail Prestor Organa was a Human male who served as the First Chairman and Viceroy of Alderaan, and served in the Galactic Senate as the Senator of the Alderaan sector from 32 BBY to 19 BBY. Subsequently, he was Senator of the Alderaan sector of the Imperial Senate from 19 BBY to 1 BBY. He was Princess Leia Organa’s adoptive father and a friend of Jedi Masters Obi-Wan Kenobi, Yoda and Rahm Kota. He was married to Queen Breha Organa of Alderaan and was, as Prince Consort, head of the royal house and ruler of Alderaan. One of the main founders of the Rebel Alliance, he was killed when the Death Star obliterated Alderaan. In the Alliance and its successor states, the New Republic and Galactic Federation of Free Alliances, he was respected as a martyr who died for his cause.

    read more

    Senator Bail Organa (Bail’s Office)

    Senator Bail Organa (Bail’s Office)

    Bail Prestor Organa was a Human male who served as the First Chairman and Viceroy of Alderaan, and served in the Galactic Senate as the Senator of the Alderaan sector from 32 BBY to 19 BBY. Subsequently, he was Senator of the Alderaan sector of the Imperial Senate from 19 BBY to 1 BBY. He was Princess Leia Organa’s adoptive father and a friend of Jedi Masters Obi-Wan Kenobi, Yoda and Rahm Kota. He was married to Queen Breha Organa of Alderaan and was, as Prince Consort, head of the royal house and ruler of Alderaan. One of the main founders of the Rebel Alliance, he was killed when the Death Star obliterated Alderaan. In the Alliance and its successor states, the New Republic and Galactic Federation of Free Alliances, he was respected as a martyr who died for his cause.

    read more

    Senator Bail Organa (Senate Landing)

    Senator Bail Organa (Senate Landing)

    Bail Prestor Organa was a Human male who served as the First Chairman and Viceroy of Alderaan, and served in the Galactic Senate as the Senator of the Alderaan sector from 32 BBY to 19 BBY. Subsequently, he was Senator of the Alderaan sector of the Imperial Senate from 19 BBY to 1 BBY. He was Princess Leia Organa’s adoptive father and a friend of Jedi Masters Obi-Wan Kenobi, Yoda and Rahm Kota. He was married to Queen Breha Organa of Alderaan and was, as Prince Consort, head of the royal house and ruler of Alderaan. One of the main founders of the Rebel Alliance, he was killed when the Death Star obliterated Alderaan. In the Alliance and its successor states, the New Republic and Galactic Federation of Free Alliances, he was respected as a martyr who died for his cause.

    read more

    Senator Bail Organa (Chancellor’s Office)

    Senator Bail Organa (Chancellor’s Office)

    Bail Prestor Organa was a Human male who served as the First Chairman and Viceroy of Alderaan, and served in the Galactic Senate as the Senator of the Alderaan sector from 32 BBY to 19 BBY. Subsequently, he was Senator of the Alderaan sector of the Imperial Senate from 19 BBY to 1 BBY. He was Princess Leia Organa’s adoptive father and a friend of Jedi Masters Obi-Wan Kenobi, Yoda and Rahm Kota. He was married to Queen Breha Organa of Alderaan and was, as Prince Consort, head of the royal house and ruler of Alderaan. One of the main founders of the Rebel Alliance, he was killed when the Death Star obliterated Alderaan. In the Alliance and its successor states, the New Republic and Galactic Federation of Free Alliances, he was respected as a martyr who died for his cause.

    read more

    Chancellor Palpatine (Chancellor’s Office)

    Chancellor Palpatine (Chancellor’s Office)

    CHARACTER DESCRIPTION

    Palpatine, also known as Darth Sidious, was a Force-sensitive Human male who served as the last Supreme Chancellor of the Galactic Republic and the first Emperor of the Galactic Empire. A Dark Lord of the Sith in the Order of the Sith Lords, recorded by history as the most powerful who had ever lived, his entire life was the culmination of a thousand-year plan to overthrow the Republic and the Jedi Order from within.

    read more

    Chancellor Palpatine (Episode III, Senate Chamber)

    Chancellor Palpatine (Episode III, Senate Chamber)

    CHARACTER DESCRIPTION

    Palpatine, also known as Darth Sidious, was a Force-sensitive Human male who served as the last Supreme Chancellor of the Galactic Republic and the first Emperor of the Galactic Empire. A Dark Lord of the Sith in the Order of the Sith Lords, recorded by history as the most powerful who had ever lived, his entire life was the culmination of a thousand-year plan to overthrow the Republic and the Jedi Order from within.

    read more

    Chancellor Palpatine (Episode III, Opera House)

    Chancellor Palpatine (Episode III, Opera House)

    CHARACTER DESCRIPTION

    Palpatine, also known as Darth Sidious, was a Force-sensitive Human male who served as the last Supreme Chancellor of the Galactic Republic and the first Emperor of the Galactic Empire. A Dark Lord of the Sith in the Order of the Sith Lords, recorded by history as the most powerful who had ever lived, his entire life was the culmination of a thousand-year plan to overthrow the Republic and the Jedi Order from within.

    read more

    Chancellor Palpatine (Episode III, Federation Cruiser)

    Chancellor Palpatine (Episode III, Federation Cruiser)

    CHARACTER DESCRIPTION

    Palpatine, also known as Darth Sidious, was a Force-sensitive Human male who served as the last Supreme Chancellor of the Galactic Republic and the first Emperor of the Galactic Empire. A Dark Lord of the Sith in the Order of the Sith Lords, recorded by history as the most powerful who had ever lived, his entire life was the culmination of a thousand-year plan to overthrow the Republic and the Jedi Order from within.

    read more

    Chancellor Palpatine (Episode III, Senate Robes)

    Chancellor Palpatine (Episode III, Senate Robes)

    CHARACTER DESCRIPTION

    Palpatine, also known as Darth Sidious, was a Force-sensitive Human male who served as the last Supreme Chancellor of the Galactic Republic and the first Emperor of the Galactic Empire. A Dark Lord of the Sith in the Order of the Sith Lords, recorded by history as the most powerful who had ever lived, his entire life was the culmination of a thousand-year plan to overthrow the Republic and the Jedi Order from within.

    read more

    Chancellor Palpatine (Episode II, Chancellor’s Office)

    Chancellor Palpatine (Episode II, Chancellor’s Office)

    CHARACTER DESCRIPTION

    Palpatine, also known as Darth Sidious, was a Force-sensitive Human male who served as the last Supreme Chancellor of the Galactic Republic and the first Emperor of the Galactic Empire. A Dark Lord of the Sith in the Order of the Sith Lords, recorded by history as the most powerful who had ever lived, his entire life was the culmination of a thousand-year plan to overthrow the Republic and the Jedi Order from within.

    read more

    Senator Palpatine (Episode I, Senatorial Robes)

    Senator Palpatine (Episode I, Senatorial Robes)

    CHARACTER DESCRIPTION

    Palpatine, also known as Darth Sidious, was a Force-sensitive Human male who served as the last Supreme Chancellor of the Galactic Republic and the first Emperor of the Galactic Empire. A Dark Lord of the Sith in the Order of the Sith Lords, recorded by history as the most powerful who had ever lived, his entire life was the culmination of a thousand-year plan to overthrow the Republic and the Jedi Order from within.

    read more

    Chancellor Valorum (Senate Robes)

    Chancellor Valorum (Senate Robes)

    CHARACTER DESCRIPTION

    Finis Valorum was a Human male who served as the Chancellor of the Galactic Republic, holding office from 40 BBY until Queen Padmé Amidala introduced a Vote of No Confidence against him in the Galactic Senate in 32 BBY (after being tricked into doing this by Senator Palpatine). He was subsequently replaced by Palpatine of Naboo.

    read more

    ARC Null Class, Clone Trooper (realistic)

    ARC Null Class, Clone Trooper (realistic)

    CHARACTER DESCRIPTION Numbering only six, the Null-class Advanced Recon Commandos were the first clones of Jango Fett created by the Kaminoan cloners, and the prototypes for the Grand Army of the Republic. They were deemed a failure by the Kaminoans and were not put into mass-production. However, Mandalorian mercenary Kal Skirata saved them from termination by the Kaminoans and later adopted all of them. All of the Nulls were named after Mandalorian warriors. (Source: Wookiepedia) REQUIRED ITEMS NOTE: This clone wears Phase I (Episode II) armor with additional paint and accessories. Only those additional items are listed here. 1. Helmet Colored command stripe around visor and down center of dome (Yellow=Commander / Red=Captain / Blue=Lieutenant / Moss Green=Sergeant) Fett-style Range Finder on right side of helmet. Mounted in the ear, not to the outside. Stalk should be metal colored. Range finder should be black. 2. Armor  Chest Four command dots lined on the left breast. (Red=Captain… Blue=Lieutenant… Moss Green=Sergeant). Dots are approximately .5 to .75 inches in diameter Shoulders Rank stripe down the center (2) Upper Arms Rank stripe on the outside of the bicep, located slightly more toward the front (2) Elbows Rank stripe on outer half of elbow plate (2) Forearms Raised left forearm includes metallic dart, 5 square yellow buttons on outer area and two buttons on inner area of forearm Rank stripe on upper/outside (2) Handplates Entire plate painted with rank color  3. Pauldron Episode III style One large shoulder plate approximately the width of the helmet and painted with matching rank color  One black smaller shoulder plate approximately the same width as the distance from the neck and outer line of the armor at the shoulder  Mantle (or base) should be black 4. Kama Charcoal grey and rectangular shaped with 4 inch “V” cut in bottom/center Matching rank color trim, 1 inch wide Optional 1. Pistols and Holsters One holster on each hip, hanging from the belt ARC or DC-17 pistols acceptable 2. Large Boba Fett-style belt pouches 2 pouches or boxes hanging from opposite sides of belt at hips Pouches/boxes may be soft or rigid 3. Right forearm 4 square yellow buttons Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    ARC, Standard Class, Clone Trooper

    ARC, Standard Class, Clone Trooper

    CHARACTER DESCRIPTION Advanced Recon Commandos, also known as Advanced Recon Clone troopers or simply ARC troopers—were an elite variant of clone trooper in the Grand Army of the Republic during the Clone Wars. Although less numerous than the other clones, they were also among the most skilled soldiers in the galaxy.   (Source: Wookiepedia) REQUIRED ITEMS NOTE: This clone wears Phase I (Episode II) armor with additional paint and accessories. Only those additional items are listed here. 1. Helmet Colored command stripe around visor and down center of dome (Yellow=Commander / Red=Captain / Blue=Lieutenant / Moss Green=Sergeant) Fett-style Range Finder on right side of helmet. Mounted in the ear, not to the outside. Stalk should be metal colored. Range finder should be black. 2. Armor  Chest Shoulders Rank stripe down the center (2) Upper Arms Rank stripe on the outside of the bicep, located slightly more toward the front (2) Elbows Rank stripe on outer half of elbow plate (2) Forearms Raised left forearm includes metallic dart, 5 square yellow buttons on outer area and two buttons on inner area of forearm Rank stripe on upper/outside (2) Handplates Entire plate painted with rank color  3. Pauldron ARC style pauldron Black with 4 panels over left shoulder painted to match rank color 4. Kama Charcoal grey Front/bottom corners should extend to bottom of knee plates 2 triangular detail pieces at front/top Matching rank color trim, 1 inch wide Optional 1. Pistols and Holsters (Red ARC only) One holster on each hip, hanging from the belt Option A – 2 DC-17 Pistols Option B – 2 ARC Trooper pistols 2. Pauldron Option (Red ARC only) 2 or 3 black leather or leather-like ammo pouches hang from pauldron on right breast 3. Large Boba Fett-style belt pouches (Blue ARC only) 2 pouches or boxes hanging from opposite sides of belt at hips Pouches/boxes may be soft or rigid 4. Kama Option 4 inch “V” cut in bottom/center Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Clone Trooper Soldier, The Clone Wars (animated style)

    Clone Trooper Soldier, The Clone Wars (animated style)

    CHARACTER DESCRIPTION Clone troopers were an army of identical, genetically-modified clones, created to serve in the Grand Army of the Republic during the full-scale intergalactic conflict that came to be known as the Clone Wars. Grown at an accelerated rate and raised in the laboratories and facilities of Kamino, the clone troopers were trained throughout the first ten years of their lives to become one of the most efficient military forces in galactic history. Bred for the sole purpose of combat, the clones were indoctrinated with unwavering obedience to the Galactic Republic and—more specifically—their Commander-in-Chief, the Supreme Chancellor. For roughly three years, the clone troopers fought to defend Republic sovereignty against the Separatist rebellion. Throughout the conflict, the members of the Jedi Order served as commanders and generals of the Grand Army and, thus, they served alongside their clone soldiers on many occasions. But the covert Sith plot to seize control of the galaxy, masterminded by the Sith Lord Darth Sidious, effectively caused the clones to betray and destroy the Republic that they were sworn to protect with their lives. Sidious, in his public guise as Chancellor Palpatine, issued Order 66 to the clone troopers on the eve of the Clone Wars’ end. (Source: Star Wars Wiki) REQUIRED ITEMS Black Undersuit One or two piece black undersuit. Commonly used components include sports compression wear, warm-up suits, dance unitards, or diveskins. Undersuit must be smooth in appearance or with vertical ribbing with no labels or logos visible once the armor is on. Black Gloves Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin. Neck Seal Neck seal to be black in color with vertical ribbing or being smooth in appearance. No logos or labels are to be visible. If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable. Helmet The Clone Wars animated style clone helmet – Fanmade bucket. Some “name brand” helmets may be unacceptable. Visor – Black visor covers entire “T” shape and frown Helmet Fin on dome 4 black vents on each side of helmet Primer grey stripe around back of dome. NOTE: Episode II style helmets are not acceptable Armor Chest – Chest and back plate should match together at the sides with no gap, just a seam line. Back – Chest and back plate should match together at the sides with no gap, just a seam line. Shoulders Shoulder Straps – Correct shape with ridges. Upper Arms – Front/back pieces are seamless. Forearms- Inner seam/clamshell design allowed. Hand plates AB plate Kidney/Lower Back Piece Butt Plate Cod piece Upper thighs – Front/back pieces are seamless. Lower Legs Compad on left forearm Clone Trooper boots White shoes with white soles Strap across top of foot with circular detail pieces at each end Proper toe detail No laces or logos Belt The Clone Wars style belt Segmented (or segmented-look) belt One large belt box, opposite each other, on hips Thermal detonator centered on rear of belt Optional Elements listed as acceptable here may not be traditionally associated with a costume, but are not so unreasonable as to detract from it. Please keep in mind that the following items may not be...

    read more

    Clone Trooper, 327th Star Corps

    Clone Trooper, 327th Star Corps

    CHARACTER DESCRIPTION The troops of the 327th Star Corps were distinguished by striped yellow markings running the length of their armor and, as a result of Clone Marshal Commander Bly’s ARC training, his troopers were allowed to don kamas and command pauldrons. One unit within the 327th was K Company. (Source: Wookiepedia) REQUIRED ITEMS NOTE: This clone wears Phase II (Episode III) armor with additional paint and accessories. Only those additional items are listed here. Helmet Marigold color stripe down the center, starting in the rear above the grey band and tapering slightly toward the chin.  Armor Chest – Marigold stripe down the center Shoulders – Marigold stripe down the center Upper Arms – Marigold stripe on the outside of the bicep, located slightly more toward the front Forearms – Marigold stripe on upper/outside Handplates – Marigold stripes down center Knees – Marigold stripes down center Belt 2 Marigold stripes on the center-most raised rectangular details Boots 2 Marigold stripes. One on the boot strap and one just below the strap Pauldron Episode III style pauldron One large shoulder plate approximately the width of the helmet and painted in a brown/sienna color One black smaller shoulder plate approximately the same width as the distance from the neck and outer line of the armor at the shoulder Mantle (or base) should be black Note: The 327th Star Corps clone may wear the pauldron to the left or right. Ammo Boxes 3 ammo boxes are attached to a dark grey strap that is attached to the pauldron (on the opposite side of the large shoulder plate) and runs down to the belt. Outer area of boxes is white. Inner portion is raw sienna with a black square located towards the top. 2 smaller ammo boxes are attached to the bicep (opposite the large shoulder plate) on a light grey strap. One box is located on the front of the bicep and the other is located on the outside. Outer area of boxes is white. Inner portion is raw sienna. Kama Brown and rectangular shaped with 4 inch “V” cut in bottom/center Straps are attached to kama buckle with clips and are stitched to the inside of the kama Kama buckle Buckle is located under the front/center of the belt. Kama straps are attached to the buckle with clips Pistols and Holsters One holster on each hip, hanging from the belt 2 DC-17 Pistols (see photo reference) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Clone Trooper, Galactic Marine

    Clone Trooper, Galactic Marine

    CHARACTER DESCRIPTION The Galactic Marines, originally known as the 21st Nova Corps of the 4th Sector Army, was an elite unit that was created as the Grand Army of the Republic diversified during the Clone Wars. Following the formation of the Galactic Empire in 19 BBY, they became known as Imperial Galactic Marines. Source: Wookiepedia REQUIRED ITEMS 1. Undersuit The trousers are a grey and have a cod insert on the front. One rectangular cargo pocket with flap centered on the front of each thigh. Upper portion of undersuit may be black or dark grey  2. Black Gloves Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin.  3. Helmet GM Clone Style Helmet – Fanmade helmet Black or Green Visor -Welding Shield above grade 5. Lenses may be flat or bubble, either is acceptable White Cowl  4. Armor Chest – Specific shape to the GM to include 3 greeblies on front/lower area of chest plate Back – Specific shape/size to match the GM chest or regular movie style clone armor Shoulders – Specific shape to the GM, each shoulder is different shape Upper Arms – Seamless regular clone armor Forearms – Seamless regular clone armor Elbows – 2 detail slots on the outside area of both elbow pieces regular clone armor Elbow – Straps regular clone elbow straps, white in color Handplates – Regular clone armor Knees – Specific to the GM Knee Straps – Regular clone knee straps, white in color Lower shin/calf – Specific to a GM to include 2 sets of white straps with clip greeblies each Boot Armor Plates Note: All armor should be weathered. Black wash is an example of an acceptable weathering technique. Exposed rivets are not acceptable. 5. Belt Belt has 2 large and 2 small pouches accompanied by 2 buckle-looking greeblies on the front and a kama buckle in the front/center Top of belt should be mounted just below the chest/back plates with little or no gap visible  6. Boots Must be white leather or leather-like with the sole pattern to match as closely as possible to the movie costume. Most identifiable features include a high arch pattern on the inside of the sole, four profile “swoops” between the sole and leather. Snaps on both side of heel upper to secure the boot armor is suggested.  7. Kama Color should closely match that of armor Length starts just under belt down to top of shin armor / Width is larger at the top than the bottom 4″ split at back/bottom/center 2 white straps connect to belt via kama buckle  8. Ammo Boxes 3 white ammo boxes and one grey clip greeblie attached to a grey strap on right side of chest 2 smaller white ammo boxes are attached to the right bicep on a white strap.  9. Backpack Consists of a main shell and two side shells over a base mounted to the back armor. Also has a detonator type attachment underneath with 4 pouches below that and assorted greebles to the side of the backpack.  10. Pauldron Recommended These costume elements are in addition to the required list of costume parts and are optional. This list provides costuming options that increase the level of accuracy of the...

    read more

    Clone Trooper, Episode III Soldier (Phase II)

    Clone Trooper, Episode III Soldier (Phase II)

    CHARACTER DESCRIPTION The clone troopers of the Grand Army of the Republic are soldiers in the Star Wars universe, cloned from Jango Fett, a Mandalorian bounty hunter. They first appeared in Star Wars Episode II: Attack of the Clones, and returned in Star Wars Episode III: Revenge of the Sith where they were played primarily by Temuera Morrison. In the two Clone Wars animated TV shows, they are voiced by Andre Sogliuzzo and Dee Bradley Baker. Clone troopers comprised the bulk of the Army of the Republic during the Clone Wars. They are depicted as the main part of the armed forces of the Galactic Republic in its final years, becoming one of the largest armies ever assembled, only surpassed by the Separatist Droid Army. Nearing the end of the clone wars, they were ordered to slay the Jedi. This famous Jedi purge was known as ‘Order 66’. After the Clone Wars, they served as the nucleus for the armed forces of the Galactic Empire, eventually becoming the Imperial Stormtroopers. Source: Wikipedia REQUIRED ITEMS 1. Black Undersuit One or two piece black undersuit. Commonly used components include sports comression wear, warm-up suits, dance unitards, or diveskins. Undersuit must be smooth in appearance or with vertical ribbing with no labels or logos visible once the armor is on. 2. Black Gloves Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin. 3. Neck Seal Neck seal to be black in color with vertical ribbing or being smooth in appearance. No logos or labels are to be visible. If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable. 4. Helmet Episode III (Phase II) style Clone Helmet – Fanmade helmet. Some “name brand” helmets may be unacceptable. Visor – mirrored/chrome or black visor 9 blue or black vent stripes on each side of cheek tubes Helmet frown is charcoal grey in color. Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown. Grey stripe around back of dome. 5. Armor  Chest – Two detail slots on right breast. Chest and back plate should match together at the sides with no gap, just a seam line. Back – Chest and back plate should match together at the sides with no gap, just a seam line. Shoulders Shoulder Straps – Correct shape with ridges. Upper Arms – Front/back pieces are seamless. Forearms – Front/back pieces are seamless. Elbows – Two detail slots on the outside area of both elbow pieces. Elbow Straps Handplates AB plate – Four 1/4″ diameter holes per side on indents of ab plate, eight holes total. Kidney/Lower Back Piece Butt Plate Cod piece Upper thighs – Front/back pieces are seamless. Knees – Detail clip with slots on each side of both knees. Knee Straps – Correct shape with center portion of both knee straps raised and primer grey. Lower Legs – Front/back pieces are seamless on outside seam as minimum requirement. Compad on Right forearm Note: – All armor should be matte white or satin white (NO GLOSS). – Armor does not have to be weathered. If weathering is preferred, black wash is an example of an acceptable weathering technique. – No obvious, visible rivets. 6. Belt...

    read more

    Clone Trooper, Episode II Soldier (Phase I)

    Clone Trooper, Episode II Soldier (Phase I)

    CHARACTER DESCRIPTION The clone troopers of the Grand Army of the Republic are soldiers in the Star Wars universe, cloned from Jango Fett, a Mandalorian bounty hunter. They first appeared in Star Wars Episode II: Attack of the Clones, and returned in Star Wars Episode III: Revenge of the Sith where they were played primarily by Temuera Morrison. In the two Clone Wars animated TV shows, they are voiced by Andre Sogliuzzo and Dee Bradley Baker. Clone troopers comprised the bulk of the Army of the Republic during the Clone Wars. They are depicted as the main part of the armed forces of the Galactic Republic in its final years, becoming one of the largest armies ever assembled, only surpassed by the Separatist Droid Army. Nearing the end of the clone wars, they were ordered to slay the Jedi. This famous Jedi purge was known as ‘Order 66’. After the Clone Wars, they served as the nucleus for the armed forces of the Galactic Empire, eventually becoming the Imperial Stormtroopers. Source: Wikipedia REQUIRED ITEMS 1. Black Undersuit One or two piece black undersuit. Commonly used components include sports comression wear, warm-up suits, dance unitards, or diveskins. Undersuit must be smooth in appearance or with vertical ribbing with no labels or logos visible once the armor is on. 2. Black Gloves Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin. 3. Neck Seal Neck seal to be black in color with vertical ribbing or being smooth in appearance. No logos or labels are to be visible. If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable. 4. Helmet Episode 2 style Clone Helmet – Fanmade bucket. Some “name brand” helmets may be unacceptable. Visor – Mirrored/Chrome or Black Visor Helmet Fin on dome Rear fin needs a brake light cover installed. 6 Primer Grey Vents on each side of helmet cheeks Helmet frown is charcoal grey in color. Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown. Primer grey stripe around back of dome. Ear holes may be painted light grey or remain white. 5. Armor  Chest – Two detail slots on right breast. Chest and back plate should match together at the sides with no gap, just a seam line. Back – Chest and back plate should match together at the sides with no gap, just a seam line. Shoulders Shoulder Straps – Correct shape with ridges. Upper Arms – Front/back pieces are seamless. Forearms – Front/back pieces are seamless. Elbows – Two detail slots on the outside area of both elbow pieces. Elbow Straps Handplates AB plate – Four 1/4″ diameter holes per side on indents of ab plate, eight holes total. Kidney/Lower Back Piece Butt Plate Cod piece Upper thighs – Front/back pieces are seamless. Knees – Detail clip with slots on each side of both knees. Knee Straps – Correct shape with center portion of both knee straps raised and primer grey. Lower Legs – Front/back pieces are seamless on outside seam as minimum requirement. Compad on Right forearm Note: – All armor should be matte white or satin white (NO GLOSS). – Armor does not have to...

    read more

    Clone Pilots (Episode III)

    Clone Pilots (Episode III)

    CHARACTER DESCRIPTION Clone trooper pilots were special clone troopers bred in the Kamino cloning centers for the purpose of piloting craft of the Grand Army of the Republic and the early Galactic Empire. They first appeared at the Battle of Geonosis,where they flew LAAT/i and LAAT/c gunships. Pilots also operated CR20 and CR25 troop carriers. In addition, they flew starfighters such as the V-19 Torrent, ARC-170, and Alpha-3 Nimbus-class V-wing. The pilots who flew capital ships wore a special type of armor instead of the regular one, seen in the First Battle of Mon Calamari, during the Clone Wars. Pilots also knew how to operate all military land vehicles such as the AT-TEs. Source: Wookiepedia REQUIRED ITEMS 1. Grey flightsuit with Old Republic patches   2. White hard chest armour front and back connected with black nylon webbing, and 2 shoulder plates   3. Chest box   4. Grey hoses from chest box to helmet   5. White ARC-170 helmet   6. White boots   7. White gauntlet type gloves   8. White belt  COSTUME RESOURCES CloneTroopers.Net PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Clone Pilots (Episode II)

    Clone Pilots (Episode II)

    CHARACTER DESCRIPTION Clone trooper pilots were special clone troopers bred in the Kamino cloning centers for the purpose of piloting craft of the Grand Army of the Republic and the early Galactic Empire. They first appeared at the Battle of Geonosis,where they flew LAAT/i and LAAT/c gunships. Pilots also operated CR20 and CR25 troop carriers. In addition, they flew starfighters such as the V-19 Torrent, ARC-170, and Alpha-3 Nimbus-class V-wing. The pilots who flew capital ships wore a special type of armor instead of the regular one, seen in the First Battle of Mon Calamari, during the Clone Wars. Pilots also knew how to operate all military land vehicles such as the AT-TEs. Source: Wookiepedia REQUIRED ITEMS 1. Complete clone armour 2. Modified clone helmet with chest box attached to helmet by 2 hoses 3. Yellow detail paint 4. Black undersuit with high collar or neck seal COSTUME RESOURCES CloneTroopers.Net PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Clone Officer

    Clone Officer

    CHARACTER DESCRIPTION Clone naval officers also known as clone navigators were clone troopers specifically trained in technical and tactical aspects of naval command. Kaminoan scientists speculated that clones’ aptitude for space combat came from Jango Fett’s understanding of dogfight tactics, but even amongst his clones some had proved themselves capable of understanding and executing naval strategy to a greater degree than their brothers. Those clones received special naval training and many of them eventually became officers in the Republic Navy, although most of them were lower-tier commanders and aides to superior non-clone officers. Some of those officers believed that despite their training the clones were not suited for a role of an officer, which sometimes led to rising tensions aboard Galactic Republic ships. Although Grand Army of the Republic soldiers such as Rom Mohc had a high opinion of clones and relished working with them, others decided to avoid following Mohc’s kindness. As a result, these naval officers had tense relationships with officers. Source: Wookiepedia REQUIRED ITEMS Gray long sleeve jacket (needs to extend below the waist down to hips, and be made from a good quality suiting material.) Epaulets on both shoulders Mandarin-style Collar with closure on the right side “S” seam on front of jacket (extending from bottom on L side; rising to mid chest and curving 90 degrees to the R; across chest then curving 90 degrees to vertical; then rising to the L shoulder epaulet) 2 stripes on jacket cuff Black belt w/ rectangle silver buckle. Rank insignia on L breast Pants in matching fabric Black boots rising to just below the knee Short clone hair style only (long hair will not be accepted) RECOMMENDED Dark piping to outline the “S” seam on the jacket front Split skirt on back of jacket  Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Clone Commander, Deviss

    Clone Commander, Deviss

    CHARACTER DESCRIPTION CT-65/91-6210, also known as “Deviss,” was a clone trooper captain who led K Company, a unit within Clone Commander Bly’s 327th Star Corps. In 22 BBY, Deviss served in the the first battle of the Clone Wars on the Outer Rim planet Geonosis. During the battle, Deviss risked his life to protect two injured soldiers from Confederate spider droids and received a medal after being rescued from behind enemy lines by Republic troops. He went on to fight in the Battle of Altyr V, after which he was promoted to commander for his actions. He also participated in a battle on Cato Neimoidia. In 19 BBY, Deviss was dispatched to support Jedi General Nem Bees on Orto. During a battle on the planet, the Commander received Order 66—which called for all clone troopers to execute their Jedi officers—and personally shot down Bees on the front lines. Source: Wookiepedia REQUIRED ITEMS NOTE: This clone wears Phase II (Episode III) armor with additional paint and accessories. Only those additional items are listed here. 1. Helmet Binoc set mounted to the helmet Red stripe down the center, starting in the rear above the grey band and tapering slightly toward the chin (mohawk is left white) 2. Armor Chest – Red stripe down the center Shoulders – Red stripe down the center Upper Arms – Red stripe on the outside of the bicep, located slightly more toward the front Forearms – Red stripe on upper/outside, Shape of compad is painted on left forearm Handplates – Red stripes down center Knees – Red stripes down center 3. Belt 2 red stripes on the center-most raised rectangular details 4. Boots 2 Red stripes. One on the boot strap and one just below the strap 5. Pauldron Episode III style pauldron One large shoulder plate approximately the width of the helmet and painted red One black smaller shoulder plate approximately the same width as the distance from the neck and outer line of the armor at the shoulder Mantle (or base) should be black 6. Ammo Boxes 3 ammo boxes are attached to a grey strap that is attached to the pauldron (on the opposite side of the large shoulder plate) and runs down to the belt. Outer area of boxes is white. Inner portion is raw sienna with a black square located towards the top. 2 smaller ammo boxes are attached to the bicep (opposite the large shoulder plate) on a grey strap. One box is located on the front of the bicep and the other is located on the outside. Outer area of boxes is white. Inner portion is raw sienna. 7. Kama Taupe and rectangular shaped with 4 inch “V” cut in bottom/center Straps are white and attached to kama buckle with clips and are stitched to the inside of the kama 8. Kama buckle Buckle is located under the front/center of the belt. Kama straps are attached to the buckle with clips 9. Pistols and Holsters One holster on each hip, hanging from the belt 2 DC-17 Pistols (see photo reference) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Clone Commander, Bly

    Clone Commander, Bly

    CHARACTER DESCRIPTION CC-5052 was a clone marshal commander who served both the Galactic Republic and the Galactic Empire that followed. A clone of Jango Fett, CC-5052 was bred on Kamino, where he was trained as an Advanced Recon Commando by Alpha-17. Alpha-17 also gave CC-5052 the name “Bly,” which the clone commander himself adopted. Assigned to the 327th Star Corps, Bly worked with Jedi General Aayla Secura throughout the Clone Wars. Serving in campaigns on planets such as Quell, Maridun, Alzoc III, Florrum, and New Holstice, Bly worked with Secura to personally extract a valuable Scientific Instrument Package from Honoghr. During the mission, Bly encountered renegade Jedi Quinlan Vos, whom he deeply mistrusted. Shortly after the Honoghr mission, Bly and Secura served alongside the reformed Vos in the Siege of Saleucami. Source: Wookiepedia REQUIRED ITEMS NOTE: This clone wears Phase II (Episode III) armor with additional paint and accessories. Only those additional items are listed here. 1. Helmet Binoc set mounted to the helmet Yellow mohawk and lower portion of helmet Sandy brown stripe down the center, starting in the rear above the grey band and tapering slightly toward the chin 2. Armor  Chest – Sandy brown stripe down the center  Shoulders – Sandy brown stripe down the center  Upper Arms – Sandy brown stripe on the outside of the bicep, located slightly more toward the front  Forearms – Sandy brown stripe on upper/outside, shape of compad is left white on left forearm  Handplates – Sandy brown stripe down center  Thighs – Yellow with sandy brown stripe down front/center  Knees – Sandy brown stripes down center 3. Belt Large/front boxes and belt in between are painted yellow 4. Boots 2 Yellow stripes. One on the boot strap and one just below the strap 5. Pauldron Episode III style pauldron One large shoulder plate approximately the width of the helmet and painted in a brown/sienna color One black smaller shoulder plate approximately the same width as the distance from the neck and outer line of the armor at the shoulder Mantle (or base) should be black 6. Ammo Boxes 3 ammo boxes are attached to a grey strap that is attached to the pauldron (on the opposite side of the large shoulder plate) and runs down to the belt. Outer area of boxes is white. Inner portion is raw sienna with a black square located towards the top. 2 smaller ammo boxes are attached to the bicep (opposite the large shoulder plate) on a grey strap. One box is located on the front of the bicep and the other is located on the outside. Outer area of boxes is white. Inner portion is raw sienna. 7. Kama Taupe and rectangular shaped with 4 inch “V” cut in bottom/center Straps are white and attached to kama buckle with clips and are stitched to the inside of the kama 8. Kama buckle Buckle is located under the front/center of the belt. Kama straps are attached to the buckle with clips 9. Pistols and Holsters One holster on each hip, hanging from the belt 2 DC-17 Pistols (see photo reference)   Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Clone Commander, Bly (Animated)

    Clone Commander, Bly (Animated)

    CHARACTER DESCRIPTION CC-5052 was a clone marshal commander who served both the Galactic Republic and the Galactic Empire that followed. A clone of Jango Fett, CC-5052 was bred on Kamino, where he was trained as an Advanced Recon Commando by Alpha-17. Alpha-17 also gave CC-5052 the name “Bly,” which the clone commander himself adopted. Assigned to the 327th Star Corps, Bly worked with Jedi General Aayla Secura throughout the Clone Wars. Serving in campaigns on planets such as Quell, Maridun, Alzoc III, Florrum, and New Holstice, Bly worked with Secura to personally extract a valuable Scientific Instrument Package from Honoghr. During the mission, Bly encountered renegade Jedi Quinlan Vos, whom he deeply mistrusted. Shortly after the Honoghr mission, Bly and Secura served alongside the reformed Vos in the Siege of Saleucami. Source: Wookipedia REQUIRED ITEMS 1. Black Undersuit One or two piece black undersuit. Commonly used components include sports compression wear, warm-up suits, dance unitards, or diveskins. Undersuit must be smooth in appearance or with vertical ribbing with no labels or logos visible once the armor is on. 2. Black Gloves Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin. 3. Neck Seal Neck seal to be black in color with vertical ribbing or being smooth in appearance. No logos or labels are to be visible. If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable. 4. Helmet The Clone Wars animated style clone helmet – Fanmade bucket. Some “name brand” helmets may be unacceptable. Helmet Fin on dome painted Golden Yellow. Golden Yellow stripe down center, tapering slightly toward the “chin” and upwards just past the helmet fin. Primer grey rear detail Macro binoculars (animated style) mounted to “ear” area. Smoked/black visor over entire opening on face of helmet 4 black vents on each side of helmet. NOTE: Episode II style helmets are not acceptable 5. Armor  Chest – Chest and back plate should match together at the sides with no gap, just a seam line. Golden Yellow strip down center.  Back – Chest and back plate should match together at the sides with no gap, just a seam line.  Shoulders – Golden Yellow stripes centered on shoulders  Shoulder Straps – Correct shape with ridges. Golden Yellow stripes  Upper Arms – Front/back pieces are seamless. Golden Yellow stripes  Forearms – Front/back pieces are seamless. Golden Yellow stripes on Forearm  Handplates – Golden Yellow stripes  AB plate  Kidney/Lower Back Piece  Butt Plate  Cod piece  Upper thighs – Front/back pieces are seamless. Golden Yellow in color w/ Sandy Brown strip down the center  Lower Legs – Sandy Brown stripes on knees  Compad on left forearm 6. Clone Trooper boots White shoes with white soles Strap across top of foot with circular detail pieces at each end Proper toe detail No laces or logos 2 Golden Yellow stripes. One on the boot strap (but not the circular detail) and one just below the strap 7. Belt The Clone Wars style belt Segmented (or segmented-look) belt One large belt box, opposite each other, on hips Thermal detonator centered on rear of belt 8. Kama Heavy weight fabric, leather, or leather-like material, dark brown, with gold trim Length should be to the bottom of the...

    read more

    Captain Rex (realistic)

    Captain Rex (realistic)

    CHARACTER DESCRIPTION CT-7567, nicknamed “Rex,” was a clone trooper captain during the Clone Wars, the galaxy-wide conflict between the Galactic Republic and the Confederacy of Independent Systems. Rex was in command of Torrent Company, a unit of the famed 501st Legion in the Grand Army of the Republic. Rex served under Jedi General Anakin Skywalker, and was a freethinking, tough, and aggressive trooper. Though loyal and committed to his duty and to his fellow clones, Rex proved capable of questioning his superiors and, under extreme circumstances, outright disobeying orders if he believed them to be wrong. Rex displayed a strong working relationship and a degree of friendship with Commander Cody. Rex was one of the many clones of bounty hunter Jango Fett, bred on Kamino by the Galactic Republic to fight in the Republic’s clone army. The soldiers were bred to fight against the separatist planetary and sectorial governments seeking to leave the Republic, known as Confederacy of Independent Systems, in the coming war. Rex served on Geonosis alongside Denal and was promoted to the rank of captain, he was also in command of Torrent Company, a unit in the famous 501st Legion. Rex was assigned to Jedi General Anakin Skywalker, and would participate in many missions alongside the Jedi Knight, including Jabiim. Rex also developed a friendship with fellow clone trooper Commander Cody. Source: Wookiepedia REQUIRED ITEMS NOTE: This clone wears Phase I (Episode II) armor with additional paint and accessories. Only additional additonal features are listed here. 1. Helmet Blue eyes and triangles on forehead Blue visor trim, rear detail, and 2 vertical ribs back of helmet Yellow “kill stripes”, 4 on each side of the forehead Rangefinder (Boba/Jango Fett style) mounted on right/outsdie of helmet and painted white Black or charcoal grey frown Smoked/black visor (mirrored acceptable) NOTE: Rubies helmet is not acceptable 2. Armor  Shoulders – Blue stripe down the center  Upper Arms – Blue stripe on the outside of the bicep, located slightly more toward the front  Elbows – Blue stripe centered on elbow plate  Forearms – Rank stripe on upper/outside  Hand Plates – Rank stripes down center  Knees -Blue stripe down center 3. Pauldron (black, grey, and blue) Similar to Episode III style Shoulder plate is no longer than helmet is wide Mantle plates painted grey Left shoulder plate details painted blue 4. Kama Black with blue trim Length should be to the bottom of the thigh armor Split up the back all the way to the belt Spacing in the front should place the edges of the kama at roughly the outside corners of the bottom of the codpiece 5. Pistols and Holsters One holster on each hip, hanging from the belt 2 DC-17 Pistols OPTIONAL Weathering – HIGHLY RECOMMENDED – Color should be heavy on the greys, with little/no browns Other clone weapons – Rex is shown with just about all of the accepted Clone weapons at some point in the movie/series Jango Fett “Arena” style jetpack – Seen when he follows Anakin into battle with the droids The Clone Wars movie NOTE: Standard Jango Fett color scheme is NOT acceptable.   Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Captain Rex, Phase 1

    Captain Rex, Phase 1

    CHARACTER DESCRIPTION CT-7567, nicknamed “Rex,” was a clone trooper captain during the Clone Wars, the galaxy-wide conflict between the Galactic Republic and the Confederacy of Independent Systems. Rex was in command of Torrent Company, a unit of the famed 501st Legion in the Grand Army of the Republic. Rex served under Jedi General Anakin Skywalker, and was a freethinking, tough, and aggressive trooper. Though loyal and committed to his duty and to his fellow clones, Rex proved capable of questioning his superiors and, under extreme circumstances, outright disobeying orders if he believed them to be wrong. Rex displayed a strong working relationship and a degree of friendship with Commander Cody. Rex was one of the many clones of bounty hunter Jango Fett, bred on Kamino by the Galactic Republic to fight in the Republic’s clone army. The soldiers were bred to fight against the separatist planetary and sectorial governments seeking to leave the Republic, known as Confederacy of Independent Systems, in the coming war. Rex served on Geonosis alongside Denal and was promoted to the rank of captain, he was also in command of Torrent Company, a unit in the famous 501st Legion. Rex was assigned to Jedi General Anakin Skywalker, and would participate in many missions alongside the Jedi Knight, including Jabiim. Rex also developed a friendship with fellow clone trooper Commander Cody. Source: Wookiepedia REQUIRED ITEMS 1. Black Undersuit One or two piece black undersuit. Commonly used components include sports compression wear, warm-up suits, dance unitards, or diveskins. Undersuit must be smooth in appearance or with vertical ribbing with no labels or logos visible once the armor is on. 2. Black Gloves Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin. 3. Neck Seal Neck seal to be black in color with vertical ribbing or being smooth in appearance. No logos or labels are to be visible. If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable. 4. Helmet The Clone Wars animated style clone helmet – Fanmade helmet. Visor – Black visor covers entire “T” shape and frown Helmet Fin on dome 4 black vents on each side of helmet Blue jaig eyes on forehead Blue visor trim and rear detail Yellow “kill stripes”, 4 on each side of the forehead Rangefinder (animated style) mounted on right/outside of helmet Smoked/black visor over entire opening on face of helmet NOTE: Episode II style helmets are not acceptable 5. Armor Chest and back plate should match together at the sides with no gap, just a seam line. Shoulders – Blue stripes centered on shoulders Shoulder Straps – Correct shape with ridges. Upper Arms – Front/back pieces are seamless. Blue stripes on outside of biceps Forearms – Front/back pieces are seamless. Blue stripes on elbows and forearms Handplates AB plate Kidney/Lower Back Piece Butt Plate Cod piece Upper thighs – Front/back pieces are seamless. Lower Legs – Blue stripes centered on knees Compad on left forearm 6. Clone Trooper boots White shoes with white soles Strap across top of foot with circular detail pieces at each end Proper toe detail No laces or logos 7. Belt The Clone Wars style belt Segmented (or segmented-look) belt One...

    read more

    Endor Commando/ Rebel Soldier/ Trooper

    Endor Commando/ Rebel Soldier/ Trooper

    CHARACTER DESCRIPTION Endor Commando/Endor Rebel Soldier/Endor Trooper – These troopers accompanied Han Solo, Leia and Chewbacca to the forest moon of Endor in order to destroy the shield generator that was protecting the second Death Star thereby allowing the Rebel Fleet to destroy it. The troopers were caught in a trap set forth by the Emperor but managed to overcome the odds and complete the mission.   REQUIRED ITEMS 1. Cargo style pants – (commercial BDU in rip stop or twill is acceptable-no sewing modifications needed) spray painted in a camouflage pattern A NOTE REGARDING CAMO FOR ALL PIECES CALLING FOR CAMOUFLAGE: Suggested paint colors below are “Design Master Corp” paint designations, an equivalent is acceptable- Moss Green (heavy) – Holiday Green (light) – Hunter Green (light) – Basil (heavy…primary color) – Bright Olive – (small accents) 2. A beige/tan/sand coloured long sleeve t-shirt  3. Boots: “Desert” style combat or hiking boots. Canvas/Natural upper Target Color: “Sand” FS 33531/RAL 1011 “Brown Beige”; Molded sole, with thick “lug” tread. The sole continues up over the front ½”/12mm of the toe. The original “Sierra” brand boots are long out of production; however there are Israeli Scout Commando Boots that are very close in design and can be either purchased or used as a reference. 4. Gaiters:  A tube of heavy Cotton/Natural fabric starting from the bridge of the foot (covering most of the laces) continuing up past the boot top to slightly below mid-calf. 5-8 sets of eyelets (depending on your measurements). No clear photos of the laces have been found yet; most likely surplus olive-green “para-cord” was used. Color: The originals appear to have been made from a tan or sand material, but were so heavily dyed and painted to appear used they look dark brown or olive when actually seen on screen. 5. Helmet: Consisting of an AN-H-15 cloth helmet (or replica) with a ribbed strip on the top, a replica rigid outer ring, and cloth bill 6. Olive Drab Belt with pouches  7. Short, light-colored leather work gloves  8. The following combinations are acceptable for formal for the upper torso in addition to the tan long sleeved shirt: A camo painted trenchcoat – camo paint should be applied to a tan trenchcoat, if tan trenchcoat/lab coat can not be obtained, you will have to dye trenchcoat/labcoat tan first and then camo paint. A camo painted snow jacket – camo paint must be applied to a tan base. Since snow jackets are by nature white in color, you must dye jacket tan first. Accurate capped sleeve vest with slash pockets and padded applique on right upper chest. Accurate capped sleeve vest with slash pockets and padded applique on right upper chest worn over a camo painted snow jacket. 9.Formal Requirements – choose one: (Unless local laws prohibit or strongly discourage carrying anything that looks like a firearm)  E-11  DH-17  Endor rifle Optional Items: 1. Web bandolier with replica accessories 2. Canvas military-style backpack-no nylon packs-screen accurate is two pocket pack. 3. Endor hardpack 4. Vest accessories such as rank badges and wrist comm. Resources: Studio Creations Endor Rebel Soldier Tutorial Sunrider Base Endor Trooper Forum Endor Bunker Yahoo! Group Build Your Own Endor Commando PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges...

    read more

    Endor Gunner

    Endor Gunner

      CHARACTER DESCRIPTION Endor Gunner – These gunners accompanied Han Solo, Leia and Chewbacca to the forest moon of Endor in order to destroy the shield generator that was protecting the second Death Star thereby allowing the Rebel Fleet to destroy it. The gunners were caught in a trap set forth by the Emperor but managed to overcome the odds and complete the mission.   REQUIRED ITEMS 1. Gray or tan jumpsuit with 4 leg pockets in front and a tabbed closure collar and tabbed closure on sleeves. OR Gray jumpsuit with regular buttoned up pointed collar and 4 leg pockets in front.  2. Olive drab military style canvas/strapping belt  3. At least 2 olive drab pouches  4. Endor capped sleeved vest with quilted portion on upper right and slash pockets.  5. Rank badge  6. short gloves (tan, brown, or deerskin)  7. Tan gaiters with a seam down the front, siver strapping at top, and small black triangle to the inner part of gaiters.  8. Black round toe boots or shoes  OPTIONAL ITEMS 1. Headset 2. Weathering on capped sleeved vest 3. Endor headgear   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Yavin Honor Guard (Ep IV)

    Yavin Honor Guard (Ep IV)

      CHARACTER DESCRIPTION Rebel Honor Guard was the ceremonial guard of the Rebel Alliance during the Galactic Civil War. It comprised former Blue Guards of the defunct Old Republic’s Senate, and several survivors of the destruction of Alderaan by the Galactic Empire. (Source: Wookiepedia)   REQUIRED ITEMS 1. Accurate helmet with visor down 2. Army-green button down tunic with pockets 3. Army-green pants 4. Dark grey or olive drab belt 5. Black boots or black shoes OPTIONAL ITEM 1. Staff/Pike Resources: SWTroopers Rebel Honor Guard PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Yavin Hanger Technician (Ep IV)

    Yavin Hanger Technician (Ep IV)

      CHARACTER DESCRIPTIONS Yavin Hangar Technicians played an important role in the battle against the evil Empire. The technicians ensured that the fighters and their droids were in full working order allowing the rebel pilots to destroy the first Death Star.   REQUIRED ITEMS 1. Helmet: Accurate tech helmet (RFT helmet with no swoop on back) Helmet can be white or light gray and can have either a white/light gray or black com box. 2. Flightsuit: Light tan or light gray coverall with mandarin-style collar and pointed tab, rectangular pocket with a flap closure on upper right arm, 2 hip pockets and 4 leg pockets. No visible zippers or snaps. This is the same flightsuit as the Pilots wear and pockets should be the same. Pants can be hemmed or cuffed. 3. Belt: dark khaki, khaki green, British Khaki, Olive, Olive drab or dark tan with a roll pin buckle. Belt should have mini-flare loops that can be empty or contain the mini-flares. 4. Boots/shoes: Black boots or black shoes with rounded toe and smooth finish. OPTIONAL ITEMS 1. Antenna on comm box on helmet. 2. Mini flares may be worn in belt loops. A mix of empty and filled slots is allowed.   COSTUME RESOURCES   RAID forum   Revised on January 3, 2015.   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Hoth Hanger Technician (Ep V)

    Hoth Hanger Technician (Ep V)

      CHARACTER DESCRIPTION   Hoth Hanger Technicians had an important role to play in the battle of Hoth. The technicians oversaw the shield generator the Rebel Alliance defence against any incoming Imperial attacks. They also helped maintain the Ion cannon used to take out a Star Destroyer and assisted in launching the Rebel Fleet off of the Hoth Planet when the Empire overran the Rebel defences.   REQUIRED ITEMS 1. Technician cold weather hat Very similar to a US Navy foul weather deck hat. Tan, light brown, ecru, khaki would be acceptable 2. The vest is several shades darker than the coveralls. The vest is quilted, front and back, from the bottom to the middle of the arm hole with large diamond quilts. It has a large padded ring shaped collar, and closes in front with no visible fasteners. It extends 2-3” below the natural belt line and is level from front to back with no dips or cuts. Two large un-quilted patch pockets with flaps are on the front. There is a window on the front left breast for a rank badge (only when the vest rank badge is worn). * See formal requirements below. 3. Light tan coverall or pants/ shirt combination with mandarin-style collar and pointed tab, rectangular pocket with a flap closure on upper right arm, 2 upper thigh crescent pockets and 4 leg pockets. No visible zippers or snaps. This is the same flightsuit as the Pilots wear and pockets should be the same. If pants are used they must be modified accordingly with no visible logos, hip pockets, belt loops, etc. A shirt must also be modified accordingly to match references. A Pants/ Shirt combination must match to appear to be a one piece uniform 4. Black mid-calf Jackboots may be worn. Real or replica jackboots are encouraged but motorcycle boots with round toe and conservative heel are permitted. No ornamentation, or ankle straps permitted. Black zippers are permitted if they cannot be seen when viewed from the front 5. TIG welding gloves or other white glove with long grey leather cuff. The left glove typically has a comm device. Light weathering is permitted Technician Formal Requirements: **Choose two or more. ** 1. Rank Badge window on vest left breast, with Hoth rank badge. 2. Rank badge on right arm consistent with screen images 3. Snowspeeder type Comm Device on the left glove gauntlet OPTIONAL ITEMS 1. Spanner 2. Code cylinders in pocket on left arm. No more than four Resources: Rebel Troopers Forum Ice Station Echo Yahoo! Group Updated 8 June 2016 by RAID members PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Hoth Hanger Trooper (Ep V)

    Hoth Hanger Trooper  (Ep V)

      CHARACTER DESCRIPTION   A Hoth Rebel Trooper is an infantry unit equipped with special gear who fought for the rebellion on the ice planet Hoth. These units are not specifically trained to work in snow, being regular Rebel troopers equipped with snow gear.   REQUIRED ITEMS 1. Trooper soft helmet: Accurately detailed soft helmet in light tan, khaki, white, or ecru consistent with screen images. Helmet includes white framed goggles with amber or yellow-green lenses. Comm device on the left earpiece is optional, see below. Tan , brown or black scarf tied around soft helmet. 2. Quilted vest with padded collar: The vest is several shades darker than the coveralls. The vest is quilted, front and back, from the bottom to the middle of the arm hole with large diamond quilts. It has a large padded ring shaped collar, and closes in front with no visible fasteners. It extends 2-3” below the natural belt line and is level from front to back with no dips or cuts. Two large un-quilted patch pockets with flaps are on the front. There is a window on the front left breast for a rank badge (only when the vest rank badge is worn). 3. Flightsuit: Light tan coverall or pants/ shirt combination with mandarin-style collar and pointed tab, rectangular pocket with a flap closure on upper right arm, 2 upper thigh crescent pockets and 4 leg pockets. No visible zippers or snaps. This is the same flightsuit as the Pilots wear and pockets should be the same. If pants are used they must be modified accordingly with no visible logos, hip pockets, belt loops, etc. A shirt must also be modified accordingly to match references. A Pants/ Shirt combination must match to appear to be a one piece uniform. 4. Jackboots or snow moccasins: Black mid-calf Jackboots may be worn. Real or replica jackboots are encouraged but motorcycle boots with round toe and conservative heel are permitted. No ornamentation, or ankle straps permitted. Black zippers are permitted if they cannot be seen when viewed from the front. Some Hangar Troopers are seen wearing snow moccasins. Snow Moccasins will be consistent with the Trench Trooper Moccasin. 5. Gauntlet Gloves: TIG welding gloves or other white glove with long grey leather cuff. The left glove typically has a comm device. Light weathering is permitted. FORMAL REQUIREMENTS 1. Comm device with antenna on soft helmet left earpiece. May be medium grey to black. 2. Rank Badge window on vest left breast, with Hoth rank badge. 3. Rank badge on right arm consistent with screen images. 4. Block type OR Snowspeeder type Comm Device on the left glove gauntlet Resources: Rebel Trooper Forum Ice Station Echo Yahoo! Group Updated 8 June 2016 by RAID members PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Hoth Trench Trooper (Ep V)

    Hoth Trench Trooper (Ep V)

      CHARACTER DESCRIPTION   Hoth Trench Troopers featured in Empire Strikes back and could be seen trying to hold off the oncoming attack of Imperial forces whilst the Rebel fleet attempted to evacuate the Ice Planet Hoth.   REQUIRED ITEMS 1. Accurate soft helmet in a white, beige or ecru colour 2. White framed goggles with with yellow or light amber lenses 3. Jacket in white or beige/natural colour with tan quilted top section 4. Backpack Vest in a beige or ecru colour 5. Tan coloured pants with quilted/padded knees 6. Accurate grey or tan coloured gaiters 7. White web belt with buckle detail 8. Greeblies on right front vest 9. White/Light grey gloves with med grey cuff and com device FORMAL REQUIREMENTS – CHOOSE TWO 1. Rank badge on vest 2.  Comm device/earpiece on hat 3. DH-17 blaster Either RFT version or modified Hoth version) 4. White holster 5. Hoth Rifle 6. Backpack/Hardpack Canvas covered boxes with black greeblies on a frame 7. Tan fabric pouch 8. Tan or black scarf PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Rebel Fleet Trooper (Ep IV)

    Rebel Fleet Trooper (Ep IV)

    CHARACTER DESCRIPTION Rebel troopers (also known as Rebel soldiers and Rebel infantry) were standard foot soldiers employed by the Alliance to Restore the Republic. After the Declaration of a New Republic in 5 ABY, most Rebel troopers were organized into regular units of the New Republic Army. (Source: Wookiepedia) REQUIRED ITEMS 1. Accurate Fleet Trooper helmet Can have white or black “visor”. Visor can also be dark smoke glass that can be put in the down position to cover wearers face. A comm pad on the helmet is required. An antenna is not required, but permitted. 2. Long-sleeve blue work shirt with bib in front (blue Chambray or blue Oxford recommended Bib should cover front of shirt with no gaps at the bottom). Shirt bib should come all the way up to the collar button and not sag. No button down collars (with visible button holes on collar). Colour range from a light blue to medium blue (costume can be denied if shirt colour is deemed too dark blue). 3. Black, collarless vest with 4 standard BDU pockets on the front and no visible buttons or ornamentation of any kind Proper pocket configuration can be seen below in optional items. 4. Light Grey pants with large cargo pockets Charcoal or dark grey are not permitted 5. Boots: Mid-calf black boots (Jack boots or engineer boots are acceptable) Leather pull-on style preferred with low heels. No laces or ankle buckles. No non-black zippers. Any zipper closure must either be hidden or on the inside calf. No zippers on front or outside calf of boots. High-Calf boots are acceptable with sufficient blousing of the pants legs. No rubber boots. 6. Belt and buckle Solid leather or vinyl – no holes or decorations. Belt width should be 1 3/4 to 2″ wide in canyon or range tan colour 2″ buckle can be rectangular, octagonal or oval. FORMAL REQUIREMENTS – CHOOSE THREE ITEMS 1. DH-17 blaster Unless local laws prohibit or strongly discourage carrying anything that looks like a firearm 2. Pike weapon 3. Two (2) aluminium/silver belt boxes proportional to wearer  4. Large open pocket on the upper back of the vest with a center Velcro closure. Proportional to wearer and should go almost from armhole to armhole 5. Strip of 4 pockets along the bottom hem of the vest approx. 5″ tall 6. Accurate front pocket layout consisting of long and narrow upper right pocket with tab closure and left upper pocket should be smaller than bottom two pockets 7. Antenna on helmet comm box  OPTIONAL ITEMS 1. Accurate Holster  2. Rank Badge  COSTUME RESOURCES Studio Creations Rebel Fleet Trooper Tutorial SWTroopers Rebel Fleet Trooper 1Tutorial Sunrider Base Rebel Fleet Trooper Tutorial Echo Base Rebel Fleet Trooper Helmet Tutorial Echo Base DH-17 Blaster Tutorial TK-560 DH-17 Blaster Tutorial Blaster Builders Club’s DH-17 Blaster Tutorial Rebel Fleet Trooper Yahoo Group Sunrider Base’s Rebel Fleet Trooper forum PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start...

    read more

    Baron/Colonel Fel

    Baron/Colonel Fel

      CHARACTER DESCRIPTION Baron Fel  – Shot down from the bloody skies of Brentaal, Baron Soontir Fel has been captured by the Rebel Alliance. But from the shadowed recesses of a Rebel interrogation chamber, The Empire’s greatest fighter ace tells a story of the deception and corruption beneath the Empire’s orderly surface… and sets the stage for his own defection to the Alliance! (Source: Wookiepedia) REQUIRED ITEMS 1. Black flightsuit in standard TIE/X-wing pilot style Mandarin-style collar and pointed tab Code cylinder pocket on upper-middle left arm Rectangular pocket with a flap closure on upper-middle right arm Comm pad pocket on outside of left forearm above wrist Thigh pockets (upper set required, lower set optional) No visible zippers or snaps Flight suit must have red stripe running from where shoulder meets collar to wrist, and armpit to ankle on both sides 2. Mid-calf black boots (Jack boots or engineer boots are acceptable) Leather pull-on style preferred with low heels No laces No ankle buckles (small buckle at top edge of boot allowable if covered by blousing) No non-black zippers. Any zipper closure must either be hidden or on the inside calf No zippers on front or outside calf of boots (High-Calf boots are acceptable with sufficient blousing of the flighsuit legs.) 3. Silver/grey leg flares in an olive drab or black leg-band holder Maximum of 8 flares per holder Flares should be approximately 4″ long 4. Light grey/silver grey ejection harness and web belt, all 2” wide 5. White or light grey flak vest with accurate ribbing and claps ANH & ROTJ versions should be sure to have the gap in ribbing on the upper chest ESB Snowspeeder version is worn backwards Vest sizing should be proportional to the wearer 6. Accurately sized grey chest box with accurate decoration (raised buttons (acrylic preferred, see the Pilot Forums for acceptable button colour schemes) Separated rocker switches Appropriate material greebles, pin stripes etc 1″ – 1.75″ diameter grey hose or aviation hose should attach at the left-bottom of the chestbox and connect to the suit in some screen-accurate manner (tucked up into the flak vest, attached to flightsuit, etc.) (Please note that Costumebase chestboxes will not pass the standards unmodified, however once slightly modified, they will meet standards.) 7. Metallic silver Code Cylinders (Arm Tools) in left shoulder pocket. Two minimum; four maximum Cylinder heads showing should resemble screen accurate representations 8. Black gauntlet-style gloves (flared leather or pleather preferred, cloth or rubber gloves will not meet standards) 9. Accurate Comm Pad (size, details, 3-dimensional, colouration, etc.) visible in the correct comm pad pocket on outside left forearm above wrist. (May be either the white X-wing version or the black TIE version.)  10. Hair must be black/colored black and combed back in “widow’s peak” style haircut  11. Facial hair cut in “goatee” style or a consistent “five o’clock shadow.” FORMAL REQUIREMENTS – YOU NEED AT LEAST ONE 1. X-Wing helmet with Baron Fel style decoration 2. Mini-flares on belt – a mix of filled and empty slots are okay 3. Accurate belt buckle on web belt PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your...

    read more

    B-Wing pilot (Episode VI)

    B-Wing pilot (Episode VI)

    B Wing Pilot: a pilot, sometimes called a flyboy, directly controlled the operation of a vehicle while located within the same craft. A pilot was often assisted by a copilot, navigator, astromech droid, weapons officer, or other crew members.

    read more

    A-Wing pilot (Episode VI)

    A-Wing pilot (Episode VI)

      CHARACTER DESCRIPTION A Wing Pilot – a pilot, sometimes called a flyboy, directly controlled the operation of a vehicle while located within the same craft. A pilot was often assisted by a copilot, navigator, astromech droid, weapons officer, or other crew members. The term “pilot” was applied across vehicles used on land or in water, air, and/or space. The military designation for a pilot was PL-1. Whether this applied to all pilots or only starfighter pilots is unknown. On smaller ships, the word pilot and captain were interchangeable, but on larger vessels, the pilots were rarely the commanders of the vessels. (Source: Wookiepedia) REQUIRED ITEMS 1. Spruce/Hunter Green flightsuit (no Kelly/Olive Drab/Grass Green) with mandarin-style collar (with squared tab) or same tabbed collar under another flipped up collar Correct arm pockets (shaped code cylinder pocket on upper left arm Rectangular pocket with a squared-flap closure on upper right arm), and thigh pockets with squared-flap closures (upper set required, lower set optional) No visible zippers or snaps 2. Light Tan, Beige, or Taupe cloth or canvas spats over black boots Leather spats are not acceptable Spat height should be mid-calf to just under the knee and fall all the way down Spats should feature an additional strap (w/no buckle) of the same or similar material, running around the length around the calf approximately 1/8-1/4 down from the top of the spat Spats may feature single or double seam running down the front or back No laces should be visible 3. Boots should be mid-calf black boots (Jack boots or engineer boots are acceptable Leather pull-on style preferred with low heels No laces No ankle buckles (small buckle at top edge of boot allowable if covered by blousing) No non-black zippers. Any zipper closure must either be hidden or on the inside calf No zippers on front or outside calf of boots High-Calf and Low-Calf boots are acceptable if fully covered by the spats 4. White ejection harness and web belt, all 2” wide Belt may be off-white and is to buckle at the front or back with a black snap-release buckle Leg loops are individual per leg and split at the waist. Belt is worn over the harness 5. Accurately styled scoop-necked charcoal/dark grey cloth or canvas flak vest with smaller white front section bib applied over it White section should have appropriate ribbing- one above chestbox, 2 below (separated from each other by a gap). This is NOT a duplicate of the X-wing vest Small black plastic snap-release buckles on the shoulder straps Side strapping should be white and 1.5″ – 2″ wide Shoulder strapping should match front and back panel material Back panel is smaller and differently shaped than the front but should match front panel material 6. Accurately styled black upper chest box with accurate ribbing details and black straps 7. Accurately shaped white lower chest box (hard or soft) with white cloth-covered hose coming out of the bottom and connecting to flightsuit. This box should be directly under the upper box, with no gap between. 8. Black gauntlet-style gloves (flared leather or pleather preferred, cloth or rubber gloves will not meet standards) FORMAL REQUIREMENTS – YOU MUST HAVE AT LEAST ONE 1. A-Wing hard helmet with Star Wars-style decoration 2. Cloth tan AN-H-15 flight helmet (or...

    read more

    Y-Wing pilot (Episode VI)

    Y-Wing pilot (Episode VI)

      CHARACTER DESCRIPTION Y Wing Pilot – A pilot, sometimes called a flyboy, directly controlled the operation of a vehicle while located within the same craft. A pilot was often assisted by a copilot, navigator, astromech droid, weapons officer, or other crew members. The term “pilot” was applied across vehicles used on land or in water, air, and/or space. The military designation for a pilot was PL-1. Whether this applied to all pilots or only starfighter pilots is unknown. On smaller ships, the word pilot and captain were interchangeable, but on larger vessels, the pilots were rarely the commanders of the vessels. (Source: Wookiepedia) REQUIRED ITEMS 1. Grey/Light Grey flightsuit with either a mandarin-style collar (with pointed tab) or the same tab under another flipped up collar Correct arm pockets (shaped code cylinder pocket on upper left arm Rectangular pocket with a squared-flap closure on upper right arm) Thigh pockets with squared-flap closures (upper set required, lower set optional) No visible zippers or snaps 2. Light Tan, Beige, or Taupe cloth or canvas spats over black boots Leather spats are not acceptable Spat height should be mid-calf to just under the knee and fall all the way down Spats should feature an additional strap (w/no buckle) of the same or similar material, running around the length around the calf approximately 1/8-1/4 down from the top of the spat Spats may feature single or double seam running down the front or back No laces should be visible 3. Boots should be mid-calf black boots (Jack boots or engineer boots are acceptable) Leather pull-on style preferred with low heels No laces No ankle buckles (small buckle at top edge of boot allowable if covered by blousing) No non-black zippers Any zipper closure must either be hidden or on the inside calf No zippers on front or outside calf of boots High-Calf and Low-Calf boots are acceptable if fully covered by the spats 4. White ejection harness and web belt, all 2” wide Belt may be off-white and is to buckle at the back with a black snap-release buckle Leg loops are individual per leg and split at the waist Belt is worn over the harness 5. Accurately styled scoop-necked light grey/beige flak cloth or canvas vest with appropriate chest ribbing Shoulder ribbing and small black plastic snap-release buckles on the shoulder straps Side strapping should be white and 1.5″ – 2″ wide Shoulder strapping should match front and back panel material Back panel is smaller and differently shaped than the front but should match front panel material 6. Small black/dark grey rectangular chest box on the upper chest Left side has wide, raised, lined section running vertically 7. White oval belly box/tube with black strap and white cloth-covered hose attached at two points (either belly tube to flak vest, belly tube to flightsuit, or flak vest to flightsuit) 8. Black gauntlet-style gloves (flared leather or pleather preferred, cloth or rubber gloves will not meet standards) FORMAL REQUIREMENTS – YOU MUST HAVE AT LEAST ONE 1. Y-Wing helmet with Star Wars-style decoration 2. Mini-flares on web belt – a mix of filled and empty slots are okay 3. Accurate Comm Pad (size, details, 3-dimensional, colouration, etc.) visible in the correct comm pad pocket on outside left forearm above wrist OPTIONAL REQUIREMENT 1. Metallic silver Code...

    read more

    Snowspeeder pilot (Episode V)

    Snowspeeder pilot (Episode V)

      CHARACTER DESCRIPTION A pilot, sometimes called a flyboy, directly controlled the operation of a vehicle while located within the same craft. A pilot was often assisted by a copilot, navigator, astromech droid, weapons officer, or other crew members. The term “pilot” was applied across vehicles used on land or in water, air, and/or space. The military designation for a pilot was PL-1. Whether this applied to all pilots or only starfighter pilots is unknown. On smaller ships, the word pilot and captain were interchangeable, but on larger vessels, the pilots were rarely the commanders of the vessels. (Source: Wookiepedia) REQUIRED ITEMS 1. Orange flightsuit with mandarin-style collar and pointed tab Code cylinder pocket on upper-middle left arm Rectangular pocket with a flap closure on upper-middle right arm Comm pad pocket on outside of left forearm above wrist Thigh pockets (upper set required, lower set optional) No visible zippers or snaps 2. Orange flight jacket with padded collar and ribbed strips down both arms 3. Tan/grey Hoth-style boots and gaiters with accurate movie-style strapping or mid-calf black boots Jack boots or engineer boots are acceptable Leather pull-on style preferred with low heels No laces No ankle buckles (small buckle at top edge of boot allowable if covered by blousing) No non-black zippers Any zipper closure must either be hidden or on the inside calf No zippers on front or outside calf of boots High-Calf boots are acceptable with sufficient blousing of the flighsuit legs 4. Silver/grey leg flares in an olive drab or black leg-band holder  Maximum of 8 flares per holder Flares should be approximately 4″ long 5. Light grey/silver grey ejection harness and web belt, all 2” wide 6. White flak vest with accurate ribbing and clasps ESB Snowspeeder version is worn backwards Vest sizing should be proportional to the wearer 7. Accurately sized grey chest box with accurate decoration. Raised buttons (acrylic preferred, see the Pilot Forums for acceptable button color schemes) Separated rocker switches Appropriate material greebles, pin stripes etc.) 1″ – 1.75″ diameter grey hose or aviation hose should attach at the left-bottom of the chestbox and connect to the suit in some screen-accurate manner (tucked up into the flak vest, attached to flightsuit, etc.). (Please note that Costumebase chestboxes will not pass the standards unmodified, however once slightly modified, they will meet standards.) 8. White and grey gauntlet-style gloves FORMAL REQUIREMENTS – YOU MUST HAVE AT LEAST ONE 1. X-Wing helmet with Star Wars-style decoration 2. Tan or Beige balaclava or cloth-covered soft helmet, no brim. (design similar, but not exact to the AN-H-15 or British RAF versions) 3. Badge in jacket chest pocket along with comm pad on left gauntlet above wrist 4. Mini-flares on belt. A mix of filled and empty slots are okay 5. Accurate belt buckle on web belt COSTUME RESOURCES Alderaan Base X-Wing Pilot Tutorial Richie’s Armor X-Wing Helmet Tutorial Parts of Star Wars Luke X-Wing Pilot page Parts of Star Wars X-Wing Pilot page PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build...

    read more

    X-Wing pilot (Ep IV; VI), Y-Wing pilot (Ep IV)

    X-Wing pilot (Ep IV; VI), Y-Wing pilot (Ep IV)

      CHARACTER DESCRIPTION X Wing Pilot – A pilot, sometimes called a flyboy, directly controlled the operation of a vehicle while located within the same craft. A pilot was often assisted by a copilot, navigator, astromech droid, weapons officer, or other crew members. The term “pilot” was applied across vehicles used on land or in water, air, and/or space. The military designation for a pilot was PL-1. Whether this applied to all pilots or only starfighter pilots is unknown. On smaller ships, the word pilot and captain were interchangeable, but on larger vessels, the pilots were rarely the commanders of the vessels. (Source: Wookiepedia) REQUIRED ITEMS 1. Orange flightsuit  Code cylinder pocket on outside of upper-middle left arm  Rectangular pocket with a flap closure on upper-middle right arm. Flap should be rectangular shaped  Comm pad pocket on outside of left forearm above wrist  Thigh pockets with rectangular flap closures (upper set required, lower set optional)  No visible zippers or snaps.  Mandarin-style with pointed tab closure. Collar closes from left to right with the exposed tab on the right side of the throat Cuffs should close in a similar fashion as the Mandarin-style collar 2. Mid-calf black boots (Jack boots or engineer boots are acceptable)  Leather pull-on style preferred with low heels  Boots should be largely unadorned. No laces or ankle buckles (small buckle at top edge of boot allowable if covered by blousing)  No non-black zippers. Any zipper closure must either be hidden or on the inside of the boot (that is, front and outside zippers are not permitted)  High-Calf boots are acceptable with sufficient blousing of the flightsuit legs 3. Silver/grey leg flares in an olive drab or black leg-band holder  Maximum of 8 flares per holder  Flares and flare holder should be approximately 4″ (inches) long Metal leg flares are preferred, but other materials are permitted as long as, when finished, give the appearance of being silver metallic in appearance Leg flares should be spaced equidistant around the leg Leg flares can be worn on either leg and should be positioned to so the bottom edge of the leg flare is resting on the top of the boot (that is, no gap between the flare holder and the top of the boot) 4. Light grey/silver grey ejection harness and web belt Harness and belt are made of strapping material that is 2” (inches) wide Front and back straps extend up the torso under the flack vest and are secured to either the flightsuit or to the inside the flak vest panels. Attachment must be hidden by the flak vest. The lower part of the harness should fall (or loop) just below the inseam (or crotch area) Two loops of strapping are connected to the front-back strapping (at the lowest part of the front-back loop) and loop around each leg, drooping no lower than the knees The belt is worn over the front/back harness strap and is closed with a silver/gray “cargo slide” (or roll pin) style buckle. The free end of the belt is looped around the slide so that the excess belt is on the underneath/inside of the belt, not on top/outside of the belt. The right side of the belt contains 6 (six) vertical loops for mini-flares. Mini-flares are made of metal or other materials that, when...

    read more

    Naboo N-1 Pilot (Episode II)

    Naboo N-1 Pilot (Episode II)

      CHARACTER DESCRIPTION A pilot, sometimes called a flyboy, directly controlled the operation of a vehicle while located within the same craft. A pilot was often assisted by a copilot, navigator, astromech droid, weapons officer, or other crew members. The term “pilot” was applied across vehicles used on land or in water, air, and/or space. The military designation for a pilot was PL-1. Whether this applied to all pilots or only starfighter pilots is unknown. On smaller ships, the word pilot and captain were interchangeable, but on larger vessels, the pilots were rarely the commanders of the vessels. (Source: Wookiepedia)   REQUIRED ITEMS 1. Medium reddish brown or dark tan long sleeve suede or moleskin overshirt 2. Orangish red sueded cloth pants with no visible pockets 3. Black cloth ribbed neck seal that can be just a “dickie” or attached to undershirt 4. Charcoal grey/greyish teal leather or pleather V neck vest that is longer in the back with side closure and double line piping 5. Brown belt with leather buckle and silver or brass square inset and 2 belt pouches, one on each side 6. Brown knee-high boots with Naboo-style strapping spats (like Padme’s Battle Outfit) 7. Medium reddish brown or dark tan leather gloves 8. Dark brown leather or leather-like bracer’s/gauntlets with double line piping OPTIONAL ITEMS 1. Naboo N-1 flight helmet(with full faceshield) 2. Accurately-styled Naboo fighter pilot blaster attached to belt via covertec clip PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Naboo N-1 Pilot (Episode I)

    Naboo N-1 Pilot (Episode I)

      CHARACTER DESCRIPTION A pilot, sometimes called a flyboy, directly controlled the operation of a vehicle while located within the same craft. A pilot was often assisted by a copilot, navigator, astromech droid, weapons officer, or other crew members. The term “pilot” was applied across vehicles used on land or in water, air, and/or space. The military designation for a pilot was PL-1. Whether this applied to all pilots or only starfighter pilots is unknown. On smaller ships, the word pilot and captain were interchangeable, but on larger vessels, the pilots were rarely the commanders of the vessels. (Source: Wookiepedia) REQUIRED ITEMS 1. Burgundy or reddish-brown undershirt Mandarin-style collar seams attach in front – can be worn either open or closed up the neck No exposed closure 2. Suede or suede-like light orange or natural buff coloured underjacket with large fly-away collar Hem length should hit at upper thigh level  No exposed closures (snaps, buttons, etc.) 3. Dark orange/pumpkin outer-jacket made of a heavy-weight or sueded material with large cuffs The underjacket lapels should show on top Outer jacket has large, diagonal exterior (or mock-exterior) pockets with a squared-flap Pockets are located at hip or upper thigh level 4. Burgundy or reddish-brown pants. Colour should be a close match to the undershirt 5. Medium to dark brown leather gloves. Close fitting, with short cuffs (not gauntlets) 6. Dark brown leather belt & harness with appropriate pouches and straps 7. Low-heeled medium to dark brown boots with matching-colour Naboo-style strapping pattern/spats (like Padme’s Battle Outfit) OPTIONAL ITEMS 1. Naboo N-1 flight helmet (with goggles attached preferred, but optional)  COSTUME RESOURCES Parts of Star Wars Naboo N-1 Pilot page PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Tantive IV Crew (Revenge of the Sith)

    Tantive IV Crew (Revenge of the Sith)

    CHARACTER DESCRIPTION The crew worked aboard the Tantive IV CR90 corvette in the service of the Royal House of Alderaan. Corla Metonae was the Chief Petty Officer on the CR90 corvette Tantive IV. In service to the royal house of her homeworld of Alderaan, Metonae, a member of the House of Antilles, served aboard the Tantive IV under her uncle, Captain Raymus Antilles, during the early years of the Galactic Empire. (Source Wookieepedia)   REQUIRED ITEMS: 1. Blue-grey jumpsuit (or pants and long sleeve shirt) without pockets. 2. Sleeves and legs have a light blue stripe along the outside. 3. Blue-grey waist length stiff tabard rounded on the bottom front and back. Shoulders extend to or just past the trooper’s shoulders. Light blue border that matches pants/sleeve stripes & is about 1-2″ inside edge. 4. Wide blue-grey or grey cummerbund or belt that fastens in back. 5. Dark boots. 6. Silvery metallic Y-shaped headpiece. 7. Silvery comm bracer on one forearm. FORMAL REQUIREMENTS: 1. A blaster, unless local laws prohibit or strongly discourage carrying anything that looks like a firearm. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Captain Colton Raymus Antilles

    Captain Colton Raymus Antilles

    CHARACTER DESCRIPTION Raymus Antilles was a male Human and the captain of the Corvette Sundered Heart at the time of the Clone Wars and the Galactic Civil War. He served the Royal Alderaan Civil Fleet under Senator Bail Prestor Organa. During the early stages of the Civil War, he served the Rebel Alliance in the fight against the Galactic Empire. He captained the Alderaan Diplomatic Cruiser Tantive IV before his death in 0 BBY at the hands of Darth Vader.  (Source Wookieepedia)   REQUIRED ITEMS Blue-grey jumpsuit (or pants and longsleeve shirt) without pockets. Light blue waist-length stiff tabard rounded on the bottom front and back. Wide border that matches pants/jumpsuit. Wide dark grey cummerbund or belt that fastens in back Dark boots Dark grey/olive drab ankle-length cloak Silvery metallic Y-shaped headpiece Silvery comm bracer on one forearm.   FORMAL REQUIREMENTS A blaster and holster, unless local laws prohibit or strongly discourage carrying anything that looks like a firearm. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Naboo Security Officer (Episode II)

    Naboo Security Officer (Episode II)

      CHARACTER DESCRIPTION Security Officers were the highest ranking group within the Royal Naboo Security Forces. Unfamiliar to true danger, they led the part-time and volunteer members of the security forces. Among their ranks is the captain of Security. They roughly numbered over 1,000 before the Clone Wars. They wore a maroon leather jerkin with a blue officers uniform underneath, and their weapon of choice was the S-5 heavy blaster pistol. (Source Wookieepedia) REQUIRED ITEMS: Mid-thigh length wool or wool-like sky blue coat with a stiff collar and a flaired bottom that forms an inverted V in the front. Coat can have 0, 1 or 2 red stripes but no more than 2 along the bottom. Dark sky blue pants. Pants should be darker than the coat. Knee high black leather or leather like boots Black leather or leather like belt with two silver buckles in a rectangular shape that is larger on one side and has waves in it Burgundy leather or leather like jerkin with edging. Jerkin is longer in the front and stops at the waist in the back. Burgundy arm gauntlets Burgundy leather or leather like gloves Burgundy military dress style cap with leather or leather like burgundy strap across top gold metallic band with Naboo symbol on front Naboo Blaster Covertec clip COSTUME RESOURCES: Naboo Security Officer page Assembled Naboo Security Officers with different ranks. Naboo Military Naboo Security Officers cap Naboo Blaster  Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Naboo Security Officer (Episode I)

    Naboo Security Officer (Episode I)

      CHARACTER DESCRIPTION The Royal Naboo Security Forces were the premier line of defense for both the Theed Royal Palace and the citizens of Naboo. A peaceful people, the Naboo retained only security officers and guards, rather than a true military organization. (Source Wookieepedia) REQUIRED ITEMS: Mid-thigh length wool or wool-like sky blue coat with a stiff collar and a flaired bottom that forms an inverted V in the front. Coat can have 0, 1 or 2 red stripes but no more than 2 along the bottom. Dark sky blue pants. Pants should be darker than the coat. Knee high black leather or leather like boots Black leather or leather like belt with two silver buckles in a rectangular shape that is larger on one side and has waves in it Burgundy leather or leather like jerkin with edging. Jerkin is longer in the front and stops at the waist in the back. Burgundy arm gauntlets Burgundy leather or leather like gloves Burgundy military dress style cap with leather or leather like flap on back, leather or leather like burgundy strap across top and gold metallic band with Naboo symbol on front Naboo Blaster Covertec clip Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Captain Panaka

    Captain Panaka

      CHARACTER DESCRIPTION Panaka was a Human male who served as the head of the Royal Naboo Security Forces before, during, and after the Invasion of Naboo. Notoriously conservative, Panaka often clashed with the Jedi Master Qui-Gon Jinn during the Invasion of Naboo, deriding the Jedi’s controversial methods and retaining the utmost faith in his own. Nevertheless, with Jinn’s help he was able to get his chance at military action, in the Second Battle of Theed. (Source Wookieepedia) REQUIRED ITEMS: Mid-thigh length wool or wool-like sky blue coat with a stiff collar and a flaired bottom that forms an inverted V in the front with 2 red stripes along bottom of coat. Dark sky blue pants. Pants should be darker than the coat. Knee high black leather or leather like boots Black leather or leather like belt with two silver buckles in a rectangular shape that is larger on one side and has waves in it Burgundy leather or leather like jerkin with edging. Jerkin is longer in the front and stops at the waist in the back. Burgundy arm gauntlets Burgundy leather or leather like gloves Burgundy military dress style cap with leather or leather like flap on back, leather or leather like burgundy strap across top and gold metallic band with Naboo symbol on front Naboo Blaster Covertec clip COSTUME RESOURCES: Parts of Star Wars Captain Panaka page  Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Admiral Wullf Yularen – The Clone Wars

    Admiral Wullf Yularen – The Clone Wars

      CHARACTER DESCRIPTION Wullf Yularen was a male Human who had a long history of service in both the Galactic Republic and the Galactic Empire. During the Clone Wars, Yularen was persuaded by Palpatine to join the Republic Navy as an admiral—becoming one of the youngest naval officers to hold the rank—and the naval commander of Jedi General Anakin Skywalker’s fleet. Yularen was aboard the Death Star when it was attacked by the Rebel Alliance, and he perished when Rebel pilot Luke Skywalker successfully destroyed the station. (Source Wookieepedia)   REQUIRED ITEMS: Olive Drab (OD) long sleeve jacket (needs to extend below the waist down to hips, and be made from a good quality suiting material.) Epaulets on both shoulders Mandarin-style Collar with closure on the right side “S” seam on front of jacket (extending from bottom on L side; rising to mid chest and curving 90 degrees to the R; across chest then curving 90 degrees to vertical; then rising to the L shoulder epaulet) 2 dark green stripes (aprox .25″) spaced .5″ apart on both sleeves just above the cuff Black belt w/ rectangle silver buckle. (buckle needs to have imperial style greeblie placed in the center) Black gloves Rank insignia on L breast (3 red squares on top row & 2 blue squares on bottom row centered) Pants in matching fabric Black boots rising to just below the knee (boots need to have the top folded over on itself) Short hair style only (long hair will not be accepted) RECOMMENDED BUT NOT REQUIRED: Dark piping to outline the “S” seam on the jacket front Split skirt on back of jacket Thin mustache Silver stud on belt placed on R side of buckle NOTE: The jacket is supposed to similar to the ones worn at the end of ROTS, but without the flared trousers or cap. COSTUME RESOURCES: The Clone Wars TV Series Wookipedia: http://starwars.wikia.com/wiki/Wullf_Yularen Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    General Carlist Riekeen / Echo Base Commanders

    General Carlist Riekeen / Echo Base Commanders

    CHARACTER DESCRIPTION Carlist Rieekan was an Alderaanian general who, throughout his life, served the Galactic Republic, the Alliance to Restore the Republic, the Alliance of Free Planets, the New Republic, and the Galactic Federation of Free Alliances. He joined the Republic’s Judicial Forces at the age of seventeen before serving in the Army of the Republic during the Clone Wars. With the advent of Supreme Chancellor Palpatine’s ascension to Emperor and the installment of the Galactic Empire in 19 BBY, Rieekan immediately rejected the new regime. Instead, he chose to serve the Royal House of Alderaan as a civilian tactician, before becoming one of the founding members of the Alliance to Restore the Republic, a rebellion against the rule of the Emperor. (Source Wookieepedia) REQUIRED ITEMS: Gray Hoth style gaitered boots. Tan pants, no distinguising marks and no visible pockets. Light tan jacket with high standing and batted collar, quilted yoke in a darker tan. Two breast pockets with red or rust colored piping and tab closure. Mid-thigh in length (possibly quilted like that of a Hoth Trench Trooper). Velcro closure all the way down the front. Two large cargo pockets below the waist. Belt loop on each side and two in the back. Tan overtunic with pocketed sleeves. light gray with a darker gray gauntlet with comlink. Medium brown belt with octagonal buckle. REQUIRED FOR FORMAL: Rank badge, 5 red discs on metal. OPTION FOR GENERIC OFFICERS: Hoth Hat with goggles and ear communicator Rank badge, appropriate discs on metal   Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Rebel Officer (Episode VI)

    Rebel Officer (Episode VI)

      CHARACTER DESCRIPTION An officer of the Alliance who was present at the pre-Battle of Endor briefing on Home One.   (Source Wookieepedia)   REQUIRED ITEMS: Black Boots Tan slacks Light blue long sleeved collared shirt (a US Air Force dress shirt is perfect) Tan overtunic with pocketed sleeves Brown belt with octagonal belt buckle   REQUIRED FOR FORMAL: Rank badge and collar insignia Black or dark brown gauntlets Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Captain Antilles (Episode IV)

    Captain Antilles (Episode IV)

      CHARACTER DESCRIPTION Raymus Antilles was a male Human and the captain of the Corvette Sundered Heart at the time of the Clone Wars and the Galactic Civil War. He served the Royal Alderaan Civil Fleet under Senator Bail Prestor Organa. During the early stages of the Civil War, he served the Rebel Alliance in the fight against the Galactic Empire. He captained the Alderaan Diplomatic Cruiser Tantive IV before his death in 0 BBY at the hands of Darth Vader. (Source Wookieepedia) REQUIRED ITEMS: Accurate khaki/tan jacket with brown shoulders (yoke) and four pockets in front Dark brown shirt with bib in front Khaki/tan pants with solid dark brown or black stripe on side of each leg Brown belt with oval buckle Accurate Rebel Fleet Trooper helmet Brown tall boots (14-16 inch shaft), riding boots recommended REQUIRED FOR FORMAL: Rank badge Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    General Crix Madine

    General Crix Madine

      CHARACTER DESCRIPTION Crix Madine was an Imperial Army officer who formed and led the notorious Storm commandos of the Imperial military. In light of later missions, such as releasing a plague on Dentaal, Madine defected to the Rebel Alliance. After several complications in his defection, Madine became a valuable part of the Rebellion, advising and leading commando operations. He also planned the successful commando raid on the second Death Star’s shield generator. After the Battle of Endor, Madine continued to serve in the New Republic. (Source Wookieepedia) REQUIRED ITEMS: Black Boots Tan slacks Light blue long sleeved collared shirt (a US Air Force dress shirt is perfect) Tan overtunic with pocketed sleeves Black or dark brown gauntlets Brown belt with octagonal belt buckle REQUIRED FOR FORMAL: Rank badge and collar insignia Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Admiral Ackbar

    Admiral Ackbar

      CHARACTER DESCRIPTION Gial Ackbar was a male Mon Calamari who became the foremost military commander of the Alliance to Restore the Republic and its successor government the New Republic. (Source Wookieepedia)   REQUIRED ITEMS: Reddish-brown Ackbar mask Reddish-brown Ackbar hands White jumpsuit (or shirt and pants) with yellow stripe on each side Plain white shoes Cream-colored vest with round collar Rank insignia Cream-colored belt with boxes/pouches Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Generic Wookiee

    Generic Wookiee

      CHARACTER DESCRIPTION A race of towering, hairy bipeds, the Wookiees were one of the most recognizable species in the galaxy. They were renowned for their great strength, their intelligence, their loyalty and their short temper.  Due to their appearance, they were sometimes referred to as “walking carpets”.  (Source Wookieepedia) REQUIRED ITEMS: 1. Complete hair suit using natural or synthetic fibers. Hair should be natural colors such as brown, blond, auburn, black, grey, or white. Hair should average at least 6 inches or longer, but 8-10 inch long hair is preferred. Complete coverage is required; no bald spots or exposed skin/undersuit. 2. Faux fur is not allowed unless hair extensions have been added. No yarn or shag carpet Wookiees. The hair must maintain a consistent quality/type throughout the suit. 3. Dark brown, gray, or black gloves should be worn. There should be enough overlap between the gloves and the wrists of the hair suit that no skin is exposed. Gloves may be made of leather, vinyl, cloth, or rubber. 4. When worn, the feet must be completely covered with hair except for the bottom and the toes. The toes and toenails/claws must be visible. 5. The mask must completely cover the head and neck, without completely obscuring the shape of the shoulders. The eyes, a smooth black nose, and a large jaw/muzzle should all be clearly visible. A slight mustache like feature should be present as well. 6. The mask hair should be smooth and well groomed, not bushy, so that the mask’s shape and structure are clear. Beards, mustaches, dreadlocks and other features are encouraged. 7. Static masks should not be frozen in a fully opened position. All static mouths should be closed. 8. Although a functioning jaw and/or lip snarl is not required, the skin and lips of any mechanical masks should appear as one piece, rather than a separated jaw and and face. This refers only to the mask’s outward appearance, not the underskull. Costumers should be aware that mechanical jaws and lips are complex projects requiring purpose-built components using special materials. They cannot simply be added to an existing latex rubber mask. Consult the costuming resources and fellow Wookiee costumers for advice on this project. FORMAL REQUIREMENTS: For formal status, you must be at least 7 feet tall while in costume. Lifts, stilts, and other height-enhancing footwear can achieve this. COSTUME RESOURCES: Chewbacca Costuming Resources Wookiee Costuming Yahoo Group Making Wookiee  Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Tarfful

    Tarfful

      CHARACTER DESCRIPTION Tarfful was a male Wookiee Chieftain of Kachirho who was an old friend of Chewbacca and fought in the Battle of Kashyyyk during the Clone Wars, at least until the battle ended during the start of the Great Jedi Purge.  During the battle in 19 BBY, he had good relations with Yoda and was behind him for the entirety of the battle.  Tarfful, while not a general, carefully planned out the placement of troops and warriors with Jedi Masters Luminara Unduli and Quinlan Vos.  (Source Wookieepedia) REQUIRED ITEMS: 1. Complete hair suit using natural or synthetic fibers. Most of the hair should be a dark-brown color. The outsides of the knees, the belly, the middle of the chest, and the inside of the arms should be a light brown/blonde. Hair should average at least 6 inches or longer, but 8-10 inch long hair is preferred. Complete coverage is required; no bald spots or exposed skin/undersuit. 2. Faux fur is not allowed unless hair extensions have been added. No yarn or shag carpet Wookiees. The hair must maintain a consistent quality/type throughout the suit. 3. Dark brown leather or faux leather harness with a Y-shaped, a V-shaped back, and a belt around the waist. The strap should be approximately 3 inches wide with a narrow center strap, with large metallic boxes and small metallic boxes spaced evenly along the straps with the narrow center strap going over the boxes. The boxes should have edge detailing. Decorative buckles should be present on the fork in the front “Y”, at the base of the “Y” where it connects with the belt, and along the back where it connects to the belt. 4. Decorated shoulder armor with three plates should be worn. 5. Dark brown, gray, or black gloves should be worn. There should be enough overlap between the gloves and the wrists of the hair suit that no skin is exposed. Gloves may be made of leather, vinyl, cloth, or rubber. 6. When worn, the feet must be completely covered with hair except for the bottom and the toes. The toes and toenails/claws must be visible. 7. The mask must completely cover the head and neck, without completely obscuring the shape of the shoulders. The eyes, a smooth black nose, and a large jaw/muzzle should all be clearly visible. A slight mustache like feature should be present as well. The mouth should have a slight frown when closed. The mask hair should be smooth and well groomed, not bushy, so that the mask’s shape and structure are clear. The chin should feature a slightly “beard” on the chin. The face, eye brows, and beard should be light brown. The rest of the mask should be dark brown. 8. Nine or ten dreadlocks should be attached to the top of the back of the head. Four should hang down the front (two on each side) to about the bottom of the ribcage. The remaining dreadlocks should hang down to the lower back. Three decorative silver bands should be present on each lock. 9. Static masks should not be frozen in a fully opened position. All static mouths should be closed. 10. Although a functioning jaw and/or lip snarl is not required, the skin and lips of any mechanical masks should...

    read more

    Chewbacca (Revenge of the Sith)

    Chewbacca (Revenge of the Sith)

      CHARACTER DESCRIPTION Chewbacca (or “Chewie”, as he was known by his friends) was a legendary Wookiee from Kashyyyk and co-pilot of Han Solo’s ship, the Millennium Falcon.  He was the son of Attichitcuk, the husband of Mallatobuck, and the father of Lumpawaroo. (Source Wookieepedia) REQUIRED ITEMS: 1. Complete hair suit using natural or synthetic fibers. Most of the hair should be a medium-brown color. The outsides of the knees, the shoulders, the upper back, and the back of the head should be a dark brown, gray, or a mix. Hair should average at least 6 inches or longer, but 8-10 inch long hair is preferred. Complete coverage is required; no bald spots or exposed skin/undersuit. 2. Faux fur is not allowed unless hair extensions have been added. No yarn or shag carpet Wookiees. The hair must maintain a consistent quality/type throughout the suit. 3. Dark brown leather or faux leather bandolier, approximately 3 inches wide with a narrow center strap, with 8 or 9 large metallic boxes and 8 or 9 small metallic boxes spaced evenly along the bandolier with the narrow center strap going over the boxes. The boxes should have edge detailing. The ends of the bandolier should be tapered and attach to a medium-sized leather or suede pouch with a large flap cover. The bandolier should hang from the left shoulder across the torso with the pouch resting on the right thigh. No leather concho should be present as it is on some of the original trilogy bandoliers. 4. Dark brown, gray, or black gloves should be worn. There should be enough overlap between the gloves and the wrists of the hair suit that no skin is exposed. Gloves may be made of leather, vinyl, cloth, or rubber. 5. When worn, the feet must be completely covered with hair except for the bottom and the toes. The toes and toenails/claws must be visible. 6. The mask must completely cover the head and neck, without completely obscuring the shape of the shoulders. The eyes, a smooth black nose, and a large jaw/muzzle should all be clearly visible. A slight mustache like feature should be present as well. The mouth should have a slight frown when closed. The mask hair should be smooth and well groomed, not bushy, so that the mask’s shape and structure are clear. 7. Static masks should not be frozen in a fully opened position. All static mouths should be closed. 8. Although a functioning jaw and/or lip snarl is not required, the skin and lips of any mechanical masks should appear as one piece, rather than a separated jaw and and face. This refers only to the mask’s outward appearance, not the underskull. Costumers should be aware that mechanical jaws and lips are complex projects requiring purpose-built components using special materials. They cannot simply be added to an existing latex rubber mask. Consult the costuming resources and fellow Wookiee costumers for advice on this project. FORMAL REQUIREMENTS: For formal status, you must be at least 7 feet tall while in costume.  Lifts, stilts, and other height-enhancing footwear can achieve this. COSTUME RESOURCES: Chewbacca Costuming Resources Wookiee Costuming Yahoo Group Making Wookiee  Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Chewbacca (Classic Trilogy)

    Chewbacca (Classic Trilogy)

      CHARACTER DESCRIPTION Chewbacca (or “Chewie”, as he was known by his friends) was a legendary Wookiee from Kashyyyk and co-pilot of Han Solo’s ship, the Millennium Falcon. He was the son of Attichitcuk, the husband of Mallatobuck, and the father of Lumpawaroo. (Source Wookieepedia) REQUIRED ITEMS: 1. Complete hair suit using natural or synthetic fibers. Most of the hair should be a medium-brown color. The outsides of the knees, the shoulders, the upper back, and the back of the head should be a dark brown, gray, or a mix. Hair should average at least 6 inches or longer, but 8-10 inch long hair is preferred. Complete coverage is required; no bald spots or exposed skin/undersuit. 2. Faux fur is not allowed unless hair extensions have been added. No yarn or shag carpet Wookiees. The hair must maintain a consistent quality/type throughout the suit. 3. Dark brown leather or faux leather bandolier, approximately 3 inches wide with a narrow center strap, with 8 or 9 smooth large metallic boxes and 8 or 9 smooth small metallic boxes spaced evenly along the bandolier with the narrow center strap going over the boxes. The ends of the bandolier should be tapered and attach to a medium-sized leather or suede pouch with a large flap cover. The bandolier should hang from the left shoulder across the torso with the pouch resting on the right thigh. 4. Dark brown, gray, or black gloves should be worn. There should be enough overlap between the gloves and the wrists of the hair suit that no skin is exposed. Gloves may be made of leather, vinyl, cloth, or rubber. 5. When worn, the feet must be completely covered with hair except for the bottom and the toes. The toes and toenails/claws must be visible. 6. The mask must completely cover the head and neck, without completely obscuring the shape of the shoulders. The eyes, a smooth black nose, and a large jaw/muzzle should all be clearly visible. A slight mustache like feature should be present as well. The mask hair should be smooth and well groomed, not bushy, so that the mask’s shape and structure are clear. 7. Static masks should not be frozen in a fully opened position. All static mouths should be closed. 8. Although a functioning jaw and/or lip snarl is not required, the skin and lips of any mechanical masks should appear as one piece, rather than a separated jaw and and face. This refers only to the mask’s outward appearance, not the underskull. Costumers should be aware that mechanical jaws and lips are complex projects requiring purpose-built components using special materials. They cannot simply be added to an existing latex rubber mask. Consult the costuming resources and fellow Wookiee costumers for advice on this project. FORMAL REQUIREMENTS: For formal status, you must be at least 7 feet tall while in costume. Lifts, stilts, and other height-enhancing footwear can achieve this. COSTUME RESOURCES: Chewbacca Costuming Resources Wookiee Costuming Yahoo Group Making Wookiee  Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Han Solo (Hoth Gear)

    Han Solo (Hoth Gear)

      CHARACTER DESCRIPTION Han Solo was a Human smuggler from Corellia who achieved galactic fame as a member of the Rebel Alliance and later the New Republic. (Source Wookieepedia) REQUIRED ITEMS: 1. Dark blue or dark brown quilted thigh-length parka with a full hood trimmed in brown/gray fur, 2 pocket flaps at the bottom of the front yoke and a flap pocket on each upper sleeve 2. Correct rank insignia on upper left side of the vest yoke 3. Light gray or tan pants with quilted knees 4. Light gray or tan suede boots with suede wraps around them and 3 white straps on each 5. Light gray gauntlet style suede gloves with comlink on left wrist 6. White rimmed ski goggles with clear (colourless) lenses 7. Light gray or off-white long scarf 8. Accurate leather gunbelt and buckles with capped holster, correct tools and proper droid caller 9. DL-44 blaster (Empire Strikes Back version), unless local laws prohibit or strongly discourage carrying anything that looks like a firearm 10. White electrobinoculars with attached shoulder-strap 11. White or off-white accurate Hoth cap/soft helmet OPTIONAL ITEMS: EnhanceScan General-Purpose Scanner Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Han Solo (post-Trash Compactor)

    Han Solo (post-Trash Compactor)

      CHARACTER DESCRIPTION Han Solo was a Human smuggler from Corellia who achieved galactic fame as a member of the Rebel Alliance and later the New Republic. (Source Wookieepedia)   REQUIRED ITEMS: 1. Black twill vest with 4 channels/loops at the back yoke, 1 large back pocket and 4 front pockets; the upper right pocket must have quarter moon shape in the upper right corner with a smaller rectangular pocket on top of the larger pocket. Vest should be waist length. 2. White or cream color long-sleeve shirt with placket v-neck and short mandarin collar. 3. Dark blue or navy pocketless pants with accurate red Correllian bloodstripes. 4. Black leather belt punctured entirely with rows of three holes and a two-prong buckle). 5. Black equestrian-type knee-high boots. (leather or leather-look; no laces). 6. Accurate hero Stormtrooper belt (including front boxes) and E11 holster (no thermal detonator). 7. E-11 Stormtrooper blaster, unless local laws prohibit or strongly discourage carrying anything that looks like a firearm. FORMAL REQUIREMENTS: (Must have 3 to be formal) 1. Pintuck down the center front of each pant leg. 2. Riding seam around the seat and down the back of each pant leg. 3. Embroidered bloodstripes. (about 1 inch wide by 1/4 inch high, with only 1/8 of an inch of space between each embroidered section). 4. No visible zipper on the boots. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Han Solo (NJO era)

    Han Solo (NJO era)

      CHARACTER DESCRIPTION Han Solo was a Human smuggler from the manufacturing planet Corellia who achieved galactic fame as a member of the Rebel Alliance and later the New Republic. (Source Wookieepedia)   REQUIRED ITEMS: 1. Navy blue or charcoal twill jacket with long sleeves, 4 front pockets, 1 pocket on the left arm and 1 large back pocket 2. White or cream color long-sleeve cross-placket shirt with a short mandarin collar 3. Dark blue or navy pocketless pants with accurate red Corellian bloodstripes 4. Black leather belt punctured entirely with rows of three holes and a two-prong buckle 5. Black equestrian-type knee-high boots. (leather or leather-look; no laces) 6. Accurate leather gunbelt and buckles with capped holster, correct tools and proper droid caller 7. DL-44 blaster (A New Hope version), unless local laws prohibit or strongly discourage carrying anything that looks like a firearm FORMAL REQUIREMENTS: (Must have 3 to be formal) 1. Pintuck down the center front of each pant leg 2. Riding seam around the seat and down the back of each pant leg 3. Embroidered bloodstripes. (about 1 inch wide by 1/4 inch high, with only 1/8 of an inch of space between each embroidered section) 4. No visible zipper on the boots OPTIONAL ITEMS: 1. Two-tone brown driving gloves 2. Scruffy-looking facial hair / beard Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Han Solo (Rebel General)

    Han Solo (Rebel General)

      CHARACTER DESCRIPTION Han Solo was a Human smuggler from Corellia who achieved galactic fame as a member of the Rebel Alliance and later the New Republic. (Source Wookieepedia)   REQUIRED ITEMS: 1. Black twill vest with 4 channels/loops at the back yoke, no back pocket, and 4 front pockets; the upper front pockets must each have a smaller rectangular pocket on top of the larger pocket. Vest should be waist length 2. White or light gray/tan long-sleeve cross-placket shirt with a short mandarin collar 3. Brown pocketless pants with accurate yellow Corellian bloodstripes 4. Black equestrian-type knee-high boots. (leather or leather-look; no laces). 5. Black leather belt punctured entirely with rows of three holes and a two-prong buckle 6. Accurate leather gunbelt and buckles with capped holster, correct tools and proper droid caller 7. Brown camouflage ankle-length coat/duster 8. DL-44 blaster (Return of the Jedi version), unless local laws prohibit or strongly discourage carrying anything that looks like a firearm FORMAL REQUIREMENTS: (Must have 4 to be formal) 1. Pintuck down the center front of each pant leg 2. Riding seam around the seat and down the back of each pant leg 3. Cuffs for the sleeves of the placket shirt 4. Embroidered bloodstripes. (about 1 inch wide by 1/4 inch high, with only 1/8 of an inch of space between each embroidered section) 5. No visible zipper on the boots COSTUME RESOURCES: 1. Parts of Star Wars Han Solo Return of the Jedi page Updated February 1, 2011 Kay Dee Han Solo Tutorial Parts of Star Wars Han Solo A New Hope page Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Han Solo (Episode VI)

    Han Solo (Episode VI)

      CHARACTER DESCRIPTION Han Solo was a Human smuggler from Corellia who achieved galactic fame as a member of the Rebel Alliance and later the New Republic. (Source Wookieepedia)   REQUIRED ITEMS: 1. Black twill vest with 4 channels/loops at the back yoke, no back pocket, and 4 front pockets; the upper front pockets must each have a smaller rectangular pocket on top of the larger pocket. Vest should be waist length 2. White or light gray/tan long-sleeve cross-placket shirt with a short mandarin collar 3. Brown pocketless pants with accurate yellow Corellian bloodstripes 4. Black equestrian-type knee-high boots. (leather or leather-look; no laces) 5. Black leather belt punctured entirely with rows of three holes and a two-prong buckle 6. Accurate leather gunbelt and buckles with capped holster, correct tools and proper droid caller 7. DL-44 blaster (Return of the Jedi version), unless local laws prohibit or strongly discourage carrying anything that looks like a firearm FORMAL REQUIREMENTS: (Must have 4 to be formal) 1. Pintuck down the center front of each pant leg 2. Riding seam around the seat and down the back of each pant leg 3. Cuffs for the sleeves of the placket shirt 4. Embroidered bloodstripes. (about 1 inch wide by 1/4 inch high, with only 1/8 of an inch of space between each embroidered section) 5. No visible zipper on the boots COSTUME RESOURCES: 1. Parts of Star Wars Han Solo Return of the Jedi page Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Han Solo (Carbon freezing chamber)

    Han Solo (Carbon freezing chamber)

      CHARACTER DESCRIPTION Han Solo was a Human smuggler from Corellia who achieved galactic fame as a member of the Rebel Alliance and later the New Republic. (Source Wookieepedia)   REQUIRED ITEMS: White long-sleeve cross-placket shirt with a short mandarin collar  Brown pocketless pants with accurate yellow Correllian bloodstripes  Black leather belt punctured entirely with rows of three holes and a two-prong buckle  Black equestrian-type knee-high boots. (leather or leather-look; no laces) Arm restraints FORMAL REQUIREMENTS: (Must have 3 to be formal) Pintuck down the center front of each pant leg Riding seam around the seat and down the back of each pant leg Embroidered bloodstripes. (about 1 inch wide by 1/4 inch high, with only 1/8 of an inch of space between each embroidered section) No visible zipper on the boots Updated February 1, 2011 Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Han Solo (Episode V)

    Han Solo (Episode V)

      CHARACTER DESCRIPTION Han Solo was a Human smuggler from Corellia who achieved galactic fame as a member of the Rebel Alliance and later the New Republic. (Source Wookieepedia)   REQUIRED ITEMS: Navy blue or charcoal twill jacket with long sleeves, 4 front pockets, 1 pocket on the left arm and 1 large back pocket White or cream color long-sleeve cross-placket shirt with a short mandarin collar Brown pocketless pants with accurate yellow Corellian bloodstripes Black leather belt punctured entirely with rows of three holes and a two-prong buckle Black equestrian-type knee-high boots. (leather or leather-look; no laces) Accurate leather gunbelt and buckles with capped holster, correct tools and proper droid caller DL-44 blaster (Empire Strikes Back version), unless local laws prohibit or strongly discourage carrying anything that looks like a firearm. FORMAL REQUIREMENTS: (Must have 3 to be formal) Pintuck down the center front of each pant leg Riding seam around the seat and down the back of each pant leg Embroidered bloodstripes. (about 1 inch wide by 1/4 inch high, with only 1/8 of an inch of space between each embroidered section) No visible zipper on the boots Note: The Dressing a Galaxy book lists the Han Solo jacket as charcoal gray. However, the jacket does look navy in the film, so we allow both navy and charcoal gray versions. COSTUME RESOURCES: 1. Parts of Star Wars Han Solo Empire Strikes Back page Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Han Solo (Episode IV)

    Han Solo (Episode IV)

      CHARACTER DESCRIPTION Han Solo was a Human smuggler from Corellia who achieved galactic fame as a member of the Rebel Alliance and later the New Republic. (Source Wookieepedia)   REQUIRED ITEMS: 1. Black twill vest with 4 channels/loops at the back yoke, 1 large back pocket and 4 front pockets; the upper right pocket must have quarter moon shape in the upper right corner, with a smaller rectangular pocket on top of the larger pocket. Vest should be waist length 2. White or cream color long-sleeve shirt with placket v-neck and short mandarin collar 3. Dark blue or navy pocketless pants with accurate red Corellian bloodstripes 4. Black leather belt punctured entirely with rows of three holes and a two-prong buckle 5. Black equestrian-type knee-high boots. (leather or leather-look; no laces) 6. Accurate leather gunbelt and buckles with capped holster, correct tools and proper droid caller 7. DL-44 blaster (A New Hope version), unless local laws prohibit or strongly discourage carrying anything that looks like a firearm FORMAL REQUIREMENTS: (Must have 3 to be formal) Pintuck down the center front of each pant leg Riding seam around the seat and down the back of each pant leg Embroidered bloodstripes. (about 1 inch wide by 1/4 inch high, with only 1/8 of an inch of space between each embroidered section) No visible zipper on the boots OPTIONAL ITEMS: 1. Two-tone brown driving gloves Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Khaleen Hentz

    Khaleen Hentz

    CHARACTER DESCRIPTION Khaleen Hentz was a Human female who was once a Separatist agent sent by Count Dooku to spy on Quinlan Vos as a mole in his spy network until she later turned to the Galactic Republic and became the wife of Vos and the mother of his child. (Source Wookieepedia)   REQUIRED ITEMS: Top in style of comfortable bra with wide shoulder straps of elastic fabric purple or burgundy colored. Low hip shorts made from the same material as bra in the same color Arm covers made of black net fabric and held in place by two wide silver stripes on both ends Black tights with pattern of big eyed net, created of wider stripes. Knee high boots of purple or burgundy color Long purple hair, face is framed with two strands of hair and the rest of hair is secured to fall to the back There is a “tattoo“under left eye in the shape of two tiny triangles, there is also a tattoo on the belly circling naval consisting of four diamonds, four darts and dots OPTIONAL ITEMS: Green eyes or contact lenses  Purple eye shades and purple lipstick WESTAR-34 blaster pistol Standard by Andrea Ulagová and Anna Sirkovská Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Nera Dantels (Empire comics version)

    Nera Dantels (Empire comics version)

    CHARACTER DESCRIPTION Nera Dantels was a Human female smuggler and captain of the freighter Starduster who joined the Alliance to Restore the Republic during the Galactic Civil War. (Source Wookieepedia)   REQUIRED ITEMS: Mid-blue short sleeved midriff t-shirt, form fitting. Same shade of blue form fitting pants/leggings with red stripes running down the side of each leg. High brown leather/leather like boots. Brown leather/leather like belt with silver buckle. Four brown leather/leather like pouches on the belt, two on each side. Yellow vest with decorative piping and with several squares on the back running down the center back in the beige and blackish colors. Rolled up sleeves secured with flaps, mandarin style collar. Brown leather/leather like gloves. Silver gauntlets with two armbands on them. Blue tattoo/bodypaint in the shape of ”angel wings” framing the eyes. OPTIONAL ITEMS: Green eyes or contacts Dark brown hair with fringe Brown holster Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Deliah Blue (Legacy Comics series)

    Deliah Blue (Legacy Comics series)

      CHARACTER DESCRIPTION Deliah Blue was a female Zeltron chief mechanic of the Mynock and a longtime companion of Cade Skywalker and Jariah Syn during their careers as bounty hunters in the wake Sith–Imperial War and the Second Imperial Civil War. Deliah nursed a certain fondness for Skywalker, and maintained a playful, flirtatious relationship with him, a relationship that later grew into mutual love. (Source Wookieepedia) REQUIRED ITEMS: 1. Top consisting of blue colored center part with three cutouts, yellow panels on the sides of the centre, green panel that continues to form the back panel of the top. Black shoulder straps that creates the upper part of the back section of the top as well 2. Low hip fitted pants that are created from panels of blue , yellow and black color, while the blue panel is on both sides with 4 to 5 cutouts in it, yellow panels creates the middle section of the pants and black panels create the inner legs parts 3. Brown leather belt with gold studs/holes in it, with five gold decorative round pieces on it, the center piece is bigger with different decoration on it and the other four are same. Piece of purple fabric of same color as knee pads, hanging from the belt 4. Arm covers of black fabric with several cut-outs 5. Gold massive wide bracelets with relief pattern and big purple stone 6. High boots of purple color, padded knee pads of the same color as boots 7. Long blue hair/wig 8. Pink skin color, blue lips OPTIONAL ITEMS: Violet eye contacts Blaster – bluebolt style Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Mirax Terrik Horn (Rogue Squadron novels)

    Mirax Terrik Horn (Rogue Squadron novels)

      CHARACTER DESCRIPTION Mirax Terrik Horn was the daughter of the smuggler Booster Terrik, wife of the Jedi Corran Horn, and mother of Valin and Jysella Horn. Mirax turned to smuggling, operating her father’s ship, Pulsar Skate.  Mirax encountered Rogue Squadron a number of times, including on Mrlsst, where she aided the Rogues in bargaining for the Phantom Project. (Source Wookieepedia) REQUIRED ITEMS: Close-fitting blue flight suit Black boots to below knee Belt and thigh holster with pouches Patches to match description Code cylinders Blaster, unless local laws prohibit or strongly discourage carrying anything that looks like a firearm Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Mirax Terrik Horn (The Phantom Affair)

    Mirax Terrik Horn (The Phantom Affair)

      CHARACTER DESCRIPTION Mirax Terrik Horn was the daughter of the smuggler Booster Terrik, wife of the Jedi Corran Horn, and mother of Valin and Jysella Horn. Mirax turned to smuggling, operating her father’s ship, Pulsar Skate. Mirax encountered Rogue Squadron a number of times, including on Mrlsst, where she aided the Rogues in bargaining for the Phantom Project. (Source Wookieepedia) REQUIRED ITEMS: (“The Phantom Affair” by Michael Stackpole, Star Wars Customizable Card Game) Close-fitting tan pants with black stripes on the outside of the legs Calf-high black boots White long-sleeved plain t-shirt Black flight jacket with fleece collar, sleeve lacing and graphic design on back Belt with several pouches and thigh holster FORMAL REQUIREMENTS:  You must have at least one of the following items to be accepted: Light Blue driving gloves Mirax’s helmet Code Cylinders DL-44 COSTUME RESOURCES: BurntTheMacaroni’s Mirax Costuming Page  Credit: BurntTheMacaroni Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Lando Calrissian (Episode V, End Scene)

    Lando Calrissian (Episode V, End Scene)

      CHARACTER DESCRIPTION Lando Calrissian was a male human professional gambler, entrepreneur, smuggler, and general throughout various points in his life. After a series of events led to him losing the Millennium Falcon to a Corellian named Han Solo on Bespin, Calrissian eventually became the Baron Administrator of Cloud City for a time—a position he once again gained through sabacc. (Source Wookieepedia) REQUIRED ITEMS: Black vest with breast pockets White, long-sleeved dress shirt with a collar Dress pants and shoes, no street clothes. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Lando Calrissian (Bespin)

    Lando Calrissian (Bespin)

      CHARACTER DESCRIPTION Lando Calrissian was a male human professional gambler, entrepreneur, smuggler, and general throughout various points in his life. After a series of events led to him losing the Millennium Falcon to a Corellian named Han Solo on Bespin, Calrissian eventually became the Baron Administrator of Cloud City for a time—a position he once again gained through sabacc. (Source Wookieepedia) REQUIRED ITEMS: 1. Tailored-fit shirt with long full sleeves of a medium blue matte fabric, with a stand up collar and placket of black / blue-black leather or leather look fabric. The sleeves are gathered to narrow black / blue-black leather or leather look cuffs. 2. Tailored plain-front pocketless pants of a dark navy matte fabric. 3. Wide belt with narrow trapezoidal sections of a black or dark ink blue leather or leather-look. The central section, or “buckle”, of the belt has an embossed Art Deco-like zig-zag pattern. 4. Low-heeled, plain, tailored ankle or mid-calf boots in a black / blue-black leather or leather-look material. No shoe-laces. 5. Full circle cape of a medium blue matte fabric, lined in a burnished gold Asian brocade in a dense “dragon” pattern, with a black / blue-black wide fold-over collar leather or leather-look. The cape should end below the knees. 6. Hair should be styled as seen in the movie. Costumer should have a moustache. Wigs and prosthetics are allowed.   OPTIONAL ITEM: 1. Wrist communicator consisting of a thick square silver face with red, silver and black button button details attached to a plain black band.  The communicator is worn with the silver face on the inside of the wrist.   COSTUME RESOURCES: Fringe forum Docking Bay 94 source guide   Standard reviewed by the Costume Standards Committee 11 Feb 2015   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Prequel Trilogy Tusken Raider – Male

    Prequel Trilogy Tusken Raider – Male

    CHARACTER DESCRIPTION Tusken Raiders, less formally referred to as Sand People or simply as Tuskens, were a culture of nomadic, primitive sentients indigenous to Tatooine, where they were often hostile to local settlers. The term Sand People was given to them due to their existence in the desert, and was in use from at least around 4000 BBY; but the more formal name of Tusken Raiders was acquired much later, due to a period of concerted attacks on the settlement at Fort Tusken in 98-95 BBY. Although this name is often used as a common term for the race, it actually refers only to the participants of the attack on the settlement. Specialists studying the past of the Tusken Raiders also used the term Ghorfa to denote an earlier sedentary phase of their culture, and lastly Kumumgah, for the earliest stratum of sentient civilization on the planet, believed by some to represent a common ancestry shared by the Ghorfa and the Jawas. In the culture of the Tuskens, to expose any part of the flesh was forbidden and seen as a disgrace. (Source: Wookiepedia) REQUIRED ITEMS 1. Fully wrapped helmet/head similar to one as seen in Episodes I and II: must include cloth wraps (duck cloth, muslin or similar fabric should be used), leather/simulated leather mouth-wraps, 2 tapered/straight eye-stalks with 2 slits cut into the underside of each, 4 head-spikes, 2 blood-spitters, 1 silver nose-piece (tooth) with at least 2 vertical slots, screened lenses so as not to see the eyes and mouth of the wearer. 2. Fabric robe of similar color, texture, pattern to those seen in Episodes I and II. 3. Fabric neck wrap of similar color, texture, and pattern as ones seen in Episodes I, and II. 3. Fabric waist wrap of similar color, texture, and pattern of those seen in Episodes I and II. 4. Sand-colored cloth/leather gloves. 5. Cloth arm wraps covering the arms until concealed within robe(s). 6. Boots/shoes covered with cloth wrappings. (If shoes then cloth leg wraps covering the legs until concealed within robe.) 7. At least one bandolier of similar type/design as seen in Episodes I and II across the chest/waist. 8. Gaffi stick OR Tusken Rifle either/both of similar type/design as found in Episodes I and II. All elements of this costume MUST BE weathered/tattered to simulate living in a barren, desert environment. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Tusken Raider, Male Version 2 (Bantha Rider)

    Tusken Raider, Male Version 2 (Bantha Rider)

    CHARACTER DESCRIPTION Tusken Raiders, less formally referred to as Sand People or simply as Tuskens, were a culture of nomadic, primitive sentients indigenous to Tatooine, where they were often hostile to local settlers. The term Sand People was given to them due to their existence in the desert, and was in use from at least around 4000 BBY; but the more formal name of Tusken Raiders was acquired much later, due to a period of concerted attacks on the settlement at Fort Tusken in 98-95 BBY. Although this name is often used as a common term for the race, it actually refers only to the participants of the attack on the settlement. Specialists studying the past of the Tusken Raiders also used the term Ghorfa to denote an earlier sedentary phase of their culture, and lastly Kumumgah, for the earliest stratum of sentient civilization on the planet, believed by some to represent a common ancestry shared by the Ghorfa and the Jawas. In the culture of the Tuskens, to expose any part of the flesh was forbidden and seen as a disgrace. (Source: Wookiepedia) REQUIRED ITEMS 1. Fully wrapped helmet/head similar to one as seen in EpisodesIV: must include cloth wraps (duck cloth, muslin or similar fabric should be used), leather/simulated leather mouth-wraps, 2 tapered/straight eye-stalks with 2 slits cut into the underside of each, 4 head-spikes, 2 blood-spitters, 1 silver nose-piece (tooth) with at least 2 vertical slots, screened lenses so as not to see the eyes and mouth of the wearer. 2. Robe of similar color, texture, and pattern to those seen in Episode IV. 3. Breather similar to ones seen in Episode IV 4. Fabric waist wrap of similar color, texture, and pattern of those seen in Episodes IV. 4. Sand-colored cloth/leather gloves. 5. Cloth arm wraps covering the arms until concealed within robe(s). 6. Boots/shoes covered with cloth wrappings. (If shoes then cloth leg wraps covering the legs until concealed within robe.) 7. At least one bandolier of similar type/design as seen in Episodes IV across the chest/waist. 8. Gaffi stick OR Tusken Rifle either/both of similar type/design as found in Episodes IV. All elements of this costume MUST BE weathered/tattered to simulate living in a barren, desert environment. COSTUME RESOURCES  Studio Creations Tusken Raider Tutorial TK-899 Tusken Raider Tutorial Parts of Star Wars Tusken Raider A New Hope page Parts of Star Wars Tusken Raider Episode I page Costume standard by Jada, approved by LMO & CSC 1/13/13. For costumes submitted on or after 2/1/13. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Tusken Raider – Male Version 1

    Tusken Raider – Male Version 1

    CHARACTER DESCRIPTION Tusken Raiders, less formally referred to as Sand People or simply as Tuskens, were a culture of nomadic, primitive sentients indigenous to Tatooine, where they were often hostile to local settlers. The term Sand People was given to them due to their existence in the desert, and was in use from at least around 4000 BBY; but the more formal name of Tusken Raiders was acquired much later, due to a period of concerted attacks on the settlement at Fort Tusken in 98-95 BBY. Although this name is often used as a common term for the race, it actually refers only to the participants of the attack on the settlement. Specialists studying the past of the Tusken Raiders also used the term Ghorfa to denote an earlier sedentary phase of their culture, and lastly Kumumgah, for the earliest stratum of sentient civilization on the planet, believed by some to represent a common ancestry shared by the Ghorfa and the Jawas. In the culture of the Tuskens, to expose any part of the flesh was forbidden and seen as a disgrace. (Source: Wookiepedia) REQUIRED ITEMS 1. Fully wrapped helmet/head similar to one as seen in Episode IV: must include cloth wraps (duck cloth, muslin or similar fabric should be used), leather/simulated leather mouth-wraps, 2 tapered/straight eye-stalks with 2 slits cut into the underside of each, 4 head-spikes, 2 blood-spitters, 1 silver nose-piece (tooth) with at least 2 vertical slots, screened lenses so as not to see the eyes and mouth of the wearer. 2. Robes – Inner Robe of similar color, texture, and pattern to those seen in Episode IV. Outer Robe made of a similar color, texture, and pattern to those seen in Episode IV. 3. Breather similar to ones seen in Episode IV 4. Fabric waist wrap of similar color, texture, and pattern of those seen in Episodes IV. 4. Sand-colored cloth/leather gloves. 5. Cloth arm wraps covering the arms until concealed within robe(s). 6. Boots/shoes covered with cloth wrappings. (If shoes then cloth leg wraps covering the legs until concealed within robe.) 7. At least one bandolier of similar type/design as seen in Episodes IV across the chest/waist. 8. Gaffi stick OR Tusken Rifle either/both of similar type/design as found in Episodes IV. All elements of this costume MUST BE weathered/tattered to simulate living in a barren, desert environment. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Tusken Female

    Tusken Female

    CHARACTER DESCRIPTION Tusken Raiders, less formally referred to as Sand People or simply as Tuskens, were a culture of nomadic, primitive sentients indigenous to Tatooine, where they were often hostile to local settlers. The term Sand People was given to them due to their existence in the desert, and was in use from at least around 4000 BBY; but the more formal name of Tusken Raiders was acquired much later, due to a period of concerted attacks on the settlement at Fort Tusken in 98-95 BBY. Although this name is often used as a common term for the race, it actually refers only to the participants of the attack on the settlement. Specialists studying the past of the Tusken Raiders also used the term Ghorfa to denote an earlier sedentary phase of their culture, and lastly Kumumgah, for the earliest stratum of sentient civilization on the planet, believed by some to represent a common ancestry shared by the Ghorfa and the Jawas. In the culture of the Tuskens, to expose any part of the flesh was forbidden and seen as a disgrace. (Source: Wookiepedia) REQUIRED ITEMS 1. Golden-Bronze Female Tusken mask: ( suggested to have some green tint to give it a weathered copper look). The forehead portion has 3 “jewels”, there’s a wire mesh visor, 4 divots in the nose/cheek area. The“bib” has 9 chinks each with an oval in the center and one long piece at the bottom, 5 bones in the center, a half circle at the end of the bones. 2. Layered Shawl/Burka – Weathered Tan/Sand Monk material (or similar) lighter than the dress. The shawl length should end below the knees and be somewhat formfitting. 3. Dress/Inner Robe: Lighter weight Monk material (similar to shawl) Full skirted, Dress can be short sleeved or long sleeved (see note on arm wraps). Must be weathered, especially at the bottom. 4. Weathered, Tan/mustard colored cotton or leather gloves . NO satin or velvet. 5. Weathered bronze color tribal design bracelets. 6. Gauze or muslin Arm wraps, wrapped up to the elbow. If dress is short-sleeved , there must be no visible skin.. 7. Shoes/Boots must be covered in weathered muslin or gauze strips of cloth (maybe cutaway on the bottom of the soles for safety). The wraps must go up the legs w/no visible skin 8. Sturdy leather or leather like material bag/purse. Rectangle or long “half” oval shape with a half circle bone or bone like clasp in the front. 9. Belt/Sash – Gauze or similar material cloth belt/sash OPTIONAL Papoose- Cloth wrapped Tusken Raider child carrier Tusken Raider Child Gaderffii (gaffi stick)- of similar design to the styles used in Episode 2 and Episode 4. Credited: Jada (Hope “Jada” Diaz) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Sharad Hett (Tusken)

    Sharad Hett (Tusken)

    CHARACTER DESCRIPTION Sharad Hett was a powerful male Human Jedi Knight who lived during the decades of relative peace prior to the Invasion of Naboo. A heroic and legendary figure in the pre-Clone Wars Galactic Republic, Hett was well known throughout the ranks of Jedi Order. He eventually grew weary of his fame and, after a disaster that destroyed his homeworld and killed his family, exiled himself to Tatooine, where he became the warlord of a tribe of Tusken Raiders. He sired a son, A’Sharad Hett, in this period, and continued to lead the Tuskens until the Jedi sent a representative to retrieve him—Ki-Adi-Mundi. During a war between the Tuskens and the Hutts of Tatooine, Sharad Hett was killed by Aurra Sing. Honoring the Jedi’s final wish, Ki-Adi-Mundi took A’Sharad back to Coruscant as his Padawan. Many decades after Sharad’s death, A’Sharad would fall to the dark side and become the infamous Darth Krayt, ruler of the One Sith. Source: Wookipedia REQUIRED ITEMS 1. Mask/Helmet – Traditional Tusken helmet with 4 or 6 spikes, weathered cloth wraps, leather snout, eye stalks, nose pick, blood spitters. Eye stalks must have red lenses at opening. 2. Tunic – Weathered blue (should be shades close to dodgerblue4 #104E8B). The sleeves (3/4 sleeves) and neckband should be hemmed while the bottom is tattered.  3. Neck wrap – should be the same color as the helmet wraps and tucks into the tunic. 4. Pants – weathered dark khaki pants 5. Arm wraps – should be visible and wrap past the hem of the sleeves and not let any skin show. Wraps should be weathered. 6. Gloves – weathered tan gloves 7. Leg wraps/foot wear – Leg wraps must go ¾ way up calf. Either a boot or a shoe can be used and must be wrapped. If a shoe is used the leg wrap must blend into the shoe and not let skin show. 8. Bandoleers/Ammo belt/Rebreather – 2 Enfield style bandoleers are worn cross-chest style. Bandoleer coming over the right shoulder has two silver cylinders that are connected by a U-shaped coupling forming a rebreather above the pouches. Ammo belt is worn around the waist with a total of 8 ammo boxes which may be worn 3 in front/5 in back or 4 and 4. 9. Lightsaber – non-toy lightsaber (if bladed blade must be red) OPTIONAL ITEMS Lightsaber – Sharad Hett’s lightsaber Gaffi – either a traditional gaffi stick or Sharad Hett’s gaffi with Krayt Dragon Claw at the end. Tabards – costume may include tabards that are the same color as the tunic and are weathered and tattered on the bottom edge. Arm wraps – may be worn on the outside of sleeve and up to the elbow COSTUME RESOURCES Reference photos Standard by Jada Diaz Added by LMO 10/26/11 Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Twi’Lek Slave Dancers

    Twi’Lek Slave Dancers

    CHARACTER DESCRIPTION Twi’leks, sometimes referred to disparagingly as “Tail-heads”, were an omnivorous humanoid species originating from the planet Ryloth. Twi’lek females were often used as slaves or dancers because of their beauty. Entertainment slaves were forced typically to wear revealing outfits to please their masters (or their master’s guests) and submit to them. These were usually slaves to criminals, rather than major organizations. Notable examples included the Twi’lek Oola and Leia Organa Solo, who were enslaved by Jabba Desilijic Tiure. Source: Wookiepedia     REQUIRED ITEMS Lekku in color that matches painted face and exposed painted skin color, preferably skin-like appearance as opposed to fabric finish Leather or clothe head wrapping Accurate ear-caps Dancer clothing similar to what is seen on screen or in reference material Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Oola (Twi’lek)

    Oola (Twi’lek)

    Required Items: Green skin Lekku in green, preferably skin-like appearance as opposed to fabric finish Leather head wrapping Accurate ear-caps Netting bodysuit Sandals Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Lyn Me (Twi’lek)

    Lyn Me (Twi’lek)

    CHARACTER DESCRIPTION Lyn Me was a Twi’lek dancing girl. She performed with the Max Rebo Band while they played at Jabba’s Palace. Twi’leks, sometimes referred to disparagingly as “Tail-heads”, were an omnivorous humanoid species originating from the planet Ryloth. Twi’lek females were often used as slaves or dancers because of their beauty.Entertainment slaves were forced typically to wear revealing outfits to please their masters (or their master’s guests) and submit to them. These were usually slaves to criminals, rather than major organizations. Notable examples included the Twi’lek Oola and Leia Organa Solo, who were enslaved by Jabba Desilijic Tiure. Source: Wookieepedia     REQUIRED ITEMS White body color White Lekku Leather headgear Leather strapping of Lekku and body Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Bith Musician

    Bith Musician

    CHARACTER DESCRIPTION This unidentified Bith lived in the Galactic City of Coruscant and worked as a musician along with two other Bith and an Ithorian in a cantina. Around 21 BBY, when bounty hunters Robonino and Chata Hyoki came to the cantina to discuss their plan to assassinated senator Padmé Amidala with Count Dooku, this Bith was playing a drum like instrument. Source: Wookipedia REQUIRED ITEMS Accurate Bith mask – closure must not be seen and can be covered by shirt Accurate Bith hands Tailored black or navy blue jacket with high Mandarin collar. Buttons must be same color as shirt. Light brown or grey pants Brown or Black boots (mid-calf) OPTIONAL ITEMS Screen accurate instrument ADDITIONAL IMAGES http://img.photobucket.com/albums/v139/SithJada/lcj/bith2.jpg http://img.photobucket.com/albums/v139/SithJada/lcj/Bith.jpg Standard by Jada Diaz. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Willrow Hood – “Ice Cream Maker Guy”

    Willrow Hood – “Ice Cream Maker Guy”

    CHARACTER DESCRIPTION Willrow Hood was a Human male miner who lived and worked on Cloud City, a floating station located above the gas giant Bespin. He worked for A’roFilter, a mining company sympathetic to the Alliance to Restore the Republic, as the head of the department responsible for dealing with the Rebel Alliance, supplying discounted Tibanna gas. Eventually, though, the Galactic Empire invaded and conquered the planet; in order to protect the Rebellion contacts Hood was responsible for, the miner took A’roFilter’s main computer’s memory core, as it contained the encrypted information on Rebel contacts. After finding the nearest disposal unit, Hood dumped the entire core, rather than risk it falling into the wrong hands; thus, Willrow Hood was able to save the Alliance’s interests. Hood remained on Cloud City throughout the Imperial occupation, suffering imprisonment and torture but revealing nothing. Source: Wookipedia REQUIRED ITEMS 1. Orange flight suit with mandarin-style collar and pointed tab, code cylinder pocket on upper left arm, rectangular pocket with a flap closure on upper right arm, and thigh pockets (upper set required, lower set optional). No visible zippers or snaps. 2. Mid-calf black boots (Jack boots or engineer boots are acceptable. No lace up boots. High-Calf boots are acceptable with sufficient blousing of the flight suit legs.) 3. Old vintage motorized white or light colored ice cream maker. 4. Code cylinders in left shoulder pocket. Two minimum, three maximum. 5. Comm pad visible inside comm pad pocket on lower left arm. 6. Hair, mustache and sideburns of a natural hair color matching your own color need to be a similar style seen on the character. Wigs (and fake mustaches/sideburns) are permitted, but must appear natural. As with any face character, you must try to resemble that character. Updated: August 26, 2013 Reviewed by the Rebel Supporters Forum Members: July 29, 2013 to August 11, 2013. Reviewed by the Costume Standards Committee: August 9, 2013 to August 26, 2013. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    The Tonnika Sisters

    The Tonnika Sisters

    The Tonnika sisters were identical twins who became infamous con artists under the New Order. Individually, they were Brea and Senni Tonnika, although they often pretended to be just one woman, Bresenni. In 0 BBY, they earned additional fame for being in the Mos Eisley Cantina when Luke Skywalker first met Han Solo, but in fact, the “Tonnika sisters” in the Cantina were the Mistryl Shadow Guard warriors Shada D’ukal and Karoly D’ulin, masquerading as Brea and Senni in the course of a mission. Source: Wookipedia. REQUIRED ITEMS 1. Long-sleeve unitard/catsuit with a seam up the front middle and zipper up the back, made from matte/non-shiny fabric. a. Olive/dark green in colour for the green sister. b. Navy/dark blue for the blue sister. 2. Boots: close-fitting, calf-high black leather/leather-like boots with a flat sole. Plain boots, no visible zipper, laces, buckles etc. 3. High-leg briefs worn on top of the unitard/catsuit. a. Light green (not fluorescent) for the green sister. b. Light blue (not fluorescent) for the blue sister. 4. Collar and cuffs. Black and light green/light blue (same color as the briefs): a. Collar: a triangular shaped collar with a point at the midline on the front, back and each shoulder with alternating panels of light green/light blue and black matte/non-shiny fabric (four panels of green/blue and four panels of black). The light green/light blue panels are made from the same fabric as the briefs. There is a thin black trim around the edges of the collar. The points of the collar reach down to the bust line and to the tips of each shoulder. b. Cuffs: made from the same fabrics as the collar. The cuffs are longer on the top of the arm than underneath. Black panel on top and light green/light blue panel underneath. Thin black trim around the edges of the cuff. Cuffs are approximately half the length of the forearm. 5. Black leather/leather-like belt, approx. 2”-2.5” wide with a buckle on the front. Buckle consists of a flat rectangle, a circle on top of the rectangle and a flat-bottom pyramid in the middle of the circle- all matt silver in color. The belt has 3 sets of 4 silver metal squares, starting from approx. 1” from each side the buckle outwards to the hips. 6. Garter around right thigh. Black elastic approx. 1” wide with thin, red vertical stripes the full circumference of the garter. 7. Black hair. A ‘beehive’ on top of the hair with thin plaits wrapped around it horizontally from top to bottom. Armpit-length, loose black hair hangs down from the beehive, with a few single plaits hanging down. a. Green sister has a single plait across the forehead below the hairline. b. Blue sister has 3 – 4 rows of plaits across the forehead below the hairline. 8. Makeup: a. Fingernails painted with matt silver nail varnish or false nails, painted with matt silver nail varnish. b. Green lipstick, eye shadow and eyeliner on the face for the green sister. c. Blue lipstick, eye shadow and eyeliner on the face for the blue sister. OPTIONAL ELEMENTS Gold bangle/bracelet on left wrist on the green sister only. If this costume is done as a pair, the green sister is ideally taller than the blue sister White handled smoking pipe, cylinder-shaped,...

    read more

    Owen Lars (Episode III)

    Owen Lars (Episode III)

    CHARACTER DESCRIPTION Owen Lars was the son of moisture farmer Cliegg Lars and the stepbrother of Anakin Skywalker. He married Beru Whitesun, and after his father’s death, he inherited his job as a moisture farmer. In 19 BBY, Beru convinced Owen to adopt Anakin’s son, Luke Skywalker, as Anakin had turned to the dark side and become the infamous Darth Vader. Owen and Beru raised their nephew as well as they could, and Owen instilled into Luke the values of his own childhood. Fearful of Luke’s potential, and distrustful of the outside galaxy, Owen attempted to keep Luke isolated and ignorant of his true parentage. Source: Wookieepedia.     REQUIRED ITEMS Brown/multi-colored mock neck shirt with self-bias at the neck. Tan/sand colored long sleeved tunic with binding at neck and front edge (approximately two inches in width)and overlapping right over left just above waistline. Medium tan pants. Medium brown leather or pleather boots with gray torn fabric strips wraps from the upper calf (just below the knee) to ankle (boot shaft must be covered by fabric strips). Brown belt and buckle with bronze colored buckle with a geometric design and two pouches with geometric designs. OPTIONAL ITEM Costumer should have a “5 o’clock shadow” or short trimmed beard and mustache. Updated: September 6, 2013 Costume Standards Committee Review: July 10, 2013 – August 12, 2013. Rebel Supporters Forums Review: August 12, 2013 – September 6, 2013. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Owen Lars (Episode II)

    Owen Lars (Episode II)

    CHARACTER DESCRIPTION Owen Lars was the son of moisture farmer Cliegg Lars and the stepbrother of Anakin Skywalker. He married Beru Whitesun, and after his father’s death, he inherited his job as a moisture farmer. In 19 BBY, Beru convinced Owen to adopt Anakin’s son, Luke Skywalker, as Anakin had turned to the dark side and become the infamous Darth Vader. Owen and Beru raised their nephew as well as they could, and Owen instilled into Luke the values of his own childhood. Fearful of Luke’s potential, and distrustful of the outside galaxy, Owen attempted to keep Luke isolated and ignorant of his true parentage. Source: Wookieepedia.     REQUIRED ITEMS 1. Ivory mock-neck shirt with narrow vertical ribbing. 2. Grey or tan wool (or similar fabric) long sleeved tunic with wide binding on neck & front edge overlapping left over right. The binding should be approximately 3 to 4 inches wide around the neck, then be wider near the bottom of the tunic. Hem should fall just below buttox. 3. Light tan jacket of rough woven material with rounded collar folded over. Sleeves should have 5 tucks sewn into the sleeves around the elbow with large folded back cuffs (approximately 5 inches in width). Jacket should be no shorter than ankle length (or 2 inches off the ground). 4. Light tan pants with seams at the knees and fabric straps at the ankle about 1-2” above the hem, in the front of the pant leg from side seam to side seam. 5. Medium brown leather or pleather boots (shoes with no laces are acceptable). 6. Brown leather or pleather belt with matching pouch. OPTIONAL ITEM Costumer should have a “5 o’clock shadow”. Updated: September 6, 2013 Costume Standards Committee Review: July 10, 2013 – August 12, 2013. Rebel Supporters Forums Review: August 12, 2013 – September 6, 2013. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Beru Lars

    Beru Lars

    CHARACTER DESCRIPTION Beru Whitesun Lars, the wife of Owen Lars, was a Tatooinian woman who raised Luke Skywalker after the fall of the Galactic Republic. Coming from a long line of moisture farmers, Beru Whitesun grew up near Mos Eisley on Tatooine. On a trip to Anchorhead, she met Owen Lars, the son of another moisture farmer, Cliegg Lars. Beru and Owen fell in love, and Beru later became part of the Lars family. Source: Wookiepedia REQUIRED ITEMS 1. Medium blue linen or cotton long sleeved shirt with vertical tucks or pleats spaced approximately 2” apart. Worn untucked, meaning the tucks or pleats are now sewn the length of the shirt. The shirt sleeves should extend 1 to 2 inches beyond the jacket. 2. Royal blue (darker shade than shirt) jacket of rough woven material with binding on neck and front edge. Worn open. Jacket should be about 1-2” longer than blue shirt. 3. Tan wrap-around style ankle length skirt. 4. Medium to dark brown, calf high, low wedge heel, leather or non-shiny pleather boots. (Suede preferred with top stitched seam over toes and top of foot.) 5. Light Reddish-Brown belt worn knotted over shirt, under jacket. 6. Hair must be parted above left eye and pulled back into a braid that is coiled into a bun at the back of the head. Naturally occurring hair colors only. Updated: September 6, 2013 Costume Standards Committee Review: July 10, 2013 – August 12, 2013. Rebel Supporters Forums Review: August 12, 2013 – September 6, 2013. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Beru Whitsun

    Beru Whitsun

    CHARACTER DESCRIPTION Beru Whitesun Lars, the wife of Owen Lars, was a Tatooinian woman who raised Luke Skywalker after the fall of the Galactic Republic. Coming from a long line of moisture farmers, Beru Whitesun grew up near Mos Eisley on Tatooine. On a trip to Anchorhead, she met Owen Lars, the son of another moisture farmer, Cliegg Lars. Beru and Owen fell in love, and Beru later became part of the Lars family. Source: Wookieepedia REQUIRED ITEMS 1. Medium blue linen or cotton long sleeved shirt with vertical tucks or pleats spaced approximately 2” apart. Worn untucked, meaning the tucks or pleats are now sewn the length of the shirt. 2. Light tan jacket of rough woven material with binding on neck and front edge overlapping just before waist level. Jacket should be about 1-2” shorter than blue shirt. Slits at side seams approximately 3-4” in length. 3. Tan wrap-around style ankle length skirt, closed in the front but drapes so that it opens along the opening when walking. 4. Medium to dark brown, mid-calf high, low wedge heel, leather or non-shiny pleather boots. (Suede boots preferred with top stitched seam over toes and top of foot.) 5. Brown belt worn knotted over jacket with one brown (film style) leather or pleather pouch. 6. Hair must be parted down middle with two small braids at temples coiled into flat buns above ears and one larger braid coiled into a bun at the back of the head. Naturally occurring hair colors only. Updated: September 6, 2013 Costume Standards Committee Review: July 10, 2013 – August 12, 2013. Rebel Supporters Forums Review: August 12, 2013 – September 6, 2013. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Guri

    Guri

    CHARACTER DESCRIPTION Guri was a Human replica droid, designed to be an almost perfect replica of a Human female, and the only one of her kind engineered as an assassin. She was created around 7 BBY by the Imperial researchers Simonelle and Massad Thrumble for Prince Xizor, head of the Black Sun crime syndicate. After being sold to Xizor for nine million credits, Guri served as his lieutenant and was one of the few individuals the necessarily paranoid crime lord believed he could trust. Xizor left Guri to attend to much of the day to day running of Black Sun and many incorrectly assumed that she was the leader of the syndicate. Guri also served as an assassin, eliminating several of Xizor’s enemies, including Imperial Advisor Fendrilon Koozar, the Ubese bounty hunter Boushh and the leaders of the rival company Ororo Transportation. Source: Wookiepedia. REQUIRED ITEMS Dress: 1. The long-sleeved dress should be made of blue material with a yellow choker style collar. 2. The right sleeve of this dress has two narrow yellow stripes sewn around the mid forearm at an obtuse 135 degree angle that extends from the outer to inner aspect of the arm and encircles it. The right sleeve has a slightly larger narrow yellow stripe that encircles the bicep area. 3. The left sleeve has a thick band that encircles the bicep area. The left forarm has a bracer style yellow band that extends from the elbow to wrist. *Note, there are many different picture variations to the left sleeve.*The bracer may be connected to the bicep band by a sewn yellow length of material on the back part of the upper arm. 4. The front skirt panel should be approximately 20cm wide and should reach to the ankles. The fabric should be slightly gathered, producing folds down the length of the panel. The back skirt panel must also be ankle length and gathered as well. Yellow Bodysuit/Vest: 1. The bodysuit/vest is form-fitting and covers the entire torso front and back. 2. The neckline is deep V Shape. 3. The front bottom edge comes down in a V shape also, while the back may be rounded or may echo the pointed design on the front. 4. The zipper should be concealed in the back seam. Gloves: *Note there are many picture variations to the gloves. The following are exceptable: 1. Gloves on both hands may be regular size with or without fingers. 2. Right glove may mid foream at an obtuse 135 degree angle to complement yellow stripes on right forearm and may be with or without fingers. Footwear/Boots: 1. The “boots” appear to be black T-Strap dance style high heeled shoes paired with yellow shin guards. 2. The shin guards have a border pattern that appears thicker than the rest of the guards. Hair Style: 1. Long hair slightly layered from shoulders to midback. OPTIONAL ITEM 1. Ankle length blue cape in the same shade as the dress with large yellow collar and blue hood. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Wampa

    Wampa

    CHARACTER DESCRIPTION Wampa ice creatures were carnivorous predatory reptomammals indigenous to the remote Outer Rim Territories ice planet Hoth. The bipedal beasts stood over two meters in height with shaggy white fur constantly stained by the blood and guts of slaughtered prey. Wampas were armed with jagged yellow teeth and deadly claws. Primarily solitary hunters, wampas occasionally hunted in packs, preferring to ambush their prey from the camouflage of Hoth’s snow banks and blizzards. Stunned victims were carried back to the creatures’ lairs, typically large ice caves, where the wampas ate at their leisure. The planet’s omnivorous tauntauns formed the bulk of the wampas’ prey, although they would attack anything they encountered. The Alliance to Restore the Republic’s Echo Base on Hoth came under constant wampa assaults in 3 ABY. While rarely seen away from their remote homeworld, wampas were known to have participated in illegal gladiatorial combat venues. They were highly valued among big-game hunters for the challenge that came with hunting the creatures, as well as for their pelts, stuffed heads, and other miscellaneous souvenirs that commanded high prices on the black market. Wampas were later protected under legislation to prevent endangered species from falling into extinction by the Galactic Federation of Free Alliances. Source: Wookipedia REQUIRED ITEMS White/cream-colored hair or fur Large-clawed hands and feet Horns Fangs Accurate mask with no bald Wampa skin except for the mouth, nose and eyes Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Jawa

    Jawa

    CHARACTER DESCRIPTION  Jawas were typically short rodent-like natives of Tatooine. They were passionate scavengers, seeking out technology for sale or trade in the deep deserts in their huge sandcrawler transports. A band of Jawas was responsible for locating C-3PO and R2-D2 and selling them to Luke Skywalker’s uncle, Owen Lars. Another tribe of Jawas, led by Tteel Kkak, found Jabba the Hutt’s rancor. They had a reputation for swindling, as they had a penchant for selling old equipment such as outdated faulty droids to moisture farmers. However, they were extremely passive beings, and hardly put up any resistance to colonists of their planet unlike the other natives the Sand people, instead seeing foreigners as an excellent business opportunity. Source: Wookipedia REQUIRED ITEMS 1. Mask (and eyes) a. Black mask covering the entire face of the costumer so that no parts of the costumer’s head is visible. Face paint is not acceptable. b. The mask may be used as a base upon which the two glowing eyes are mounted. c. When in full costume, only the glowing eyes should be visible from within the opening of the hood. d. The eyes should glow, rather than emit a beam of light (flashlights or other beam emitting lights are not permitted). Incandescent lamps or non-directional LEDs are ideal. e. Eyes should be yellow or light orange (amber), spaced for “binocular vision” and approximately 1″ – 1.25″ in diameter. 2. Robe and Hood a. Robe and hood are a dark rust-brown textured fabric, and are separate pieces (hood is not attached to the robe). b. Robe pattern should be such that there are no visible seams and with an off center opening (on the front) that runs the length of the garment. The robe may also be sewed closed. The only seams that would appear would be left and right side seams on the underside of the sleeves to the arm pit area and proceeding down each side. Sleeves and bottom of the robe are unhemmed and be tattered/frayed. c. Hood is “pointy” and must be lined with a solid, black fabric. d. The hood may be reinforced to maintain the facial opening, and should lap over (the robe) and onto the shoulders. e. The flaps at the bottom front of the hood should overlap and may wrap around the neck. f. Robe and hood may be weathered. 3. Gloves a. Black cloth or leather (or leather-like) gloves extending over the wrist (and along the arm to ensure no skin is visible). b. Gloves should be plain. Adornments, buckles, straps, etc. are not permitted. 4. No exposed skin (or clothing) a. Black or brown undergarments should cover the costumers so that no skin (or other clothing) is visible. 5. Bandolier(s) a. (At least) one bandolier is required, and should be patterned from WWII or earlier bandoliers. b. Black or brown leather or leather-like material should be used. c. Bandolier(s) should be worn/weathered and any metal components should be dull/worn/scuffed. d. Two bandoliers are permitted and can be worn in any number of configurations. 6. Boots a. Boots (and lower legs) should be wrapped in a similar fabric as the robe/hood and be a similar color. b. Boots/wrapping should extend to the mid calf (or high enough so that no skin is visible). 7....

    read more

    Ewoks

    Ewoks

    CHARACTER DESCRIPTION Ewoks were sentient, diminutive, furry bipeds native to the forest moon of Endor. They were most notable for helping the Rebel Alliance defeat the forces of the Galactic Empire at the Battle of Endor, allowing the shield generator there to be destroyed, and in turn, the second Death Star. Ewoks were curious individuals that stood about one meter tall; they were omnivorous and used spears, slings, and knives as weapons; they also used hang gliders, battle wagons, and bordoks as vehicles. Although extremely skilled in forest survival and the construction of primitive technology like gliders and catapults, the Ewoks had yet to progress past stone-level technology when discovered by the Empire. They were quick learners, however, when exposed to advanced technology with simple mechanical processes and concepts. Source: Wookiepedia. REQUIRED ITEM 1. Short brown, gray, or black fuzzy fur. Fur may be solid colored or striped as seen on screen. Fur should be matte (not shiny) and have a rough look to it. 2. Suit should not have visible closures or lines (seams). Suit should fit the wearer or be padded, as Ewok’s skin does not ‘sag’. 3. Two fingers and thumb on the hand; three toes on each foot. 4. Dark brown or black eyes. Eyes should not appear to be ‘lined’ with a distinct edge, but should blend in with the fur/skull as seen in the movie. 5. Hood or skull headgear made of leather or leather-like material, can be decorated with additional leather wraps, beads, faux bone, etc. 6. Facial features should reflect as much accuracy as possible in replicating on-screen Ewoks. Padding and stuffing may be used to increase the ‘roundness’ of the face inside the headgear. 7. Nose made of Sculpey or similar material in the proper shape as seen in the movie. 8. Mouth made of Sculpey or similar material in the proper shape as seen in the movie. 9. 2 to 4 teeth in mouth made of Sculpey or similar material in white or off white color. OPTIONAL ITEMS 1. Ewok may carry a weapon of choice (where permitted by law): spear made of wood with faux stone tip, sling, or non-store bought bow. Weapons should appear to have been hand made by creatures that live in the woods. 2. As an alternative, Ewoks can carry a walking stick or Shaman’s stick, decorated as desired. 3. Leather bags/pouches, appearing to have been hand made by creatures that live in the woods, are also allowed. Standard effective for costumes submitted after 6/1/12. Approved by Costume Standard Committee & LMO 5/18/12. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    See-Threepio (Classic Trilogy)

    See-Threepio (Classic Trilogy)

    CHARACTER DESCRIPTION C-3PO, sometimes spelled See-Threepio and often referred to as Threepio, was a bipedal, humanoid protocol droid designed to interact with organics, programmed primarily for etiquette and protocol. He was fluent in over six million forms of communication, and developed a fussy and worry-prone personality throughout his many decades of operation. After being destroyed and discarded on the planet Tatooine before 32 BBY, C-3PO was rebuilt; his salvaged nature gave him special qualities that distinguished him from similar droid models. Along with his counterpart, the astromech droid R2-D2, C-3PO constantly found himself directly involved in pivotal moments of galactic history, and aided in saving the galaxy on many occasions. C-3PO considered various droids and organics to be friends of his, and was very dedicated to them, as well as to any master that he served. Source: Wookipedia REQUIRED ITEMS Complete set of chrome gold or weathered gold metallic protocol droid armor with accurate details Wires in midsection Lower right leg should be silver No exposed skin COSTUME RESOURCES TK-409 See-Threepio page Parts of Star Wars See-Threepio page C-3PO Builders forum Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    See-Threepio (Ep III)

    See-Threepio (Ep III)

    CHARACTER DESCRIPTION C-3PO, sometimes spelled See-Threepio and often referred to as Threepio, was a bipedal, humanoid protocol droid designed to interact with organics, programmed primarily for etiquette and protocol. He was fluent in over six million forms of communication, and developed a fussy and worry-prone personality throughout his many decades of operation. After being destroyed and discarded on the planet Tatooine before 32 BBY, C-3PO was rebuilt; his salvaged nature gave him special qualities that distinguished him from similar droid models. Along with his counterpart, the astromech droid R2-D2, C-3PO constantly found himself directly involved in pivotal moments of galactic history, and aided in saving the galaxy on many occasions. C-3PO considered various droids and organics to be friends of his, and was very dedicated to them, as well as to any master that he served. Source: Wookipedia REQUIRED ITEMS Complete set of chrome gold or weathered gold metallic protocol droid armor with accurate details Wires in midsection No exposed skin COSTUME RESOURCES TK-409 See-Threepio page Parts of Star Wars See-Threepio page C-3PO Builders forum Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    See-Threepio (Episode II)

    See-Threepio (Episode II)

    CHARACTER DESCRIPTION C-3PO, sometimes spelled See-Threepio and often referred to as Threepio, was a bipedal, humanoid protocol droid designed to interact with organics, programmed primarily for etiquette and protocol. He was fluent in over six million forms of communication, and developed a fussy and worry-prone personality throughout his many decades of operation. After being destroyed and discarded on the planet Tatooine before 32 BBY, C-3PO was rebuilt; his salvaged nature gave him special qualities that distinguished him from similar droid models. Along with his counterpart, the astromech droid R2-D2, C-3PO constantly found himself directly involved in pivotal moments of galactic history, and aided in saving the galaxy on many occasions. C-3PO considered various droids and organics to be friends of his, and was very dedicated to them, as well as to any master that he served. Source: Wookipedia REQUIRED ITEMS Complete set of gray and rust-colored protocol droid armor with accurate details Wires in midsection No exposed skin   COSTUME RESOURCES TK-409 See-Threepio page Parts of Star Wars See-Threepio page C-3PO Builders forum Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Imperial Knight

    Imperial Knight

    The Imperial Knights, formally the Knights of the Empire, were an order of Force-practitioners loyal to the Emperor of the Fel Empire. They were fully trained in the ways of the Force and rejected the dark side of the Force, unlike previous Imperial Force-based organizations. Source: Wookieepedia

    read more