Expanded Universe




  • Juhani (Knights of the Old Republic)

    Juhani (Knights of the Old Republic)

      CHARACTER DESCRIPTION Juhani was a Cathar female and a Knight in the Jedi Order during the Jedi Civil War. Juhani grew up on the planet Taris after her family escaped the assault on their homeworld during the Mandalorian Wars. In addition experiencing great hardship and xenophobic discrimination, Juhani was sold into slavery after the death of her parents in order to pay off their debts. Juhani was eventually discovered to be Force-sensitive by the Jedi Knight Revan, and freed from her servitude. She then made her way to the Jedi Enclave on Dantooine and was accepted for Jedi training by Jedi Master Quatra..  (Source: Wookieepedia) REQUIRED ITEMS 1. Teal matte body suit. Body suit must not be baggy or have any visible closures. The only skin that should be visible are hands and face. 2. Leather or leather-like medium browns vest, hip length. two center front panels taper down the front, wider at the shoulder than the waist with a center front closure in the darker medium brown, clasped with three thin metal clasps silver or light gold in color. There are two lighter brown side panels and a single knee-length ‘tail’ panel in the back in the darker medium brown. There must be an accurate layered collar piece with no center front seam and a high, rounded collar. 3. Leather or leather-like ovular shoulder pauldrons with rounded tube-like edging and two decorative panels on top. Pauldrons should match the darker color(s) of the vest. 4. Leather or leather-like arm guards with rounded rectangular decoration on the forearm extending from the elbow and stopping short of the wrist. 5. Knee-high boots, spats, or boots/spats combination in the same color as the vest. Boots should have heels no higher than 2 inches (5 cm). The back of the leg should have ribbed-looking texture while the front should appear leather-like. There should be four thin straps of a slightly darker brown color across the back of the boot leg without visible clasps. 6. Thin brown leather or leather-like belt with a rectangular shiny belt buckle (silver or light gold color). One brown leather or leather-like belt pouch on the right hip. The belt and pouch should be a darker brown color.  7. Lightsaber; blue/cyan colored blade if blade is present. 8. Head must appear to be bald except for a high ponytail. The ponytail should be held up with a metallic gold wrapped cord or stacked gold rings at the base. Ponytail hair should be separated into many thin braids, no fewer than 8 individual braids. Each braid should be tipped with a long, cylindrical gold bead. Natural hair colors only, black or dark brown recommended. Bald caps, if used, must be applied neatly and should be made up naturally so as not to look obvious. 9. Brown tabby cat stripes on the front and back of the head in either makeup or imitation fur. 10. Costumer should wear slightly pointed ears. Ear tips should match the costumer’s skin tone and applied neatly with makeup so that seams are not obvious. COSTUME RESOURCES KJO Detachment page Standard written by Author: Jenna (SongOfAmazon) Standard reviewed by the Costume Standards Committee 5 July 2016 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will...

    read more

    Ord Mantell Officer (Star Wars: TOR)

    Ord Mantell Officer (Star Wars: TOR)

      CHARACTER DESCRIPTION Star Wars: The Old Republic is a massively multiplayer online role-playing game (MMORPG) based in the Star Wars universe. Source Wookieepedia REQUIRED ITEMS 1. Shirt: Burnt orange, short sleeved shirt with collar and black yoke. Shirt has a double seam down the center front, no visible buttons. Sleeves should end no longer than two inches above the elbow. Yoke extends to the back of the shirt, and ends approximately at the shoulder blades. Right sleeve has a three dimensional pocket with a flap that closes with a snap. This pocket should be black. Rank pins on collar. Long black under sleeves. Yoke, pocket, and undersleeves should be the same shade of black, preferably the same fabric. 2. Trousers: Close fitting black pants with panel or pocket on the side of each thigh. Should be the same shade of black as the under sleeves and shirt yoke. No front or rear pockets. 3. Belt: Black leather, 2.5 to 3 inches wide. Large metal buckle, rectangular shaped. 4. Boots: Black leather or leather like, flat heeled boots.  No visible zippers or buckles.  Boots should end below the knee (approx 11-13 inches tall). Narrow strap around right boot holds metal colored flares. 5. Chest Harness: Leather or leather like straps as shown (holster and pistol optional). 6. Gloves: Black gloves with a flared wrist, and black bracers. 7. Crotch Harness: Leather or leather like straps as shown. 8. Pouches: Two medium sized (approx 4 x 6) black leather pouches with flaps that close with a snap. OPTIONAL ITEM OPTION TO BE GENERAL VANDER: 1. Black shoulder armor on left side extends to hem of the left sleeve. 2. Accurate hair. 3. Cybernetic implant above left eye. COSTUME RESOURCES Rebel Commanders forum Standard reviewed by the Costume Standards Committee 15 August 2015 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Ilum Officer (Star Wars: TOR)

    Ilum Officer (Star Wars: TOR)

      CHARACTER DESCRIPTION Star Wars: The Old Republic is a massively multiplayer online role-playing game (MMORPG) based in the Star Wars universe. Source Wookieepedia REQUIRED ITEMS 1. Shirt: Medium gray, short sleeved, pull over shirt with collar. Sleeves should be no longer than two inches above the elbow. Right sleeve has a three dimensional pocket with a flap that closes with a snap. This pocket should be gray, the same fabric as the shirt. Rank pins on collar. Long dark gray under sleeves with a patch near each wrist, and a metallic embellishment at the wrist, as shown. Under sleeves and pants should be the same shade of gray, preferably the same fabric. Each shoulder has a patch of a golden brown material as shown. 2. Trousers: Close fitting dark gray pants, no front or rear pockets.  Left side has a patch pocket, approx 4 inches wide with a flap with a snap closure. 3. Belt: Medium gray leather, 2.5 to 3 inches wide.  Large metal buckle, rectangular shaped.  There are six vertical metallic embellishments evenly spaced. 4. Boots: Medium gray leather or leather like spats over brown or black flat heeled boots. No visible zippers or buckles. Boots should end below the knee. (Approx 11-12 inches tall). Narrow strap around right boot holds three metal colored flares. 5. Chest Harness: Leather or leather like straps as shown (pistol optional). 6. Gloves: Medium to dark brown leather gloves, wrist length, with flared wrist. OPTIONAL ITEM OPTION TO BE SUPREME COMMANDER RANS: 1. Dark gray shoulder armor on left side extends to hem of the left sleeve. 2. Black hair and goatee. COSTUME RESOURCES Rebel Commanders forum Standard reviewed by the Costume Standards Committee 15 August 2015 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Coruscant Officer (Star Wars: TOR)

    Coruscant Officer (Star Wars: TOR)

      CHARACTER DESCRIPTION Star Wars: The Old Republic is a massively multiplayer online role-playing game (MMORPG) based in the Star Wars universe. Source Wookieepedia     REQUIRED ITEMS 1. Shirt: Tan short sleeve pullover shirt with collar. Sleeves should end no longer than one inch above the elbow. Each sleeve has a band of darker tan material, approx. 1 – 1.5 inches wide. Shirt has a three dimensional pocket on the right sleeve, with a flap with a snap closure. The left sleeve has a patch of the same color fabric. Each shoulder has a patch of a golden brown material as shown. Tan undersleeves. Rank collar pins. 2. Trousers: Close fitting tan pants with a pocket on the side of each thigh.  Pocket is approx. 3-4 inches wide has a pointed bottom and a flap with a snap closure. No front or rear pockets. Pants should be the same shade of tan as the shirt, preferably the same fabric. 3. Belt: Tan leather, 2.5 to 3 inches wide.  Large metal buckle, rectangular shaped, with a leather edging. There are six vertical metallic embellishments evenly spaced. 4. Boots: Brown leather or leather like, flat heeled boots. No visible zippers or buckles. Boots should end just below the knee. (Approx 12 inches tall) Narrow strap around right boot holds three metal colored flares. 5. Chest Harness: Leather or leather like straps as shown here (holster and pistol optional). 6. Gloves: Medium to dark brown leather gloves, wrist length, with flared wrist. OPTIONAL ITEM 1. White hair pulled into bun at the upper back of head for General Garza.   COSTUME RESOURCES Rebel Commanders forum   Standard reviewed by the Costume Standards Committee 15 August 2015 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Rebel Captain (Star Wars Miniatures game)

    Rebel Captain (Star Wars Miniatures game)

    CHARACTER DESCRIPTION Star Wars Miniatures is a 34mm scale collectible miniatures tabletop game based on the Star Wars fictional universe that was produced by Wizards of the Coast.  The game was originally released in September 2004 and continued production until May 2010.  Star Wars Miniatures players build point-based squads from one of ten different in-universe factions then conduct battles between those squads. The game mechanics are a simplified version of the d20 roleplaying game system.  Multiple maps, scenarios, and set themes from different settings and time periods from within the Star Wars universe are available.  The Rebel Captain was one of the featured characters of the game. Source Wookieepedia REQUIRED ITEMS 1. Screen accurate Fleet Trooper helmet: a) Helmet may be white or light dove gray. b) Helmet should have a visor, either transparent smoke color or solid black. i) Visor may be fixed in the upper position, or be movable to cover the face. c) A communication box on the left side is required, antennae is optional. 2. Screen accurate Rebel Fleet Trooper Shirt: a) Long-sleeve light blue work shirt with bib in front (blue chambray or blue oxford cloth) i) bib should cover front of shirt with no gaps at the bottom) b) Screen accurate is no cuffs, shirts are accepted with a cuff. c) The bib covers all buttons, including the one at the neck. i) A button down collar is not acceptable. 3. Black leather or leather-like mid-calf, flat or low heeled boots: a) Shaft should be 11-13 inches tall. b) No visible zippers. No straps or buckles are permitted. 4. Khaki/tan pants with solid black stripe on outside of each leg: a) Cargo pants are not permitted. 5. Accurate khaki/tan jacket with brown shoulders (yoke) and four pockets in front. 6. Rank Badge consisting of a square silver background with five raised blue dots. 7. Dark tan or light brown leather or leather like belt (Tandy Canyon tan or range Tan recommended) with silver rectangular or octagonal buckle. Belt should be two to two and half inches wide. No ornamentation.   OPTIONAL ITEM 1. Accurate DH-17 and holster. Holster must match the belt.     COSTUME RESOURCES Rebel Commanders forum Standard reviewed by the Costume Standards Committee 7 July 2015 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Mara Jade (Green dress)

    Mara Jade (Green dress)

    Mara Jade Skywalker was, during different times in her life, an Emperor’s Hand, a smuggler, and later a Jedi Master who sat upon the Jedi High Council. She was raised as a servant to Emperor Palpatine and became a high-level Force-using operative. After Palpatine’s death, she received his last command, which was to kill Luke Skywalker; however, the death of her Master caused her to go rogue. Eventually she joined smuggler chief Talon Karrde, becoming one of his best smugglers and his second-in-command. During the predations of Grand Admiral Thrawn, she was forced to work with Skywalker, and developed a grudging respect for him. During the Galactic Civil War, Mara Jade proved herself skilled in a variety of fields; she was a good pilot and mechanic and trained in the use of both a blaster and hand-to-hand combat even without relying on the Force.

    read more

    A’Sharad Hett (Before/After Order 66)

    A’Sharad Hett (Before/After Order 66)

    Darth Krayt, born A’Sharad Hett, was a Human male who served as a Jedi Master in the waning days of the Galactic Republic.  The son of legendary Jedi Knight Sharad Hett and his wife K’Sheek, both of whom lived among the Tusken Raiders of Tatooine, he eventually became the Padawan of Jedi Masters Ki-Adi-Mundi, and later, An’ya Kuro.

    read more

    Marasiah Fel (White Dress)

    Marasiah Fel (White Dress)

    CHARACTER DESCRIPTION

    Marasiah Fel, affectionately known as Sia, was a female Human princess and Imperial Knight who is the daughter of Emperor Roan Fel and Empress Elliah Fel until she became the first Empress of the Fel Empire during the end of the Second Imperial Civil War against the Dark Lord of the Sith Darth Krayt and the One Sith.  Through her father, Princess Fel was a great-granddaughter of Jagged Fel, the first Emperor of the Fel dynasty. She was also a distant cousin of Ania Solo.  Like her father, Fel possessed astrong connection to the Force, thus enabling her to join the Knights of the Empire.  The lover of fellow Imperial Knight Antares Draco, she was captured by the One Sith and taken to Korriban, where Draco nearly died in an attempt to rescue the woman he loved.

    read more

    Mara Jade (as Arica- Blue dancing dress)

    Mara Jade (as Arica- Blue dancing dress)

      CHARACTER DESCRIPTION Arica was the alias used by Mara Jade when she infiltrated Jabba’s Palace in 4 ABY.  Disguised as a dancer, her goal was to get close enough to Luke Skywalker to kill him, as Palpatine had ordered her to. Source Wookieepedia   REQUIRED ITEMS 1. Dress: a. Sleeveless top made of black fishnet material. b. The top has a blue fabric applique sewed onto the chest.  The applique resembles a pair of “wings” with five finger shapes extending from each side of the applique.  In the center of the applique, there is a black stitched circular design with a line going down through the center.  There are also two black stitched triangular designs on the top of each wing. c. Two skirt panels (made of the same blue fabric as the chest applique) that are ankle length.  The skirt panels are front and back, but still connected to each other on the sides.  The pieces of the skirt connected at the sides have decorative belt loops (one at each side. A second belt loop on each side is optional).  The skirt panels must be of a fabric that drapes and flows nicely. 2. Cape: a. The cape is a wide rectangular cape that can be made of the same fabric as the skirt and chest applique, or it may be sheer. b. Two thin, black or silver elastic bands hold the cape to the costumer’s upper arm (one band per arm) and two silver bracelets connect the cape to the costumer’s wrists (one bracelet per wrist). 3. Leggings/stockings: a. The leggings/stockings are black in color. b. They should begin at mid-thigh length and reach the ankles 4. Circlet: a. The circlet is thin and silver. b. Circlet should encircle the forehead. c. The circlet has decorative gems located on each temple. 5. Hair: a. The hair is slightly wavy. b. The hair may reach from the shoulders to mid-back in length.   OPTIONAL ITEMS 1.  Black or silver sandals.  These are recommended (but not required) while trooping to protect the costumer’s feet 2.  A necklace that is just above the neckline of the top and has decorative triangular accents attached to it. 3. Garter belts at the top of each legging/stocking.  The garter belts are black and have decorative silver, oval-shaped designs spaced among the belt.     COSTUME RESOURCES Sewsewing website     Standard reviewed by the Costume Standards Committee 23 March 2015   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    SWTOR Relnex style Jedi Robes

    SWTOR Relnex style Jedi Robes

    CHARACTER DESCRIPTION

    The Jedi Order, later known as the Old Jedi Order and referred to as the Holy Order of the Jedi Knights, was an ancient monastic peacekeeping organization unified by its belief and observance of the Force, specifically the light side.

    read more

    Corran Horn

    Corran Horn

      CHARACTER DESCRIPTION Corran Horn was a Force-sensitive Human male Corellian pilot who served as a Corellian Security Force investigator, a Rogue Squadron ace and New Republic hero, and later a Jedi Master of the New Jedi Order. Source Wookieepedia   REQUIRED ITEMS 1.  Green flightsuit: A medium value, natural green, nothing very saturated: • Code cylinder pocket on outside of upper-middle left arm • Rectangular pocket with a flap closure on upper-middle right arm. Flap should be rectangular shaped • Comm pad pocket on outside of left forearm above wrist • Thigh pockets with rectangular flap closures (upper set required, lower set optional) • No visible zippers or snaps • Mandarin-style collar with pointed tab closure. Collar closes from left to right with the exposed tab on the right side of the throat • Cuffs should close in a similar fashion as the Mandarin-style collar 2. Mid-calf black boots (Jack boots or engineer boots are acceptable): • Leather pull-on style preferred with low heels • Boots should be largely unadorned. No laces or ankle buckles (small buckle at top edge of boot allowable if covered by blousing) • No non-black zippers. Any zipper closure must either be hidden or on the inside of the boot (that is, front and outside zippers are not permitted) • High-Calf boots are acceptable with sufficient blousing of the flightsuit legs 3. Silver/grey leg flares in an olive drab or black leg-band holder: • Maximum of 8 flares per holder • Flares and flare holder should be approximately 4″ (inches) long • Metal leg flares are preferred, but other materials are permitted as long as, when finished, give the appearance of being silver metallic in appearance • Leg flares should be spaced equidistant around the leg • Leg flares should be worn on the left leg and should be positioned to so the bottom edge of the leg flare is resting on the top of the boot (that is, no gap between the flare holder and the top of the boot) 4. Light grey/silver grey ejection harness and web belt: • Harness and belt are made of strapping material that is 2″ (inches) wide • Front and back straps extend up the torso under the flack vest and are secured to either the flightsuit or to the inside the flak vest panels.  Attachment must be hidden by the flak vest.  The lower part of the harness should fall (or loop) just below the inseam (or crotch area) • Two loops of strapping are connected to the front-back strapping (at the lowest part of the front-back loop) and loop around each leg, drooping no lower than the knees • The belt is worn over the front/back harness strap and is closed with a silver/gray “cargo slide” (or roll pin) style buckle.  The free end of the belt is looped around the slide so that the excess belt is on the underneath/inside of the belt, not on top/outside of the belt.  The right side of the belt contains 6 (six) vertical loops for mini-flares.  Mini-flares are made of metal or other materials that, when finished, have a metallic silver appearance.  A mix of filled and empty slots is acceptable. 5. Flak Vest, consists of white front and back cloth (ballistic nylon or similar fabric) panels, contoured to fit...

    read more

    Satele Shan

    Satele Shan

    CHARACTER DESCRIPTION

    Satele Shan was a human female who served as the Jedi Order’s Grand Master during the Cold War and the Galactic War between the Galactic Republic and the Sith Empire.  The daughter of Jedi Knight Tasiele Shan, who was herself a descendant of the legendary Jedi Knights Revan and Bastila Shan, Satele was born on the planet Brentaal IV in the year 3699 BBY.  Inheriting her family’s Force-sensitivity, she was inducted into the Jedi Order and became the Padawan of Jedi Master Ngani Zho, though she later traveled to the Sith homeworld of Korriban to study under the Zabrak Battlemaster Kao Cen Darach.

    read more

    Generic KOTOR I Jedi

    Generic KOTOR I Jedi

    CHARACTER DESCRIPTION

    KOTOR I Generic Jedi Generic Jedi Knights Of The Old Republic from the computer game.

    read more

    Luke Skywalker (Jedi Academy Robes)

    Luke Skywalker (Jedi Academy Robes)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Mara Jade (Black Jumpsuit)

    Mara Jade (Black Jumpsuit)

    Mara Jade Skywalker was, during different times in her life, an Emperor’s Hand, a smuggler, and later a Jedi Master who sat upon the Jedi High Council.

    read more

    Anakin Skywalker (Clone Wars Microseries)

    Anakin Skywalker (Clone Wars Microseries)

    CHARACTER DESCRIPTIONS

    Anakin Skywalker – was a Force-sensitive Human male who served the Galactic Republic as a Jedi Knight and later served the Galactic Empire as the Sith Lord Darth Vader. Born to the slave Shmi Skywalker in 41.9 BBY, Anakin was conceived by midi-chlorians, the symbiotic organisms that allowed individuals to touch the Force, and he and his mother were brought to the desert planet of Tatooine to be the slaves of Gardulla the Hutt.

    read more

    Galen Marek – Ceremonial Jedi Robes

    Galen Marek – Ceremonial Jedi Robes

    CHARACTER DESCRIPTION

    Galen Marek, codenamed Starkiller, was a male Human apprentice of the Sith Lord Darth Vader. A powerful Force-user who lived during the era of the Galactic Empire, Marek originated from the Wookiee home planet of Kashyyyk as the sole offspring of two Jedi Knights—Mallie and Kento Marek—who deserted the Jedi Order during the Clone Wars. Following the death of his mother, the young Marek’s father was killed in battle by Darth Vader. Though only a child, Marek possessed an exceptionally strong connection to the Force that the Dark Lord of the Sith sought to exploit.

    read more

    Galen Marek – Arena Standard, FU II

    Galen Marek – Arena Standard, FU II

    CHARACTER DESCRIPTION

    Galen Marek, codenamed Starkiller, was a male Human apprentice of the Sith Lord Darth Vader. A powerful Force-user who lived during the era of the Galactic Empire, Marek originated from the Wookiee home planet of Kashyyyk as the sole offspring of two Jedi Knights—Mallie and Kento Marek—who deserted the Jedi Order during the Clone Wars. Following the death of his mother, the young Marek’s father was killed in battle by Darth Vader. Though only a child, Marek possessed an exceptionally strong connection to the Force that the Dark Lord of the Sith sought to exploit.

    read more

    Galen Marek (Death Star Duel)

    Galen Marek (Death Star Duel)

    CHARACTER DESCRIPTION

    Galen Marek, codenamed Starkiller, was a male Human apprentice of the Sith Lord Darth Vader. A powerful Force-user who lived during the era of the Galactic Empire, Marek originated from the Wookiee home planet of Kashyyyk as the sole offspring of two Jedi Knights—Mallie and Kento Marek—who deserted the Jedi Order during the Clone Wars. Following the death of his mother, the young Marek’s father was killed in battle by Darth Vader. Though only a child, Marek possessed an exceptionally strong connection to the Force that the Dark Lord of the Sith sought to exploit.

    read more

    Rahm Kota – TIE Factory (Jedi)

    Rahm Kota – TIE Factory (Jedi)

    CHARACTER DESCRIPTION

    Rahm Kota was a Human male who served as a Jedi Master and General during the Clone Wars. Born on a war-torn world, Kota fought in the trenches during the planet’s internal conflicts from the age of ten. At the age of eighteen, Kota met the Jedi Mace Windu, who had been dispatched to the planet to end the conflict peacefully. Discovering Kota’s Force-sensitivity, Windu took Kota back to the Jedi Temple on Coruscant to be trained as a Jedi. Despite being well over the traditional age of acceptance, Kota was schooled in the Force by Master Yoda. He took Falon Grey as his Padawan sometime before the Clone Wars, training him to Knighthood. During the Clone Wars, Kota was made a general in the Grand Army of the Republic. He did not believe that clone troopers were fit for battle, however, and refused to lead them. Instead, he commanded his own militia, comprised of volunteers.

    read more