Episode VI




  • Malakili (Rancor Keeper)

    Malakili (Rancor Keeper)

      CHARACTER DESCRIPTION A human male, Malakili was born on Corellia, a planet of the Core Worldsbest known for its pirates, its fast starships, and skilled merchants.  Since his most tender childhood, the young Malakili was fascinated by wild animals, and he wished he could dedicate his life to taking care of them. Source Wookieepedia   REQUIRED ITEMS 1. Hood: a. The hood is made of a dark brown leather or leather-like material, and weathered to look black in places. b. The hood is approximately one square yard, cut to a similar shape as references. c. There is a split / seam on right side of head, used to shape to head. d. There are two long, loose laces hang down from seam. The hood has the appearance of being “stitched” together by hand with black lacing. e. The hood’s edges have a rough appearance. f. There is patchwork of lighter shade leathers on top of head at brow and down left side of head. g. Attached to the hood is 3/4″ to 1″ wide black “choker” around neck. The choker extends up behind the ears and attaches to inside of hood to keep hood in place. h. The hood appears dirty, sweat-stained and greasy. 2. Arm Bands: a. The armbands are 2-1/2″ wide heavy leather or leather-like material straps. They are dark brown in color and appear to be sweat-stained. b. The bands are worn on the biceps (just below the armpit) and wrap completely around the arm with no gaps. c. The edge of straps appear to be worn (either rounded or beveled). d. There is no visible closure. Any overlap used for closure faces to the back, under the arm. e. The armbands have three bronze-looking domes, approximately 2″ on diameter at the base. The domes are not perfect cups, but rather appear to be hand-crafted. Each dome has a “weld” detail around its base, approximately 1/8″ thick. The domes are equally spaced around the strap, on “points” of four, with the fourth space empty under the arm. f. Between each dome is a pair of silver studs. There are eight total. The center of studs are 1/2″ from the edge of the strap. The studs are a half-dome shape and silver, but are dirty and tarnished till almost black. 3. Vambraces/Forearm Guards: a. The arm guards are made from a heavy leather or leather-like material. They are dark brown in color. They appear sweat-stained. b. The center area of forearm has a lighter brown area in the center. c. The armgaurds are extended down to cover half if the back of the hand.The guards do not reach the knuckles. They are extended up to cover approximately 2/3 of the forearm. The guards do not reach the elbow. d. The edges of guards appear to be worn. Either rounded or beveled. e. There are seven studs circle the forearm. The studs are equally spaced and symmetrical. The center of studs are 1/2″ from the edge of the strap. The studs are a half-dome shape and silver, but are dirty and tarnished till almost black. f. There is a 2″ wide leather strap wraps around the wrist, over the top of the guard. g. There are two pairs of studs are on each side of the wrist strap,...

    read more

    Mon Mothma (Episode VI)

    Mon Mothma (Episode VI)

    CHARACTER DESCRIPTION Mon Mothma a native of Chandrila, was a female Human who served as an important political figure from the waning days of the Galactic Republic, one of the founders of the Alliance to Restore the Republic, and the first Chief of State of the New Republic. Source: Wookieepedia REQUIRED ITEMS 1. Ivory or cream colored tunic made from a soft, natural fabric, with a jewel-neck collar and wide, loose fitting sleeves. The length of the tunic must be at or just below the knee. The fabric should be heavy enough, or be lined, so that the under dress does not show through. Sleeves should be knuckle length before being pulled up to just above the wrist with a large sleeve fold that is tacked down. 2. Deep brown under dress, made from a soft, natural fabric such as jersey, with a full gathered skirt. The sleeves must be tight fitting and gathered at the wrists. A skirt and shirt is also acceptable. 3. A necklace consisting of two dull gray twisted cords, with a round, silver pendant, detailed as it appears in the movie, suspended from two smaller, twisted cords in the center. The necklace should be attached at each shoulder and end with the gray cord wrapped around a small, domed object, such as a button, with single strand of the large gray cord around the back of the collar. 4. Flat or low heeled (1″ or less) brown shoes or boots. No visible laces, buckles, or zippers, no spike heels. 5. Appropriately-styled hair shorn above the collar; naturally-occurring hair colors only.   COSTUME RESOURCES   Galactic Strategic Command forum     Reviewed on December 30, 2014.     PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here)     Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Luke Skywalker (Death Star Duel)

    Luke Skywalker (Death Star Duel)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Endor Strike Team)

    Luke Skywalker (Endor Strike Team)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Jabba’s Palace / Sarlaac Pit)

    Luke Skywalker (Jabba’s Palace / Sarlaac Pit)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Anakin Skywalker (Endor Ghost)

    Anakin Skywalker (Endor Ghost)

      CHARACTER DESCRIPTIONS Anakin Skywalker – was a Force-sensitive Human male who served the Galactic Republic as a Jedi Knight and later served the Galactic Empire as the Sith Lord Darth Vader. Born to the slave Shmi Skywalker in 41.9 BBY, Anakin was conceived by midi-chlorians, the symbiotic organisms that allowed individuals to touch the Force, and he and his mother were brought to the desert planet of Tatooine to be the slaves of Gardulla the Hutt. They soon ended up as the property of the Toydarian Watto, and Skywalker exhibited exceptional piloting skills and a reputation for being able to build and repair anything even at a young age. In 32 BBY, Skywalker encountered the Jedi Qui-Gon Jinn and Padmé Amidala, and he helped them secure the parts they needed for their starship by winning the Boonta Eve Classic podracing event—only to learn that he had also won his freedom in doing so. (Source: Wookiepedia) REQUIRED ITEMS 1. Floor length tan/linen outer tunic  2. Dark brown inner tunic (V-necked/PT-style, not OT Obi-Wan turtleck)  3. Dark brown robe  4. Proper OT-style Jedi belt and hair style  PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here)   Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Jedi Costume Standards (Generic)

    Jedi Costume Standards (Generic)

      CHARACTER DESCRIPTION A Jedi was a member of the Jedi Order, who studied, served and used the mystical energies of the Force; usually, the light side of the Force. The weapon of the Jedi was the lightsaber, a weapon with a blade made of pure energy. The Jedi fought for peace and justice in the Galactic Republic, usually against their mortal enemies, the Sith and Dark Jedi, who studied the dark side of the Force. (Source Wookieepedia)   REQUIRED: 1. Outer tunic (OT): a. Sleeved. Sleeves should hang at least to the knuckles when the arms are held down at the side. b. No Kimonos’s, karate/judo gi or gi like construction allowed. c. OTs may be sleeveless as long as an Inner Tunic (IT) is worn and is long sleeved. No bare-armed Generic Jedi. d. Sleeveless outer tunics may be fastened at the front and have an attached hood (recommended), though a hood is not compulsory. No vests, or sleeveless V-neck type sweaters may be worn as a sleeveless OT. A sleeveless OT should be surcoat or standard OT style in length. (Ki Adi Mundi and Sarrissa Jeng are examples of surcoat style OT’s.) e. Tabards should not be worn with Ki Adi Mundi style OT or surcoat. Tabards are required with the standard OT style. f. OT’s should have a collar approximately 1 inch to 2 inches wide. g. OTs overall length may be variable and may extend to the floor. OTs are generally made in a fashion where there is a full skirt (attached to the main body of the OT) where the seam is hidden by the obi. 2. Tabards: Must extend at least to or past the bottom hem of the OT on the front. The back tabards may end under the obi or may extend to (or past) the bottom hem of the OT (or may be the same length as the front tabards). This guideline is obviously for the more traditional length OTs. For OTs that are longer (past the knee or to the floor or where a full length skirt is worn), the tabard length would be more variable. a. Tabard construction should be such that the front tabards do not overlap. This is often accomplished by constructing the tabards in a “Y” formation where any seam joining the tabard below the obi to the tabard above the obi is covered by the obi. Tabards may cross in the back. Tabards may be sewn together in the back. b. Scarf-style tabards, having an around-the-neck design, are permitted. c. A single front tabard, centrally located (covering the crotch area) is permitted. d. The end of the front tabard(s) may have a variable design (square, rounded, triangular, octagonal, etc.) e. Tabards may have borders and/or varying decorative symbols or other decorations (such as Aurebesh, etc.). The decorations/designs should not obviously be from an Earth-bound period or culture (Renaissance, Celtic, Asian, tribal, etc.) f. Leather or pleather tabards are permitted. g. Tabard width should generally be from the seam at the collar of the OT to the edge of the shoulder and be a similar width as the obi. A general width to use would be 5 inches to 6 inches wide (depending on one’s height and build). Common sense should be used in...

    read more

    Leia Organa (Ewok Village gown)

    Leia Organa (Ewok Village gown)

      CHARACTER DESCRIPTION Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia) REQUIRED ITEMS: 1. Tan suede or suedecloth A-line dress reaching to the shins with a multi-length, multi-paneled skirt and princess seams. Short sleeved with a V-neck decorated with matching thin suede lacing crisscrossing down the lower half of the V-neck and tied. Matching thin suede lacing in crosses on the princess seams following along the whole length of the seam (to the waist) and the armhole seams. No grommets. 2. Tan suede or suedecloth sash tied around the waist and dangling down the middle. 3. White long sleeves of a natural-looking but crisp fabric and thin dark brown, charcoal gray or black suede or suede-like lace tied at the wrists. Long sleeves can be attached to the upper short sleeve of the dress but must be under the finished edge of the short sleeve with no visible stitching. 4. Flat tailored tan sandals (multi-strap or multi-lacing sandal styles preferred). 5. Long wavy hair (achieved on your own, or by extensions or a wig), pulled back off the face with a long braid that has thin tan suede lacing crossed around the braid. Naturally-occurring hair color only; no bangs. COSTUME RESOURCES: StormtrooperPrincess’ Leia Ewok Village Gown Tutorial Padawan’s Guide Leia Ewok Village Gown page SWFFAQ Leia Ewok Village Gown page  Revised October 21, 2012 Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Leia Organa (Endor Commando gear)

    Leia Organa (Endor Commando gear)

      CHARACTER DESCRIPTION Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia) REQUIRED ITEMS: 1. Tan or beige shirt, short sleeves reaching almost to the elbow with a wide cuff, folded up with a vented pocket and flap partially sewn to the outside of each sleeve. The pocket can be tucked beneath the cuff or lay over the cuff. 2. Medium gray vest with cap sleeves and decorative topstitching on the right-front and right-back yoke and around the bust. 3. Rank insignia on the front right breast. 4. Cool pale gray or pale blue twill pants, tailored with a natural waist height. A solid burnished yellow or gold non-shiny stripe about 1” wide on each side seam. 5. Low-heeled black leather or leather-like, non-shiny riding boots. Boots must be at least calf-high and loose-fitting; no zippers unless covered. 6. Black watch-like communication device on left wrist. 7. Camouflage colored poncho with shaped hood, in shades of green, cream and brown. Poncho should reach mid-thigh in front and knee-level in back. 8. Olive green 2” wide twill belt with a black metal slide in front, one black twill pouch on the left front, 2-3 black twill pouches in the back and black leather or non-shiny vinyl holster. 9. DDC Defender short-barrel blaster. 10.Hair in braids wrapped around head with a densely braided figure eight-style buns or two small braided buns in back. Naturally-occurring hair color only; no bangs. OPTIONAL ITEMS: Rebel Commando helmet COSTUME RESOURCES: Studio Creations Endor Commando Tutorial Parts of SW Endor Leia page StormtrooperPrincess’ Rebel Briefing Leia Tutorial Padawan’s Guide Leia Endor Costume page SWFFAQ Endor Leia page Blaster: drcollectables Blaster: King of Swords  Revised October 21, 2012 Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Leia Organa (Rebel Briefing uniform)

    Leia Organa (Rebel Briefing uniform)

      CHARACTER DESCRIPTION Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia) REQUIRED ITEMS: 1. Tan or beige shirt, short sleeves reaching almost to the elbow with a wide cuff, folded up with a vented pocket and flap partially sewn to the outside of each sleeve. The pocket can be tucked beneath the cuff or lay over the cuff. 2. Medium gray vest with cap sleeves and decorative topstitching on the right-front and right-back yoke and around the bust. 3. Rank insignia on the front right breast. 4. Cool pale gray or pale blue twill pants, tailored with a natural waist height. A solid burnished yellow or gold non-shiny stripe about 1” wide on each side seam. 5. Low-heeled black leather or leather-like, non-shiny riding boots. Boots must be at least calf-high and loose-fitting; no zippers unless covered. 6. Black watch-like communication device on left wrist. 7. Olive green 2” wide twill belt with a black metal slide in front, one black twill pouch on the left front, 2-3 black twill pouches in the back and a black leather or non-shiny vinyl holster. 8. DDC Defender short-barrel blaster. 9. Hair in braids wrapped around head with a densely braided figure eight-style bun in back. Naturally-occurring hair color only; no bangs. COSTUME RESOURCES: StormtrooperPrincess’ Rebel Briefing Leia Tutorial Padawan’s Guide Leia Endor Costume page SWFFAQ Endor Leia page Blaster: drcollectables Blaster: King of Swords  Revised October 21, 2012 Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Leia Organa (Slave outfit)

    Leia Organa (Slave outfit)

      CHARACTER DESCRIPTION Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia) REQUIRED ITEMS: 1. Bra a. The bra is a burnished Gold/Copper/Brass Metallic Bikini top with a humped curvature on the side of each bra “cup” with another similar shaped curvature inside of the bra cups. b. The bra has an underpiece below the bra cups with two “arms” extending from the sides. c. The bra has thin black or brown leather or elastic cording straps that criss-crosses in the back and attaches at the top of the bra cups and sides of the bra’s underpiece. The straps have two burnished golden/copper/brass metallic tear-drop shapes on them in the front of the bikini. d. The bra cups are lined with suede fabric in the following approvable colors: olive green, medium gray, or dark taupe. 2. Bikini Bottom a. The bikini bottom is made up of two burnished gold/copper/brass metallic plates, one in the front area below the belly button, and one in the back that covers the buttocks. b. The plates are slightly semi-circle shaped and slightly narrow towards the bottom. c. The plates have two orb shapes on each side and two curved designs below the orb shapes. The designs are surrounded by many decorative bumps and ridges. d. The plates are connected by black or brown elastic or leather strips connected to burnished gold/copper/brass metallic oval shaped loops on each side of the hips. e. The belly button should be exposed. 3. Skirts a. There are two gathered skirt panels, one connected to each plate. b. The skirts should be in the following approvable colors: burgundy, wine, berry purple. c. The skirts are an opaque, non-shiny smooth fabric that reaches down to the ankles. No crushed velvet. 4. Armband a. A burnished gold/copper/brass metallic coiled snake shaped armband is worn on the upper left arm. b. The armband’s snake coils are connected and not loose. c. The armband should have small detailed bumps for accuracy. 5. Bracelet a. A large burnished gold/copper/brass metallic cuff bracelet is worn on the right wrist. b. The bracelet has a hole in the middle of it and with two small decorative orb shapes on each side of the hole. c. The bracelet has ridge designs toward the end extending in the direction of the forearm. 6. Boots a. Suede or faux suede flat or low heeled boots (heels should be no higher than half an inch.) b. The boots should come in the following approvable colors: medium or light gray, olive green, or dark taupe. The boots should be about similar in color to the bra suede lining. c. The boots are cut on a diagonal angle, and are high in the back (reaching up to...

    read more

    Leia Organa (Boushh disguise)

    Leia Organa (Boushh disguise)

      CHARACTER DESCRIPTION Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia) REQUIRED ITEMS: 1. Proper brown weathered helmet with tan deerskin snout, a silver flanking nose “combs” and two dark green visors, and a stitched strap at the back, weathered with proper greeblies and painting. 2. Brown weathered shoulder armor with gray metallic tanks (the left tank longer than the right tank) and a weathered greeblie (comlink) center front below the collar with reddish lettering. Tanks should be weathered with proper niches, greeblies, handle, spout, and reddish lettering. 3. Bandolier of gray twill belting with proper weathered greeblies and small canisters. 4. Beige or tan weathered suede or suedecloth mid-thigh-length tunic with a V-neck, a center front opening and large sleeves reaching just below the elbows. No visible closures or fastenings. 5. Tan leather or leather-like hip-length tunic with a dark brown suede or suedecloth turtleneck collar and dark brown suede or suedecloth sleeves worn beneath the outer tunic. Sleeves are styled to fingerless gauntlets with 8 spike studs at each knuckle in a triangular pattern. 6. Beige or tan semi-circular weathered cape of herringbone or other heavy woven material. 7. Beige or tan suede or suedecloth gloves to wear underneath studded gauntlets. 8. Medium or dark brown wide suede or suedecloth obi with a ribbed texture (rope quilting preferred). 9. Tan leather belt with a dark gray rectangular buckle. 10. Tan weathered leather or leather-like pants with two seams above kneecap. Crinkle/pleated/gathered texture to the leather across front below kneecap seam. 11. Beige or tan weathered boot spats with vertical quilting lines and round silver greeblies to be worn one on each outside ankle. 12. Beige or tan flat-soled boots or shoes to wear under the boot spats. 13. Hair pulled back into a long single braid. Naturally-occurring hair color only; no bangs. OPTIONAL ITEMS: Tall blaster rifle Proper round thermal detonator ”1138” in red lettering on the upper right side of the helmet COSTUME RESOURCES: Parts of SW Boushh Disguise page Padawan’s Guide Leia Boushh page SWFFAQ Leia Boushh page  Revised October 21, 2012 Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Endor Commando/ Rebel Soldier/ Trooper

    Endor Commando/ Rebel Soldier/ Trooper

    CHARACTER DESCRIPTION Endor Commando/Endor Rebel Soldier/Endor Trooper – These troopers accompanied Han Solo, Leia and Chewbacca to the forest moon of Endor in order to destroy the shield generator that was protecting the second Death Star thereby allowing the Rebel Fleet to destroy it. The troopers were caught in a trap set forth by the Emperor but managed to overcome the odds and complete the mission.   REQUIRED ITEMS 1. Cargo style pants – (commercial BDU in rip stop or twill is acceptable-no sewing modifications needed) spray painted in a camouflage pattern A NOTE REGARDING CAMO FOR ALL PIECES CALLING FOR CAMOUFLAGE: Suggested paint colors below are “Design Master Corp” paint designations, an equivalent is acceptable- Moss Green (heavy) – Holiday Green (light) – Hunter Green (light) – Basil (heavy…primary color) – Bright Olive – (small accents) 2. A beige/tan/sand coloured long sleeve t-shirt  3. Boots: “Desert” style combat or hiking boots. Canvas/Natural upper Target Color: “Sand” FS 33531/RAL 1011 “Brown Beige”; Molded sole, with thick “lug” tread. The sole continues up over the front ½”/12mm of the toe. The original “Sierra” brand boots are long out of production; however there are Israeli Scout Commando Boots that are very close in design and can be either purchased or used as a reference. 4. Gaiters:  A tube of heavy Cotton/Natural fabric starting from the bridge of the foot (covering most of the laces) continuing up past the boot top to slightly below mid-calf. 5-8 sets of eyelets (depending on your measurements). No clear photos of the laces have been found yet; most likely surplus olive-green “para-cord” was used. Color: The originals appear to have been made from a tan or sand material, but were so heavily dyed and painted to appear used they look dark brown or olive when actually seen on screen. 5. Helmet: Consisting of an AN-H-15 cloth helmet (or replica) with a ribbed strip on the top, a replica rigid outer ring, and cloth bill 6. Olive Drab Belt with pouches  7. Short, light-colored leather work gloves  8. The following combinations are acceptable for formal for the upper torso in addition to the tan long sleeved shirt: A camo painted trenchcoat – camo paint should be applied to a tan trenchcoat, if tan trenchcoat/lab coat can not be obtained, you will have to dye trenchcoat/labcoat tan first and then camo paint. A camo painted snow jacket – camo paint must be applied to a tan base. Since snow jackets are by nature white in color, you must dye jacket tan first. Accurate capped sleeve vest with slash pockets and padded applique on right upper chest. Accurate capped sleeve vest with slash pockets and padded applique on right upper chest worn over a camo painted snow jacket. 9.Formal Requirements – choose one: (Unless local laws prohibit or strongly discourage carrying anything that looks like a firearm)  E-11  DH-17  Endor rifle Optional Items: 1. Web bandolier with replica accessories 2. Canvas military-style backpack-no nylon packs-screen accurate is two pocket pack. 3. Endor hardpack 4. Vest accessories such as rank badges and wrist comm. Resources: Studio Creations Endor Rebel Soldier Tutorial Sunrider Base Endor Trooper Forum Endor Bunker Yahoo! Group Build Your Own Endor Commando PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges...

    read more

    Endor Gunner

    Endor Gunner

      CHARACTER DESCRIPTION Endor Gunner – These gunners accompanied Han Solo, Leia and Chewbacca to the forest moon of Endor in order to destroy the shield generator that was protecting the second Death Star thereby allowing the Rebel Fleet to destroy it. The gunners were caught in a trap set forth by the Emperor but managed to overcome the odds and complete the mission.   REQUIRED ITEMS 1. Gray or tan jumpsuit with 4 leg pockets in front and a tabbed closure collar and tabbed closure on sleeves. OR Gray jumpsuit with regular buttoned up pointed collar and 4 leg pockets in front.  2. Olive drab military style canvas/strapping belt  3. At least 2 olive drab pouches  4. Endor capped sleeved vest with quilted portion on upper right and slash pockets.  5. Rank badge  6. short gloves (tan, brown, or deerskin)  7. Tan gaiters with a seam down the front, siver strapping at top, and small black triangle to the inner part of gaiters.  8. Black round toe boots or shoes  OPTIONAL ITEMS 1. Headset 2. Weathering on capped sleeved vest 3. Endor headgear   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    B-Wing pilot (Episode VI)

    B-Wing pilot (Episode VI)

      CHARACTER DESCRIPTION B Wing Pilot – A pilot, sometimes called a flyboy, directly controlled the operation of a vehicle while located within the same craft. A pilot was often assisted by a copilot, navigator, astromech droid, weapons officer, or other crew members. The term “pilot” was applied across vehicles used on land or in water, air, and/or space. The military designation for a pilot was PL-1. Whether this applied to all pilots or only starfighter pilots is unknown. On smaller ships, the word pilot and captain were interchangeable, but on larger vessels, the pilots were rarely the commanders of the vessels. (Source: Wookiepedia) REQUIRED ITEMS 1. Red flightsuit with open collar (folded down) Correct arm pockets (shaped code cylinder pocket on upper left arm Rectangular pocket with a squared-flap closure on upper right arm), and thigh pockets with squared-flap closures (upper set required, lower set optional) No visible zippers or snaps Black undershirt only required if visible by collar 2. Light Tan, Beige, or Taupe cloth or canvas spats over black boots Leather spats are not acceptable Spat height should be mid-calf to just under the knee and fall all the way down Spats should feature an additional strap (w/no buckle) of the same or similar material, running around the length around the calf approximately 1/8-1/4 down from the top of the spat Spats may feature single or double seam running down the front or back No laces should be visible 3. Boots should be mid-calf black boots (Jack boots or engineer boots are acceptable. Leather pull-on style preferred with low heels No laces No ankle buckles (small buckle at top edge of boot allowable if covered by blousing) No non-black zippers Any zipper closure must either be hidden or on the inside calf No zippers on front or outside calf of boots High-Calf and Low-Calf boots are acceptable if fully covered by the spats 4. White ejection harness and web belt, all 2” wide Belt may be off-white and is to buckle at the back with a black snap-release buckle Leg loops are individual per leg and split at the wais Harness should attach to the drop point at the bottom of the front of the flak vest 5. Scoop-necked black, charcoal or dark grey cloth or canvas flak vest with two raised ribs above chest box Small black plastic snap-release buckles on the shoulder straps and a drop-point on the front panel for attachment of ejection harness Side strapping should be white and 1.5″ – 2″ wide, shoulder strapping should match front and back panel material Back panel is smaller and differently shaped than the front but should match front panel material 6. Accurately sized and shaped silver/white/light grey chest box made of hard materials with screen-accurate decoration (buttons, knobs, connections, pieces etc.) Chestbox is one-piece – with left and right sides separated by a black painted channel. Chestbox hose should be white cloth-covered and attached from bottom/left/front of box to back of flak vest or tucked in the back of the flak vest It’s drop curve should be around upper thigh length. Black shoulder straps attach it to flak vest with the black plastic snap-release buckles. Black gauntlet-style gloves (flared leather or pleather preferred, cloth or rubber gloves will not meet standards)  FORMAL REQUIREMENTS – YOU MUST...

    read more

    A-Wing pilot (Episode VI)

    A-Wing pilot (Episode VI)

      CHARACTER DESCRIPTION A Wing Pilot – a pilot, sometimes called a flyboy, directly controlled the operation of a vehicle while located within the same craft. A pilot was often assisted by a copilot, navigator, astromech droid, weapons officer, or other crew members. The term “pilot” was applied across vehicles used on land or in water, air, and/or space. The military designation for a pilot was PL-1. Whether this applied to all pilots or only starfighter pilots is unknown. On smaller ships, the word pilot and captain were interchangeable, but on larger vessels, the pilots were rarely the commanders of the vessels. (Source: Wookiepedia) REQUIRED ITEMS 1. Spruce/Hunter Green flightsuit (no Kelly/Olive Drab/Grass Green) with mandarin-style collar (with squared tab) or same tabbed collar under another flipped up collar Correct arm pockets (shaped code cylinder pocket on upper left arm Rectangular pocket with a squared-flap closure on upper right arm), and thigh pockets with squared-flap closures (upper set required, lower set optional) No visible zippers or snaps 2. Light Tan, Beige, or Taupe cloth or canvas spats over black boots Leather spats are not acceptable Spat height should be mid-calf to just under the knee and fall all the way down Spats should feature an additional strap (w/no buckle) of the same or similar material, running around the length around the calf approximately 1/8-1/4 down from the top of the spat Spats may feature single or double seam running down the front or back No laces should be visible 3. Boots should be mid-calf black boots (Jack boots or engineer boots are acceptable Leather pull-on style preferred with low heels No laces No ankle buckles (small buckle at top edge of boot allowable if covered by blousing) No non-black zippers. Any zipper closure must either be hidden or on the inside calf No zippers on front or outside calf of boots High-Calf and Low-Calf boots are acceptable if fully covered by the spats 4. White ejection harness and web belt, all 2” wide Belt may be off-white and is to buckle at the front or back with a black snap-release buckle Leg loops are individual per leg and split at the waist. Belt is worn over the harness 5. Accurately styled scoop-necked charcoal/dark grey cloth or canvas flak vest with smaller white front section bib applied over it White section should have appropriate ribbing- one above chestbox, 2 below (separated from each other by a gap). This is NOT a duplicate of the X-wing vest Small black plastic snap-release buckles on the shoulder straps Side strapping should be white and 1.5″ – 2″ wide Shoulder strapping should match front and back panel material Back panel is smaller and differently shaped than the front but should match front panel material 6. Accurately styled black upper chest box with accurate ribbing details and black straps 7. Accurately shaped white lower chest box (hard or soft) with white cloth-covered hose coming out of the bottom and connecting to flightsuit. This box should be directly under the upper box, with no gap between. 8. Black gauntlet-style gloves (flared leather or pleather preferred, cloth or rubber gloves will not meet standards) FORMAL REQUIREMENTS – YOU MUST HAVE AT LEAST ONE 1. A-Wing hard helmet with Star Wars-style decoration 2. Cloth tan AN-H-15 flight helmet (or...

    read more

    Y-Wing pilot (Episode VI)

    Y-Wing pilot (Episode VI)

      CHARACTER DESCRIPTION Y Wing Pilot – A pilot, sometimes called a flyboy, directly controlled the operation of a vehicle while located within the same craft. A pilot was often assisted by a copilot, navigator, astromech droid, weapons officer, or other crew members. The term “pilot” was applied across vehicles used on land or in water, air, and/or space. The military designation for a pilot was PL-1. Whether this applied to all pilots or only starfighter pilots is unknown. On smaller ships, the word pilot and captain were interchangeable, but on larger vessels, the pilots were rarely the commanders of the vessels. (Source: Wookiepedia) REQUIRED ITEMS 1. Grey/Light Grey flightsuit with either a mandarin-style collar (with pointed tab) or the same tab under another flipped up collar Correct arm pockets (shaped code cylinder pocket on upper left arm Rectangular pocket with a squared-flap closure on upper right arm) Thigh pockets with squared-flap closures (upper set required, lower set optional) No visible zippers or snaps 2. Light Tan, Beige, or Taupe cloth or canvas spats over black boots Leather spats are not acceptable Spat height should be mid-calf to just under the knee and fall all the way down Spats should feature an additional strap (w/no buckle) of the same or similar material, running around the length around the calf approximately 1/8-1/4 down from the top of the spat Spats may feature single or double seam running down the front or back No laces should be visible 3. Boots should be mid-calf black boots (Jack boots or engineer boots are acceptable) Leather pull-on style preferred with low heels No laces No ankle buckles (small buckle at top edge of boot allowable if covered by blousing) No non-black zippers Any zipper closure must either be hidden or on the inside calf No zippers on front or outside calf of boots High-Calf and Low-Calf boots are acceptable if fully covered by the spats 4. White ejection harness and web belt, all 2” wide Belt may be off-white and is to buckle at the back with a black snap-release buckle Leg loops are individual per leg and split at the waist Belt is worn over the harness 5. Accurately styled scoop-necked light grey/beige flak cloth or canvas vest with appropriate chest ribbing Shoulder ribbing and small black plastic snap-release buckles on the shoulder straps Side strapping should be white and 1.5″ – 2″ wide Shoulder strapping should match front and back panel material Back panel is smaller and differently shaped than the front but should match front panel material 6. Small black/dark grey rectangular chest box on the upper chest Left side has wide, raised, lined section running vertically 7. White oval belly box/tube with black strap and white cloth-covered hose attached at two points (either belly tube to flak vest, belly tube to flightsuit, or flak vest to flightsuit) 8. Black gauntlet-style gloves (flared leather or pleather preferred, cloth or rubber gloves will not meet standards) FORMAL REQUIREMENTS – YOU MUST HAVE AT LEAST ONE 1. Y-Wing helmet with Star Wars-style decoration 2. Mini-flares on web belt – a mix of filled and empty slots are okay 3. Accurate Comm Pad (size, details, 3-dimensional, colouration, etc.) visible in the correct comm pad pocket on outside left forearm above wrist OPTIONAL REQUIREMENT 1. Metallic silver Code...

    read more

    X-Wing pilot (Ep IV; VI), Y-Wing pilot (Ep IV)

    X-Wing pilot (Ep IV; VI), Y-Wing pilot (Ep IV)

      CHARACTER DESCRIPTION X Wing Pilot – A pilot, sometimes called a flyboy, directly controlled the operation of a vehicle while located within the same craft. A pilot was often assisted by a copilot, navigator, astromech droid, weapons officer, or other crew members. The term “pilot” was applied across vehicles used on land or in water, air, and/or space. The military designation for a pilot was PL-1. Whether this applied to all pilots or only starfighter pilots is unknown. On smaller ships, the word pilot and captain were interchangeable, but on larger vessels, the pilots were rarely the commanders of the vessels. (Source: Wookiepedia) REQUIRED ITEMS 1. Orange flightsuit  Code cylinder pocket on outside of upper-middle left arm  Rectangular pocket with a flap closure on upper-middle right arm. Flap should be rectangular shaped  Comm pad pocket on outside of left forearm above wrist  Thigh pockets with rectangular flap closures (upper set required, lower set optional)  No visible zippers or snaps.  Mandarin-style with pointed tab closure. Collar closes from left to right with the exposed tab on the right side of the throat Cuffs should close in a similar fashion as the Mandarin-style collar 2. Mid-calf black boots (Jack boots or engineer boots are acceptable)  Leather pull-on style preferred with low heels  Boots should be largely unadorned. No laces or ankle buckles (small buckle at top edge of boot allowable if covered by blousing)  No non-black zippers. Any zipper closure must either be hidden or on the inside of the boot (that is, front and outside zippers are not permitted)  High-Calf boots are acceptable with sufficient blousing of the flightsuit legs 3. Silver/grey leg flares in an olive drab or black leg-band holder  Maximum of 8 flares per holder  Flares and flare holder should be approximately 4″ (inches) long Metal leg flares are preferred, but other materials are permitted as long as, when finished, give the appearance of being silver metallic in appearance Leg flares should be spaced equidistant around the leg Leg flares can be worn on either leg and should be positioned to so the bottom edge of the leg flare is resting on the top of the boot (that is, no gap between the flare holder and the top of the boot) 4. Light grey/silver grey ejection harness and web belt Harness and belt are made of strapping material that is 2” (inches) wide Front and back straps extend up the torso under the flack vest and are secured to either the flightsuit or to the inside the flak vest panels. Attachment must be hidden by the flak vest. The lower part of the harness should fall (or loop) just below the inseam (or crotch area) Two loops of strapping are connected to the front-back strapping (at the lowest part of the front-back loop) and loop around each leg, drooping no lower than the knees The belt is worn over the front/back harness strap and is closed with a silver/gray “cargo slide” (or roll pin) style buckle. The free end of the belt is looped around the slide so that the excess belt is on the underneath/inside of the belt, not on top/outside of the belt. The right side of the belt contains 6 (six) vertical loops for mini-flares. Mini-flares are made of metal or other materials that, when...

    read more

    Rebel Officer (Episode VI)

    Rebel Officer (Episode VI)

      CHARACTER DESCRIPTION An officer of the Alliance who was present at the pre-Battle of Endor briefing on Home One.   (Source Wookieepedia)   REQUIRED ITEMS: Black Boots Tan slacks Light blue long sleeved collared shirt (a US Air Force dress shirt is perfect) Tan overtunic with pocketed sleeves Brown belt with octagonal belt buckle   REQUIRED FOR FORMAL: Rank badge and collar insignia Black or dark brown gauntlets Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    General Crix Madine

    General Crix Madine

      CHARACTER DESCRIPTION Crix Madine was an Imperial Army officer who formed and led the notorious Storm commandos of the Imperial military. In light of later missions, such as releasing a plague on Dentaal, Madine defected to the Rebel Alliance. After several complications in his defection, Madine became a valuable part of the Rebellion, advising and leading commando operations. He also planned the successful commando raid on the second Death Star’s shield generator. After the Battle of Endor, Madine continued to serve in the New Republic. (Source Wookieepedia) REQUIRED ITEMS: Black Boots Tan slacks Light blue long sleeved collared shirt (a US Air Force dress shirt is perfect) Tan overtunic with pocketed sleeves Black or dark brown gauntlets Brown belt with octagonal belt buckle REQUIRED FOR FORMAL: Rank badge and collar insignia Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more