Episode V




  • Lobot

    Lobot

      CHARACTER DESCRIPTION Lobot was a Human male who served as the chief administrative aide to Baron Administrator Lando Calrissian on Cloud City over the planet Bespin.  His brain was connected to the city’s central computer which allowed him to communicate directly with the city’s computer network.  In this capacity, he served as the city’s first and only computer-liaison officer. Source Wookieepedia   REQUIRED ITEMS 1. Tunic a. Cream colored undershirt with wide billowy sleeves and cuff at the wrist and stand-up square collar. 2. Vest a. Gray in color (to match references) b. Has a Y-shaped bib section and two pocket flaps. Top stitching is visible near side boarder of bib and side and bottom of pocket flaps. c. Back of vest has parallel pleats at side that goes up and over the shoulder and ends at the pocket flaps near the arm pit. (Similar to shoulder tucks on the Jedi outer tunic, but extends all the way down the back of the vest.) d. Vest may be attached to the pants in a jumpsuit fashion if desired 3. Pants a. Full-length pants in the same color of the vest b. No pockets. 4. Belt a. The belt is black in color, featuring 2 layer construction.  The bottom layer should be of a thin leather like material that wraps around the costumer.  The top layer should be thicker and covered in a leather or leather like material. b. The belt has a wide portion that wraps from the costumer’s right hip to left hip.  The back of the belt is narrow, about 3 inches wide. c. The top layer of the belt contains a rectangular opening in the middle of the front portion to display the greeblies. This thick portion wraps from the costumer’s right hip to left hip. d. Greeblies include in the opening of the belt’s top layer include: 2 large silver discs 2 large black discs with a + configuration on the surface 2 Small black rectangles with silver borders 2 sets of 2 small silver rectangles A single silver rectangle  The bottom portion of a snap e. Connecting the vest and pants is a single small black belt loop piece centered on the back of the vest and pants.  The back of the belt should sit underneath this belt loop. 5. Headpiece a. Accurately shaped headpiece that is gray in color. b. There is a layer of light gray felt-like material over the top rim of the headpiece. c. LEDs can be either functional or not. d. The headpiece is symmetrical. Each of the two sides of the headpiece has the following: -Four red tinted rectangular LEDs in a recessed side panel. Side panel is painted dark blue, that appears black. Black paint is also acceptable. -One red tinted LED in a recessed circle at side of the cheeks. -A row of white LEDs facing backwards under a clear plastic shield, no more than nine LEDs -Two non functioning red tinted LEDs with black o-rings at the base on the back panel. -Four small red tinted LEDs on the front panel. -Accurately placed reflective tape. *Costumer must be bald.  A bald cap can be used to achieve the look. 6. Boots a. The boots are Chelsea style – ankle boots in a gray, closely matching...

    read more

    Cloud City Wing Guard

    Cloud City Wing Guard

          CHARACTER DESCRIPTION The Bespin Wing Guard, informally known as the Bespin Security Guard, Cloud City Wing Guard, or Cloud Police, whose members sometimes were called Bespin cops, was the primary security force of Cloud City on Bespin. Source: Wookieepedia   REQUIRED ITEMS 1. Undershirt a. Shirt is a cream-colored turtleneck made of jersey material b. Only the turtleneck collar of the undershirt is exposed. 2. Jacket a. The jacket is blue in color and made of a matte material b. The jacket closes in the center using Velcro for the closure c. Trim on jacket is very thin almost flat gold piping. Piping goes around the neck down both sides of the jacket and around the back about 1″ inside the jacket edge. There is an additional looped design out of the same trim on the front lower corner of both sides of the jacket d. Jacket has a 3 inch high dart in the center of each side front at the bottom e. The sleeves of the jacket have red cuffs on the forearms that are pointed to a triangular shape on the outer side of the sleeve f. The top triangular points of the red cuffs are trimmed in black g. Jacket is collarless h. Jacket bottom is below the waistline and covers the waistline of the pants.   NOTE: The Jacket, Pants, and Helmet are a dark blue (not navy) in color and should match as closely as possible.  Since the Helmet is a suede like material it might be easier to purchase cream, white or ivory fabrics and then dye them so they all look the same. 3. Pants a. The pants are made of the same blue material as the jacket b. The pants are tucked into the boots c. Pants may close in front with standard fly stitching 4. Boots a. The boots are made of leather or leather-like material. No rubber boots allowed b. Boots come to just below the knee and are black leather. (No suede or vinyl or rubber boots) c. It is preferred that the boots have a visible full-length inside zipper with either a brass or gold colored regular zipper pull – however pull on boots will be permitted or smaller inside zippers. No laces or buckles allowed.   5. Helmet  a. Accurately shaped helmet based on the Ottoman Turkish Kabulak but worn backwards to create the very short visor effect. Material of hat should have a suede like appearance and match the jacket and pants in color. The helmet design is made from 2 belts. Each belt is made of a right and left side. The right and left sides overlap on the top belt in the opposite direction as the bottom belt. The bottom belt sits on top of the upper belt. b. Belts have a dark blue trim on the edges which are visible and make the design of the hat.   OPTIONAL ITEMS 1. Relby K-23 Blaster Pistol in accurately shaped black plastic holster.  Holster may be worn on the right or left hip.   COSTUME RESOURCES 1. Rebel Supporters Forum     Reviewed on 22nd January 2015   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be...

    read more

    Luke Skywalker (Bespin Fatigues)

    Luke Skywalker (Bespin Fatigues)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Dagobah Training Fatigues)

    Luke Skywalker (Dagobah Training Fatigues)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Snowspeeder / X-Wing)

    Luke Skywalker (Snowspeeder / X-Wing)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Luke Skywalker (Taun-Taun Hoth Gear)

    Luke Skywalker (Taun-Taun Hoth Gear)

    Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire in the Galactic Civil War and helped found the New Republic, as well as the New Jedi Order.

    read more

    Jedi Costume Standards (Generic)

    Jedi Costume Standards (Generic)

      CHARACTER DESCRIPTION A Jedi was a member of the Jedi Order, who studied, served and used the mystical energies of the Force; usually, the light side of the Force. The weapon of the Jedi was the lightsaber, a weapon with a blade made of pure energy. The Jedi fought for peace and justice in the Galactic Republic, usually against their mortal enemies, the Sith and Dark Jedi, who studied the dark side of the Force. (Source Wookieepedia)   REQUIRED: 1. Outer tunic (OT): a. Sleeved. Sleeves should hang at least to the knuckles when the arms are held down at the side. b. No Kimonos’s, karate/judo gi or gi like construction allowed. c. OTs may be sleeveless as long as an Inner Tunic (IT) is worn and is long sleeved. No bare-armed Generic Jedi. d. Sleeveless outer tunics may be fastened at the front and have an attached hood (recommended), though a hood is not compulsory. No vests, or sleeveless V-neck type sweaters may be worn as a sleeveless OT. A sleeveless OT should be surcoat or standard OT style in length. (Ki Adi Mundi and Sarrissa Jeng are examples of surcoat style OT’s.) e. Tabards should not be worn with Ki Adi Mundi style OT or surcoat. Tabards are required with the standard OT style. f. OT’s should have a collar approximately 1 inch to 2 inches wide. g. OTs overall length may be variable and may extend to the floor. OTs are generally made in a fashion where there is a full skirt (attached to the main body of the OT) where the seam is hidden by the obi. 2. Tabards: Must extend at least to or past the bottom hem of the OT on the front. The back tabards may end under the obi or may extend to (or past) the bottom hem of the OT (or may be the same length as the front tabards). This guideline is obviously for the more traditional length OTs. For OTs that are longer (past the knee or to the floor or where a full length skirt is worn), the tabard length would be more variable. a. Tabard construction should be such that the front tabards do not overlap. This is often accomplished by constructing the tabards in a “Y” formation where any seam joining the tabard below the obi to the tabard above the obi is covered by the obi. Tabards may cross in the back. Tabards may be sewn together in the back. b. Scarf-style tabards, having an around-the-neck design, are permitted. c. A single front tabard, centrally located (covering the crotch area) is permitted. d. The end of the front tabard(s) may have a variable design (square, rounded, triangular, octagonal, etc.) e. Tabards may have borders and/or varying decorative symbols or other decorations (such as Aurebesh, etc.). The decorations/designs should not obviously be from an Earth-bound period or culture (Renaissance, Celtic, Asian, tribal, etc.) f. Leather or pleather tabards are permitted. g. Tabard width should generally be from the seam at the collar of the OT to the edge of the shoulder and be a similar width as the obi. A general width to use would be 5 inches to 6 inches wide (depending on one’s height and build). Common sense should be used in...

    read more

    Leia Organa (end scene gown)

    Leia Organa (end scene gown)

      CHARACTER DESCRIPTION Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia) REQUIRED ITEMS: 1. White ankle-length gown in an opaque, non-shiny knit fabric with high, fitted collar fastened with hooks/eyes. Gown has a white, partially open hood reaching to just below the waist (gathered rectangle style preferred), wrist-length to knuckle length bell sleeves and slits up the sides to or just below the knee. Gown may not have shoulder seams unless raglan and no center front or back seam. Lining the gown is recommended but not required. 2. Belt is white firm, non-shiny leather or leather-like material with slight “V” shape. It has 7 metal pieces on it, 6 elongated octagonal matching with one pentagon shape in the center front. Belt pieces should be spaced according to the wearer’s waist measurement or additional plates identical to the 6 octagonal plates may be added for an even-spaced look (though 7 plates total are preferred and no less than 7 plates allowed). 3. White leather or non-shiny vinyl flat or low (1/4″ to 1 1/2″ in height recommended) soled boots, at least mid calf high without laces or logos. 4. Hair pulled back into a large full bun at the crown of the head. Naturally-occurring hair color only; no bangs. COSTUME RESOURCES: Padawan’s Guide Leia End Gown page SWFFAQ Leia End Gown page  Revised October 21, 2012 Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Leia Organa (Bespin escape)

    Leia Organa (Bespin escape)

      CHARACTER DESCRIPTION Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia) REQUIRED ITEMS: 1. White jumpsuit in a non-shiny fabric with pill-shaped padded patches on the upper arms and forearms with larger patches on the thighs in a rounded and contoured diagonal quilted zig-zag design, quilted side front and side back sections, piping trim and a waist-length, top-stitched matching belt. A padded jumpsuit is preferred but not required. 2. White non-shiny leather or vinyl boots with a 1” to 2” heel (2” recommended) tucked under the jumpsuit. 3. Hair pulled back into bun at the crown of the head with two thick braids looping from bun. Naturally-occurring hair color only; no bangs. OPTIONAL ITEMS: E-11 Stormtrooper blaster COSTUME RESOURCES: Padawan’s Guide Bespin Escape Leia page SWFFAQ Bespin Escape Leia page  Revised October 21, 2012 Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Leia Organa (Bespin gown)

    Leia Organa (Bespin gown)

      CHARACTER DESCRIPTION Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia) REQUIRED ITEMS: 1. Burgundy or maroon-colored tunic in a non-shiny fabric that falls to mid-thigh. Fitted sleeves end in rounded point just past the wrist. Neckline and wrists have copper metallic trim. 2. Loose harem pants with fitted ankles the same fabric as the tunic. 3. Diamond-shaped stiff belt covered in same fabric as tunic and pants. 4. Off-white cloak in a non-shiny fabric with a padded yoke with standing collar and metallic copper trim, along with a sheer non-shiny lining the same color as the tunic and pants and a copper metallic trim. The off-white fabric of the cloak is decorated in a stylized, paisley-like pattern filled with a “fish scales” design complete with rosettes of varying sizes at the waistline and hem in shades of yellow, pink, burgundy, and brown. 5. Flat shoes dyed to match color of tunic/pants. 6. Hair is pulled back into bun at the crown of the head with two thick looped braids hanging from the bun. Naturally-occurring hair color only; no bangs. COSTUME RESOURCES: Padawan’s Guide Bespin Leia page SWFFAQ Bespin Leia page  Revised October 21, 2012 Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Leia Organa (Hoth gear)

    Leia Organa (Hoth gear)

      CHARACTER DESCRIPTION Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan. An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia) REQUIRED ITEMS: 1. White jumpsuit in a non-shiny fabric with pill-shaped padded patches on the upper arms and forearms with larger patches on the thighs in a rounded and contoured diagonal quilted zig-zag design, quilted side front and side back sections, piping trim and a waist-length, top-stitched matching belt. A padded jumpsuit is preferred but not required. 2. Off-white or cream padded vest with diamond-shaped quilting below the yoke, a padded, rounded fold-over collar and piping trim details. 3. Rank insignia on upper left side of the vest yoke. 4. Wrist communicator attached to the left forearm quilted patch. 5. Grey leather or non-shiny vinyl wedge-heel knee boots with three straps, worn with the jumpsuit pant legs tucked in. 6. Hair pulled back into braids that wraps around the head. Naturally-occurring hair color only; no bangs. OPTIONAL ITEMS: Off-white or cream leather gloves COSTUME RESOURCES: Padawan’s Guide Hoth Leia page SWFFAQ Hoth Leia page  Revised October 21, 2012 Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Hoth Hanger Technician (Ep V)

    Hoth Hanger Technician (Ep V)

      CHARACTER DESCRIPTION   Hoth Hanger Technicians had an important role to play in the battle of Hoth. The technicians oversaw the shield generator the Rebel Alliance defence against any incoming Imperial attacks. They also helped maintain the Ion cannon used to take out a Star Destroyer and assisted in launching the Rebel Fleet off of the Hoth Planet when the Empire overran the Rebel defences.   REQUIRED ITEMS 1. Accurate hat in a grey, beige or ecru colour 2. Tan quilted vest with upright, padded collar 3. Jumpsuit/Coverall in a light grey, beige, or ecru colour 4. Black Jack boot-style of boot 5. White/Light grey gloves with med grey cuff OPTIONAL ITEM 1. Wrist Comm Resources: Rebel Legion Boards: Rebel Troopers Forum Ice Station Echo Yahoo! Group PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Hoth Hanger Trooper (Ep V)

    Hoth Hanger Trooper  (Ep V)

      CHARACTER DESCRIPTION   A Hoth Rebel Trooper is an infantry unit equipped with special gear who fought for the rebellion on the ice planet Hoth. These units are not specifically trained to work in snow, being regular Rebel troopers equipped with snow gear.   REQUIRED ITEMS 1. Accurate soft helmet in a white, beige or ecru colour 2. White framed goggles with with yellow or light amber lenses 3. Tan quilted vest with upright, padded collar 4. Shirt/Pants or Jumpsuit/Coverall in a white, grey, beige, or ecru colour with quilted forearms 5. Accurate grey or tan coloured gaiters or Jack boot-style of black boot 6. White/Light grey gloves with med grey cuff and com device FORMAL REQUIREMENTS – CHOOSE TWO 1. Rank badge on vest Made optional since it is not required in other standards  2. Comm device/earpiece on hat 3. Tan or black scarf Resources: Rebel Legion Board: Rebel Trooper Forum Ice Station Echo Yahoo! Group PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Hoth Trench Trooper (Ep V)

    Hoth Trench Trooper (Ep V)

      CHARACTER DESCRIPTION   Hoth Trench Troopers featured in Empire Strikes back and could be seen trying to hold off the oncoming attack of Imperial forces whilst the Rebel fleet attempted to evacuate the Ice Planet Hoth.   REQUIRED ITEMS 1. Accurate soft helmet in a white, beige or ecru colour 2. White framed goggles with with yellow or light amber lenses 3. Jacket in white or beige/natural colour with tan quilted top section 4. Backpack Vest in a beige or ecru colour 5. Tan coloured pants with quilted/padded knees 6. Accurate grey or tan coloured gaiters 7. White web belt with buckle detail 8. Greeblies on right front vest 9. White/Light grey gloves with med grey cuff and com device FORMAL REQUIREMENTS – CHOOSE TWO 1. Rank badge on vest 2.  Comm device/earpiece on hat 3. DH-17 blaster Either RFT version or modified Hoth version) 4. White holster 5. Hoth Rifle 6. Backpack/Hardpack Canvas covered boxes with black greeblies on a frame 7. Tan fabric pouch 8. Tan or black scarf PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Snowspeeder pilot (Episode V)

    Snowspeeder pilot (Episode V)

      CHARACTER DESCRIPTION A pilot, sometimes called a flyboy, directly controlled the operation of a vehicle while located within the same craft. A pilot was often assisted by a copilot, navigator, astromech droid, weapons officer, or other crew members. The term “pilot” was applied across vehicles used on land or in water, air, and/or space. The military designation for a pilot was PL-1. Whether this applied to all pilots or only starfighter pilots is unknown. On smaller ships, the word pilot and captain were interchangeable, but on larger vessels, the pilots were rarely the commanders of the vessels. (Source: Wookiepedia) REQUIRED ITEMS 1. Orange flightsuit with mandarin-style collar and pointed tab Code cylinder pocket on upper-middle left arm Rectangular pocket with a flap closure on upper-middle right arm Comm pad pocket on outside of left forearm above wrist Thigh pockets (upper set required, lower set optional) No visible zippers or snaps 2. Orange flight jacket with padded collar and ribbed strips down both arms 3. Tan/grey Hoth-style boots and gaiters with accurate movie-style strapping or mid-calf black boots Jack boots or engineer boots are acceptable Leather pull-on style preferred with low heels No laces No ankle buckles (small buckle at top edge of boot allowable if covered by blousing) No non-black zippers Any zipper closure must either be hidden or on the inside calf No zippers on front or outside calf of boots High-Calf boots are acceptable with sufficient blousing of the flighsuit legs 4. Silver/grey leg flares in an olive drab or black leg-band holder  Maximum of 8 flares per holder Flares should be approximately 4″ long 5. Light grey/silver grey ejection harness and web belt, all 2” wide 6. White flak vest with accurate ribbing and clasps ESB Snowspeeder version is worn backwards Vest sizing should be proportional to the wearer 7. Accurately sized grey chest box with accurate decoration. Raised buttons (acrylic preferred, see the Pilot Forums for acceptable button color schemes) Separated rocker switches Appropriate material greebles, pin stripes etc.) 1″ – 1.75″ diameter grey hose or aviation hose should attach at the left-bottom of the chestbox and connect to the suit in some screen-accurate manner (tucked up into the flak vest, attached to flightsuit, etc.). (Please note that Costumebase chestboxes will not pass the standards unmodified, however once slightly modified, they will meet standards.) 8. White and grey gauntlet-style gloves FORMAL REQUIREMENTS – YOU MUST HAVE AT LEAST ONE 1. X-Wing helmet with Star Wars-style decoration 2. Tan or Beige balaclava or cloth-covered soft helmet, no brim. (design similar, but not exact to the AN-H-15 or British RAF versions) 3. Badge in jacket chest pocket along with comm pad on left gauntlet above wrist 4. Mini-flares on belt. A mix of filled and empty slots are okay 5. Accurate belt buckle on web belt COSTUME RESOURCES Alderaan Base X-Wing Pilot Tutorial Richie’s Armor X-Wing Helmet Tutorial Parts of Star Wars Luke X-Wing Pilot page Parts of Star Wars X-Wing Pilot page PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build...

    read more

    X-Wing pilot (Ep IV; VI), Y-Wing pilot (Ep IV)

    X-Wing pilot (Ep IV; VI), Y-Wing pilot (Ep IV)

      CHARACTER DESCRIPTION X Wing Pilot – A pilot, sometimes called a flyboy, directly controlled the operation of a vehicle while located within the same craft. A pilot was often assisted by a copilot, navigator, astromech droid, weapons officer, or other crew members. The term “pilot” was applied across vehicles used on land or in water, air, and/or space. The military designation for a pilot was PL-1. Whether this applied to all pilots or only starfighter pilots is unknown. On smaller ships, the word pilot and captain were interchangeable, but on larger vessels, the pilots were rarely the commanders of the vessels. (Source: Wookiepedia) REQUIRED ITEMS 1. Orange flightsuit  Code cylinder pocket on outside of upper-middle left arm  Rectangular pocket with a flap closure on upper-middle right arm. Flap should be rectangular shaped  Comm pad pocket on outside of left forearm above wrist  Thigh pockets with rectangular flap closures (upper set required, lower set optional)  No visible zippers or snaps.  Mandarin-style with pointed tab closure. Collar closes from left to right with the exposed tab on the right side of the throat Cuffs should close in a similar fashion as the Mandarin-style collar 2. Mid-calf black boots (Jack boots or engineer boots are acceptable)  Leather pull-on style preferred with low heels  Boots should be largely unadorned. No laces or ankle buckles (small buckle at top edge of boot allowable if covered by blousing)  No non-black zippers. Any zipper closure must either be hidden or on the inside of the boot (that is, front and outside zippers are not permitted)  High-Calf boots are acceptable with sufficient blousing of the flightsuit legs 3. Silver/grey leg flares in an olive drab or black leg-band holder  Maximum of 8 flares per holder  Flares and flare holder should be approximately 4″ (inches) long Metal leg flares are preferred, but other materials are permitted as long as, when finished, give the appearance of being silver metallic in appearance Leg flares should be spaced equidistant around the leg Leg flares can be worn on either leg and should be positioned to so the bottom edge of the leg flare is resting on the top of the boot (that is, no gap between the flare holder and the top of the boot) 4. Light grey/silver grey ejection harness and web belt Harness and belt are made of strapping material that is 2” (inches) wide Front and back straps extend up the torso under the flack vest and are secured to either the flightsuit or to the inside the flak vest panels. Attachment must be hidden by the flak vest. The lower part of the harness should fall (or loop) just below the inseam (or crotch area) Two loops of strapping are connected to the front-back strapping (at the lowest part of the front-back loop) and loop around each leg, drooping no lower than the knees The belt is worn over the front/back harness strap and is closed with a silver/gray “cargo slide” (or roll pin) style buckle. The free end of the belt is looped around the slide so that the excess belt is on the underneath/inside of the belt, not on top/outside of the belt. The right side of the belt contains 6 (six) vertical loops for mini-flares. Mini-flares are made of metal or other materials that, when...

    read more

    General Carlist Riekeen / Echo Base Commanders

    General Carlist Riekeen / Echo Base Commanders

    CHARACTER DESCRIPTION Carlist Rieekan was an Alderaanian general who, throughout his life, served the Galactic Republic, the Alliance to Restore the Republic, the Alliance of Free Planets, the New Republic, and the Galactic Federation of Free Alliances. He joined the Republic’s Judicial Forces at the age of seventeen before serving in the Army of the Republic during the Clone Wars. With the advent of Supreme Chancellor Palpatine’s ascension to Emperor and the installment of the Galactic Empire in 19 BBY, Rieekan immediately rejected the new regime. Instead, he chose to serve the Royal House of Alderaan as a civilian tactician, before becoming one of the founding members of the Alliance to Restore the Republic, a rebellion against the rule of the Emperor. (Source Wookieepedia) REQUIRED ITEMS: Gray Hoth style gaitered boots. Tan pants, no distinguising marks and no visible pockets. Light tan jacket with high standing and batted collar, quilted yoke in a darker tan. Two breast pockets with red or rust colored piping and tab closure. Mid-thigh in length (possibly quilted like that of a Hoth Trench Trooper). Velcro closure all the way down the front. Two large cargo pockets below the waist. Belt loop on each side and two in the back. Tan overtunic with pocketed sleeves. light gray with a darker gray gauntlet with comlink. Medium brown belt with octagonal buckle. REQUIRED FOR FORMAL: Rank badge, 5 red discs on metal. OPTION FOR GENERIC OFFICERS: Hoth Hat with goggles and ear communicator Rank badge, appropriate discs on metal   Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Generic Wookiee

    Generic Wookiee

      CHARACTER DESCRIPTION A race of towering, hairy bipeds, the Wookiees were one of the most recognizable species in the galaxy. They were renowned for their great strength, their intelligence, their loyalty and their short temper.  Due to their appearance, they were sometimes referred to as “walking carpets”.  (Source Wookieepedia) REQUIRED ITEMS: 1. Complete hair suit using natural or synthetic fibers. Hair should be natural colors such as brown, blond, auburn, black, grey, or white. Hair should average at least 6 inches or longer, but 8-10 inch long hair is preferred. Complete coverage is required; no bald spots or exposed skin/undersuit. 2. Faux fur is not allowed unless hair extensions have been added. No yarn or shag carpet Wookiees. The hair must maintain a consistent quality/type throughout the suit. 3. Dark brown, gray, or black gloves should be worn. There should be enough overlap between the gloves and the wrists of the hair suit that no skin is exposed. Gloves may be made of leather, vinyl, cloth, or rubber. 4. When worn, the feet must be completely covered with hair except for the bottom and the toes. The toes and toenails/claws must be visible. 5. The mask must completely cover the head and neck, without completely obscuring the shape of the shoulders. The eyes, a smooth black nose, and a large jaw/muzzle should all be clearly visible. A slight mustache like feature should be present as well. 6. The mask hair should be smooth and well groomed, not bushy, so that the mask’s shape and structure are clear. Beards, mustaches, dreadlocks and other features are encouraged. 7. Static masks should not be frozen in a fully opened position. All static mouths should be closed. 8. Although a functioning jaw and/or lip snarl is not required, the skin and lips of any mechanical masks should appear as one piece, rather than a separated jaw and and face. This refers only to the mask’s outward appearance, not the underskull. Costumers should be aware that mechanical jaws and lips are complex projects requiring purpose-built components using special materials. They cannot simply be added to an existing latex rubber mask. Consult the costuming resources and fellow Wookiee costumers for advice on this project. FORMAL REQUIREMENTS: For formal status, you must be at least 7 feet tall while in costume. Lifts, stilts, and other height-enhancing footwear can achieve this. COSTUME RESOURCES: Chewbacca Costuming Resources Wookiee Costuming Yahoo Group Making Wookiee  Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Chewbacca (Classic Trilogy)

    Chewbacca (Classic Trilogy)

      CHARACTER DESCRIPTION Chewbacca (or “Chewie”, as he was known by his friends) was a legendary Wookiee from Kashyyyk and co-pilot of Han Solo’s ship, the Millennium Falcon. He was the son of Attichitcuk, the husband of Mallatobuck, and the father of Lumpawaroo. (Source Wookieepedia) REQUIRED ITEMS: 1. Complete hair suit using natural or synthetic fibers. Most of the hair should be a medium-brown color. The outsides of the knees, the shoulders, the upper back, and the back of the head should be a dark brown, gray, or a mix. Hair should average at least 6 inches or longer, but 8-10 inch long hair is preferred. Complete coverage is required; no bald spots or exposed skin/undersuit. 2. Faux fur is not allowed unless hair extensions have been added. No yarn or shag carpet Wookiees. The hair must maintain a consistent quality/type throughout the suit. 3. Dark brown leather or faux leather bandolier, approximately 3 inches wide with a narrow center strap, with 8 or 9 smooth large metallic boxes and 8 or 9 smooth small metallic boxes spaced evenly along the bandolier with the narrow center strap going over the boxes. The ends of the bandolier should be tapered and attach to a medium-sized leather or suede pouch with a large flap cover. The bandolier should hang from the left shoulder across the torso with the pouch resting on the right thigh. 4. Dark brown, gray, or black gloves should be worn. There should be enough overlap between the gloves and the wrists of the hair suit that no skin is exposed. Gloves may be made of leather, vinyl, cloth, or rubber. 5. When worn, the feet must be completely covered with hair except for the bottom and the toes. The toes and toenails/claws must be visible. 6. The mask must completely cover the head and neck, without completely obscuring the shape of the shoulders. The eyes, a smooth black nose, and a large jaw/muzzle should all be clearly visible. A slight mustache like feature should be present as well. The mask hair should be smooth and well groomed, not bushy, so that the mask’s shape and structure are clear. 7. Static masks should not be frozen in a fully opened position. All static mouths should be closed. 8. Although a functioning jaw and/or lip snarl is not required, the skin and lips of any mechanical masks should appear as one piece, rather than a separated jaw and and face. This refers only to the mask’s outward appearance, not the underskull. Costumers should be aware that mechanical jaws and lips are complex projects requiring purpose-built components using special materials. They cannot simply be added to an existing latex rubber mask. Consult the costuming resources and fellow Wookiee costumers for advice on this project. FORMAL REQUIREMENTS: For formal status, you must be at least 7 feet tall while in costume. Lifts, stilts, and other height-enhancing footwear can achieve this. COSTUME RESOURCES: Chewbacca Costuming Resources Wookiee Costuming Yahoo Group Making Wookiee  Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Han Solo (Hoth Gear)

    Han Solo (Hoth Gear)

      CHARACTER DESCRIPTION Han Solo was a Human smuggler from Corellia who achieved galactic fame as a member of the Rebel Alliance and later the New Republic. (Source Wookieepedia) REQUIRED ITEMS: 1. Dark blue or dark brown quilted thigh-length parka with a full hood trimmed in brown/gray fur, 2 pocket flaps at the bottom of the front yoke and a flap pocket on each upper sleeve 2. Correct rank insignia on upper left side of the vest yoke 3. Light gray or tan pants with quilted knees 4. Light gray or tan suede boots with suede wraps around them and 3 white straps on each 5. Light gray gauntlet style suede gloves with comlink on left wrist 6. White rimmed ski goggles with clear (colourless) lenses 7. Light gray or off-white long scarf 8. Accurate leather gunbelt and buckles with capped holster, correct tools and proper droid caller 9. DL-44 blaster (Empire Strikes Back version), unless local laws prohibit or strongly discourage carrying anything that looks like a firearm 10. White electrobinoculars with attached shoulder-strap 11. White or off-white accurate Hoth cap/soft helmet OPTIONAL ITEMS: EnhanceScan General-Purpose Scanner Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more