Allies




  • Malakili (Rancor Keeper)

    Malakili (Rancor Keeper)

      CHARACTER DESCRIPTION A human male, Malakili was born on Corellia, a planet of the Core Worldsbest known for its pirates, its fast starships, and skilled merchants.  Since his most tender childhood, the young Malakili was fascinated by wild animals, and he wished he could dedicate his life to taking care of them. Source Wookieepedia   REQUIRED ITEMS 1. Hood: a. The hood is made of a dark brown leather or leather-like material, and weathered to look black in places. b. The hood is approximately one square yard, cut to a similar shape as references. c. There is a split / seam on right side of head, used to shape to head. d. There are two long, loose laces hang down from seam. The hood has the appearance of being “stitched” together by hand with black lacing. e. The hood’s edges have a rough appearance. f. There is patchwork of lighter shade leathers on top of head at brow and down left side of head. g. Attached to the hood is 3/4″ to 1″ wide black “choker” around neck. The choker extends up behind the ears and attaches to inside of hood to keep hood in place. h. The hood appears dirty, sweat-stained and greasy. 2. Arm Bands: a. The armbands are 2-1/2″ wide heavy leather or leather-like material straps. They are dark brown in color and appear to be sweat-stained. b. The bands are worn on the biceps (just below the armpit) and wrap completely around the arm with no gaps. c. The edge of straps appear to be worn (either rounded or beveled). d. There is no visible closure. Any overlap used for closure faces to the back, under the arm. e. The armbands have three bronze-looking domes, approximately 2″ on diameter at the base. The domes are not perfect cups, but rather appear to be hand-crafted. Each dome has a “weld” detail around its base, approximately 1/8″ thick. The domes are equally spaced around the strap, on “points” of four, with the fourth space empty under the arm. f. Between each dome is a pair of silver studs. There are eight total. The center of studs are 1/2″ from the edge of the strap. The studs are a half-dome shape and silver, but are dirty and tarnished till almost black. 3. Vambraces/Forearm Guards: a. The arm guards are made from a heavy leather or leather-like material. They are dark brown in color. They appear sweat-stained. b. The center area of forearm has a lighter brown area in the center. c. The armgaurds are extended down to cover half if the back of the hand.The guards do not reach the knuckles. They are extended up to cover approximately 2/3 of the forearm. The guards do not reach the elbow. d. The edges of guards appear to be worn. Either rounded or beveled. e. There are seven studs circle the forearm. The studs are equally spaced and symmetrical. The center of studs are 1/2″ from the edge of the strap. The studs are a half-dome shape and silver, but are dirty and tarnished till almost black. f. There is a 2″ wide leather strap wraps around the wrist, over the top of the guard. g. There are two pairs of studs are on each side of the wrist strap,...

    read more

    Jar Jar Binks (Senatorial Robes)

    Jar Jar Binks (Senatorial Robes)

      CHARACTER DESCRIPTION Jar Jar Binks was the first Gungan to represent his people in the Galactic Senate, first serving as a Junior Representative along with Senator Padmé Amidala, and then, after her death, serving as full Senator himself. Source Wookieepedia   REQUIRED ITEMS 1. Outer Robe consists of an ornate detailed design, mostly consisting of smaller squares, in hues of yellows, rust, browns and blues. The robe has two long tabards in the front with an angled design of the same material. The back has an upside down V pattern in the material and the front is a straight angle. The robe is slightly shorter in the front and longer in the back, nearly draping to the floor. 2. The Inner Robe is a burgundy or wine color. It has no colored design on it, but is textured with a pattern of lines. The sleeves are billowing on top and bottom, but gathered at the elbow. The lower part is detailed with a deeper wine trim evenly spaced along the forearm; there are four burgundy wine lines wrapping around the arm. The inner robe is long and flowing, and it reaches the costumers ankles or lower. 3. The Necklace is on a long black or dark brown cord. Necklace charms are metallic gold colored and strung vertically. The five charms should be of accurate shape and size, scaled to the wearer. 4. The bead work drapes off of the shoulders and around the back. The beads may consist of uneven mixtures of black, brown, amber, white, off-white, or colors in between. They are approximately 8 inch long strands and should be dense. 300 strands of beads minimum are needed to achieve the dense look around the shoulders and back. The shoulder pads have two detailed bead designs of inner woven colors of brownish black and amber to brown; 2 inches wide minimum. 5. Latex Mask to achieve JarJar’s face is required. The mask should be of high quality and consistent with the reference. The ears should billow and you should not be able to see the costumers face in any manner and the seams should be hidden. 6. Four fingered hands that are orangish-red with brown fingernails. 7. Three toed feet are large and painted orangish-red consistent with the rest of the costume. The toe nails are of a brown color matching the fingernails.     COSTUME RESOURCES RLGS forum Aliens & Creatures forum   Standard reviewed by the Costume Standards Committee 7 April 2015   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Mara Jade (as Arica- Blue dancing dress)

    Mara Jade (as Arica- Blue dancing dress)

      CHARACTER DESCRIPTION Arica was the alias used by Mara Jade when she infiltrated Jabba’s Palace in 4 ABY.  Disguised as a dancer, her goal was to get close enough to Luke Skywalker to kill him, as Palpatine had ordered her to. Source Wookieepedia   REQUIRED ITEMS 1. Dress: a. Sleeveless top made of black fishnet material. b. The top has a blue fabric applique sewed onto the chest.  The applique resembles a pair of “wings” with five finger shapes extending from each side of the applique.  In the center of the applique, there is a black stitched circular design with a line going down through the center.  There are also two black stitched triangular designs on the top of each wing. c. Two skirt panels (made of the same blue fabric as the chest applique) that are ankle length.  The skirt panels are front and back, but still connected to each other on the sides.  The pieces of the skirt connected at the sides have decorative belt loops (one at each side. A second belt loop on each side is optional).  The skirt panels must be of a fabric that drapes and flows nicely. 2. Cape: a. The cape is a wide rectangular cape that can be made of the same fabric as the skirt and chest applique, or it may be sheer. b. Two thin, black or silver elastic bands hold the cape to the costumer’s upper arm (one band per arm) and two silver bracelets connect the cape to the costumer’s wrists (one bracelet per wrist). 3. Leggings/stockings: a. The leggings/stockings are black in color. b. They should begin at mid-thigh length and reach the ankles 4. Circlet: a. The circlet is thin and silver. b. Circlet should encircle the forehead. c. The circlet has decorative gems located on each temple. 5. Hair: a. The hair is slightly wavy. b. The hair may reach from the shoulders to mid-back in length.   OPTIONAL ITEMS 1.  Black or silver sandals.  These are recommended (but not required) while trooping to protect the costumer’s feet 2.  A necklace that is just above the neckline of the top and has decorative triangular accents attached to it. 3. Garter belts at the top of each legging/stocking.  The garter belts are black and have decorative silver, oval-shaped designs spaced among the belt.     COSTUME RESOURCES Sewsewing website     Standard reviewed by the Costume Standards Committee 23 March 2015   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Hera Syndulla

    Hera Syndulla

      CHARACTER DESCRIPTION Hera Syndulla was a Twi’lek female rebel who lived during the reign of the Galactic Empire. A capable pilot, Syndulla was the owner of the VCX-100 light freighter Ghost.  She kept a secret blaster in her boot and was close with Kanan Jarrus, whom she convinced to become a rebel. Source Wookieepedia   REQUIRED ITEMS 1.  Lekku: Accurate light green colour Lekku with detailing visible on the exposed parts of the Lekku. 2. Body Paint: Light green coloured body paint which should match the Lekku colour. 3. Headpiece : Screen-accurate off-white pilot’s headpiece. 4. Goggles: Top piece should consist of a silver frame with tinted lenses on a brown leather or leather like base, these should be either circular or slightly bowed towards the outside of the head.  The goggles should be attached to brown and silver earpieces by silver metal / metallic looking arms, and secured by a brown leather or leather like chinstrap.  The ear pieces should have the detail line on the outer dome. 5. Shirt: Off-white body and sleeves that puff around the lower arm. The shirt collar must have the accurate strap detail.  (A dickie is also acceptable in place of a separate shirt).  6.Vest and Shoulder Pads: Accurate, matching brown leather or leather like material vest and shoulder pads, which should be close in colour to that of the brown parts of the goggles.  Detail lines should be present on the shoulder and chest piece.  Vest should be fitted. 7. Gloves: Large flared dark brown leather or leather-like gauntlet style gloves with wrist strap.  Colour should be clearly darker than the vest and shoulder pads.  Gloves should have 2 detail snaps/rivets present on the outer edge of each side wrist strap. 8. Pants: Gold/light orange flight suit pants with five belt loops.  Pants should end above the waist in the back and rise to the centre of the leather vest in front, where they should appear to be held up by a button or snap, and must also have a leather or leather like detail made of the same material and colour as the vest.  Accurate pockets, knee padding, and fly should be sewn on. Trousers should have cuffed ankles. 9. Leg Strapping and Belt: Light grey leg strapping similar to that of an X-wing pilot on the outside of the legs and pants belt.  Strapping should include the detail pieces similar to a strap adjuster, which should join the strapping that goes around the leg to the strapping pieces that join to the belt.  Pants belt should be made of the same colour material as the leg strapping 10. Boots: Brown leather or leather like boots with low heel, covered by spats in matching colour and material as the vest and shoulder pads.  Boots should have silver/grey foot guards.  Other visible parts of the boots should be plain (e.g. no visible zips, laces, straps, buckles, etc).     OPTIONAL ITEMS 1. Green contact lenses. 2. Accurate Hera pistol and holster on right boot in matching colour material as the boot spats. 3. Accurate communicator on left hand glove strap. COSTUME RESOURCES Star Wars Rebels: The Visual Guide Wookieepedia   Standard reviewed by the Costume Standards Committee 15 Feb 2015   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be...

    read more

    Lobot

    Lobot

      CHARACTER DESCRIPTION Lobot was a Human male who served as the chief administrative aide to Baron Administrator Lando Calrissian on Cloud City over the planet Bespin.  His brain was connected to the city’s central computer which allowed him to communicate directly with the city’s computer network.  In this capacity, he served as the city’s first and only computer-liaison officer. Source Wookieepedia   REQUIRED ITEMS 1. Tunic a. Cream colored undershirt with wide billowy sleeves and cuff at the wrist and stand-up square collar. 2. Vest a. Gray in color (to match references) b. Has a Y-shaped bib section and two pocket flaps. Top stitching is visible near side boarder of bib and side and bottom of pocket flaps. c. Back of vest has parallel pleats at side that goes up and over the shoulder and ends at the pocket flaps near the arm pit. (Similar to shoulder tucks on the Jedi outer tunic, but extends all the way down the back of the vest.) d. Vest may be attached to the pants in a jumpsuit fashion if desired 3. Pants a. Full-length pants in the same color of the vest b. No pockets. 4. Belt a. The belt is black in color, featuring 2 layer construction.  The bottom layer should be of a thin leather like material that wraps around the costumer.  The top layer should be thicker and covered in a leather or leather like material. b. The belt has a wide portion that wraps from the costumer’s right hip to left hip.  The back of the belt is narrow, about 3 inches wide. c. The top layer of the belt contains a rectangular opening in the middle of the front portion to display the greeblies. This thick portion wraps from the costumer’s right hip to left hip. d. Greeblies include in the opening of the belt’s top layer include: 2 large silver discs 2 large black discs with a + configuration on the surface 2 Small black rectangles with silver borders 2 sets of 2 small silver rectangles A single silver rectangle  The bottom portion of a snap e. Connecting the vest and pants is a single small black belt loop piece centered on the back of the vest and pants.  The back of the belt should sit underneath this belt loop. 5. Headpiece a. Accurately shaped headpiece that is gray in color. b. There is a layer of light gray felt-like material over the top rim of the headpiece. c. LEDs can be either functional or not. d. The headpiece is symmetrical. Each of the two sides of the headpiece has the following: -Four red tinted rectangular LEDs in a recessed side panel. Side panel is painted dark blue, that appears black. Black paint is also acceptable. -One red tinted LED in a recessed circle at side of the cheeks. -A row of white LEDs facing backwards under a clear plastic shield, no more than nine LEDs -Two non functioning red tinted LEDs with black o-rings at the base on the back panel. -Four small red tinted LEDs on the front panel. -Accurately placed reflective tape. *Costumer must be bald.  A bald cap can be used to achieve the look. 6. Boots a. The boots are Chelsea style – ankle boots in a gray, closely matching...

    read more

    Cloud City Wing Guard

    Cloud City Wing Guard

          CHARACTER DESCRIPTION The Bespin Wing Guard, informally known as the Bespin Security Guard, Cloud City Wing Guard, or Cloud Police, whose members sometimes were called Bespin cops, was the primary security force of Cloud City on Bespin. Source: Wookieepedia   REQUIRED ITEMS 1. Undershirt a. Shirt is a cream-colored turtleneck made of jersey material b. Only the turtleneck collar of the undershirt is exposed. 2. Jacket a. The jacket is blue in color and made of a matte material b. The jacket closes in the center using Velcro for the closure c. Trim on jacket is very thin almost flat gold piping. Piping goes around the neck down both sides of the jacket and around the back about 1″ inside the jacket edge. There is an additional looped design out of the same trim on the front lower corner of both sides of the jacket d. Jacket has a 3 inch high dart in the center of each side front at the bottom e. The sleeves of the jacket have red cuffs on the forearms that are pointed to a triangular shape on the outer side of the sleeve f. The top triangular points of the red cuffs are trimmed in black g. Jacket is collarless h. Jacket bottom is below the waistline and covers the waistline of the pants.   NOTE: The Jacket, Pants, and Helmet are a dark blue (not navy) in color and should match as closely as possible.  Since the Helmet is a suede like material it might be easier to purchase cream, white or ivory fabrics and then dye them so they all look the same. 3. Pants a. The pants are made of the same blue material as the jacket b. The pants are tucked into the boots c. Pants may close in front with standard fly stitching 4. Boots a. The boots are made of leather or leather-like material. No rubber boots allowed b. Boots come to just below the knee and are black leather. (No suede or vinyl or rubber boots) c. It is preferred that the boots have a visible full-length inside zipper with either a brass or gold colored regular zipper pull – however pull on boots will be permitted or smaller inside zippers. No laces or buckles allowed.   5. Helmet  a. Accurately shaped helmet based on the Ottoman Turkish Kabulak but worn backwards to create the very short visor effect. Material of hat should have a suede like appearance and match the jacket and pants in color. The helmet design is made from 2 belts. Each belt is made of a right and left side. The right and left sides overlap on the top belt in the opposite direction as the bottom belt. The bottom belt sits on top of the upper belt. b. Belts have a dark blue trim on the edges which are visible and make the design of the hat.   OPTIONAL ITEMS 1. Relby K-23 Blaster Pistol in accurately shaped black plastic holster.  Holster may be worn on the right or left hip.   COSTUME RESOURCES 1. Rebel Supporters Forum     Reviewed on 22nd January 2015   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be...

    read more

    Sabine Wren

    Sabine Wren

    CHARACTER DESCRIPTION Sabine Wren was a Mandalorian Human female weapons expert who was active during the reign of Galactic Emperor Sheev Palpatine around five years before the Battle of Yavin. She was also a graffiti artist who customized her armor and tagged a new symbol every time the crew of the Ghost struck Imperial targets. Source: Wookieepedia REQUIRED ITEMS 1. Flight suit shirt should be a stretch material two-piece garment with the top being black with gray panels. Top must have short sleeves and a high collar that splits in the front. 2. Pants should be khaki with light brown panels and long enough to tuck into the boots. 3. Boots must be high enough to stop just below the knee, made of black leather or leather-like material, and fit snug to the wearer. Wedge heel preferred. Must be weathered and paint splattered to match references. 4. Chest Armor should consist of collar armor, right and left chest plates, and center diamond. Should be at least 3mm thick. Chest plates and collar plates should be painted fuchsia/maroon, center diamond should be red. Left chest plate must feature an orange stylized rebel design to match references. Right chest plate must must feature two diagonal stripes painted to match references. All plates must be painted and weathered to match references both in color and weathering pattern. All armor must attach securely to the top with proper spacing. 5. Shoulder Armor must be at least 3mm thick. Must have four points and must curve around the upper arm and shoulder. Right shoulder must be white or light grey with a faded checker pattern. Left shoulder must be mottled orange with a stylized hound illustration in faded fuchsia/maroon. Must be painted and weathered to match references both in color and weathering pattern. 6. Knee Armor must be at least 3mm thick and painted fuchsia/maroon. Right knee must feature a vertical white stripe. Must be painted to match references in both color and weathering pattern. Should have the appearance of being attached by black straps wide enough to cover the knees. 7. Elbow Armor must at least 3mm thick and painted fuchsia/maroon. There should be two plates that appear to connect when the arm is straightened and separate when the arm is bent. Plates should be attached to a black band around the elbow. Must be painted and weathered to match references. 8. Boot Armor must be at least 3mm thick and painted fuchsia/maroon. Armor should be weathered and paint splattered to match references. 9. Gloves must be black leather or leather-like material. Must extend to a few inches below the elbow and be flared “gauntlet” style similar to X-Wing pilot gloves. Gloves should be weathered and paint splattered to match references. 10. Holster Belt must be a medium brown leather or leather like material that secures via metal rectangular buckle in front. Must feature 2 drop holsters with an angular design. Must have two metallic loops on either side of the belt buckle with the holster connecting between the buckle and the loop. Must feature two horizontal metallic loops where the holster connects to the belt in the back. 11. Holsters should hold 2 Westar-35 pistols similar to the ones seen in TCW. Must be a mismatched pair with one being painted blue,...

    read more

    Beru Lars (Episode IV)

    Beru Lars (Episode IV)

      CHARACTER DESCRIPTION Beru Whitesun Lars, the wife of Owen Lars, was a Tatooinian woman who raised Luke Skywalker after the fall of the Galactic Republic. Coming from a long line of moisture farmers, Beru Whitesun grew up near Mos Eisley on Tatooine. On a trip to Anchorhead, she met Owen Lars, the son of another moisture farmer, Cliegg Lars. Beru and Owen fell in love, and Beru later became part of the Lars family. Source: Wookieepedia REQUIRED ITEMS 1. Jumper a. Dark Brown long sleeve v-neck pull over jumper b. V- neck and sleeve hems are topstitched with matching brown thread c. Jumper has a seam at the waist and is no more than 2” above the floor in length d.Skirt part of jumper is A-line with a very slight gather at the waist e.Sleeves should come to the wrist of wearer 2. Undershirt a. The undershirt is a pumpkin or rusty orange colored v-neck undershirt or dickey b. The undershirt has a pattern of small “winged basket” designs that are dark brown in color. See reference images for this pattern c. The undershirt does not need sleeves d. Fabric should be a loose weave if possible e. No buttons should be showing and collar should reach the shoulders of Denim jacket f. Collar is not top-stitched 3. Jacket a. Medium Blue Wash Denim Jacket b. Straight Denim Jacket with pockets has no shoulder seams but has two angled seams in the back instead. These seams are covered with a ¾” wide strip of matching fabric to hide the seam line. This strip goes under the neck trim in the back c. Jacket does not have a collar d. Jacket has a matching trim that goes down the front edges of the jacket and around the neck in back. The trim is narrow in back and very wide in front. Some of the trim on the back should show below the back of the orange collar when worn e. Deep front Pockets are placed to cover at least 1” of the trim f. Trim, hem, and pockets are top-stitched g. Closures are made from 3 pairs of six loops of denim fabric. First pair is placed at the corner of the V at the top. Remaining two loops are spaced evenly down the front of the jacket. Loops should interlace by threading one loop through the other and then over the unattached ends h. Sleeves are about 2-3” above the wrist which allows the brown jumper sleeve to show at all times. Sleeves have a wide cuff at least as wide as the trim in front and are top-stitched. The inside of the sleeve is lined at least halfway up the inside so that the darker side shows on the inside of the cuff when arm is extended. 4. Boots and Socks a. Black or Dark Brown ankle length boots with laces. Hiking boots are ok if solid in color b. Matching socks should be worn and show just above the boot. 5. Hair a. Hair should be worn no longer than shoulder length and should have full side swept bang b. A bob like style is preferred but not absolute c. Naturally-occurring hair colors only OPTIONAL ITEMS 1. Tupperware 640-7 cup for “Blue Milk” 2. Pockets may...

    read more

    Prequel Trilogy Tusken Raider – Male

    Prequel Trilogy Tusken Raider – Male

    CHARACTER DESCRIPTION Tusken Raiders, less formally referred to as Sand People or simply as Tuskens, were a culture of nomadic, primitive sentients indigenous to Tatooine, where they were often hostile to local settlers. The term Sand People was given to them due to their existence in the desert, and was in use from at least around 4000 BBY; but the more formal name of Tusken Raiders was acquired much later, due to a period of concerted attacks on the settlement at Fort Tusken in 98-95 BBY. Although this name is often used as a common term for the race, it actually refers only to the participants of the attack on the settlement. Specialists studying the past of the Tusken Raiders also used the term Ghorfa to denote an earlier sedentary phase of their culture, and lastly Kumumgah, for the earliest stratum of sentient civilization on the planet, believed by some to represent a common ancestry shared by the Ghorfa and the Jawas. In the culture of the Tuskens, to expose any part of the flesh was forbidden and seen as a disgrace. (Source: Wookiepedia) REQUIRED ITEMS 1. Fully wrapped helmet/head similar to one as seen in Episodes I and II: must include cloth wraps (duck cloth, muslin or similar fabric should be used), leather/simulated leather mouth-wraps, 2 tapered/straight eye-stalks with 2 slits cut into the underside of each, 4 head-spikes, 2 blood-spitters, 1 silver nose-piece (tooth) with at least 2 vertical slots, screened lenses so as not to see the eyes and mouth of the wearer. 2. Fabric robe of similar color, texture, pattern to those seen in Episodes I and II. 3. Fabric neck wrap of similar color, texture, and pattern as ones seen in Episodes I, and II. 3. Fabric waist wrap of similar color, texture, and pattern of those seen in Episodes I and II. 4. Sand-colored cloth/leather gloves. 5. Cloth arm wraps covering the arms until concealed within robe(s). 6. Boots/shoes covered with cloth wrappings. (If shoes then cloth leg wraps covering the legs until concealed within robe.) 7. At least one bandolier of similar type/design as seen in Episodes I and II across the chest/waist. 8. Gaffi stick OR Tusken Rifle either/both of similar type/design as found in Episodes I and II. All elements of this costume MUST BE weathered/tattered to simulate living in a barren, desert environment. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Tusken Raider, Male Version 2 (Bantha Rider)

    Tusken Raider, Male Version 2 (Bantha Rider)

    CHARACTER DESCRIPTION Tusken Raiders, less formally referred to as Sand People or simply as Tuskens, were a culture of nomadic, primitive sentients indigenous to Tatooine, where they were often hostile to local settlers. The term Sand People was given to them due to their existence in the desert, and was in use from at least around 4000 BBY; but the more formal name of Tusken Raiders was acquired much later, due to a period of concerted attacks on the settlement at Fort Tusken in 98-95 BBY. Although this name is often used as a common term for the race, it actually refers only to the participants of the attack on the settlement. Specialists studying the past of the Tusken Raiders also used the term Ghorfa to denote an earlier sedentary phase of their culture, and lastly Kumumgah, for the earliest stratum of sentient civilization on the planet, believed by some to represent a common ancestry shared by the Ghorfa and the Jawas. In the culture of the Tuskens, to expose any part of the flesh was forbidden and seen as a disgrace. (Source: Wookiepedia) REQUIRED ITEMS 1. Fully wrapped helmet/head similar to one as seen in EpisodesIV: must include cloth wraps (duck cloth, muslin or similar fabric should be used), leather/simulated leather mouth-wraps, 2 tapered/straight eye-stalks with 2 slits cut into the underside of each, 4 head-spikes, 2 blood-spitters, 1 silver nose-piece (tooth) with at least 2 vertical slots, screened lenses so as not to see the eyes and mouth of the wearer. 2. Robe of similar color, texture, and pattern to those seen in Episode IV. 3. Breather similar to ones seen in Episode IV 4. Fabric waist wrap of similar color, texture, and pattern of those seen in Episodes IV. 4. Sand-colored cloth/leather gloves. 5. Cloth arm wraps covering the arms until concealed within robe(s). 6. Boots/shoes covered with cloth wrappings. (If shoes then cloth leg wraps covering the legs until concealed within robe.) 7. At least one bandolier of similar type/design as seen in Episodes IV across the chest/waist. 8. Gaffi stick OR Tusken Rifle either/both of similar type/design as found in Episodes IV. All elements of this costume MUST BE weathered/tattered to simulate living in a barren, desert environment. COSTUME RESOURCES  Studio Creations Tusken Raider Tutorial TK-899 Tusken Raider Tutorial Parts of Star Wars Tusken Raider A New Hope page Parts of Star Wars Tusken Raider Episode I page Costume standard by Jada, approved by LMO & CSC 1/13/13. For costumes submitted on or after 2/1/13. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Tusken Raider – Male Version 1

    Tusken Raider – Male Version 1

    CHARACTER DESCRIPTION Tusken Raiders, less formally referred to as Sand People or simply as Tuskens, were a culture of nomadic, primitive sentients indigenous to Tatooine, where they were often hostile to local settlers. The term Sand People was given to them due to their existence in the desert, and was in use from at least around 4000 BBY; but the more formal name of Tusken Raiders was acquired much later, due to a period of concerted attacks on the settlement at Fort Tusken in 98-95 BBY. Although this name is often used as a common term for the race, it actually refers only to the participants of the attack on the settlement. Specialists studying the past of the Tusken Raiders also used the term Ghorfa to denote an earlier sedentary phase of their culture, and lastly Kumumgah, for the earliest stratum of sentient civilization on the planet, believed by some to represent a common ancestry shared by the Ghorfa and the Jawas. In the culture of the Tuskens, to expose any part of the flesh was forbidden and seen as a disgrace. (Source: Wookiepedia) REQUIRED ITEMS 1. Fully wrapped helmet/head similar to one as seen in Episode IV: must include cloth wraps (duck cloth, muslin or similar fabric should be used), leather/simulated leather mouth-wraps, 2 tapered/straight eye-stalks with 2 slits cut into the underside of each, 4 head-spikes, 2 blood-spitters, 1 silver nose-piece (tooth) with at least 2 vertical slots, screened lenses so as not to see the eyes and mouth of the wearer. 2. Robes – Inner Robe of similar color, texture, and pattern to those seen in Episode IV. Outer Robe made of a similar color, texture, and pattern to those seen in Episode IV. 3. Breather similar to ones seen in Episode IV 4. Fabric waist wrap of similar color, texture, and pattern of those seen in Episodes IV. 4. Sand-colored cloth/leather gloves. 5. Cloth arm wraps covering the arms until concealed within robe(s). 6. Boots/shoes covered with cloth wrappings. (If shoes then cloth leg wraps covering the legs until concealed within robe.) 7. At least one bandolier of similar type/design as seen in Episodes IV across the chest/waist. 8. Gaffi stick OR Tusken Rifle either/both of similar type/design as found in Episodes IV. All elements of this costume MUST BE weathered/tattered to simulate living in a barren, desert environment. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Tusken Female

    Tusken Female

    CHARACTER DESCRIPTION Tusken Raiders, less formally referred to as Sand People or simply as Tuskens, were a culture of nomadic, primitive sentients indigenous to Tatooine, where they were often hostile to local settlers. The term Sand People was given to them due to their existence in the desert, and was in use from at least around 4000 BBY; but the more formal name of Tusken Raiders was acquired much later, due to a period of concerted attacks on the settlement at Fort Tusken in 98-95 BBY. Although this name is often used as a common term for the race, it actually refers only to the participants of the attack on the settlement. Specialists studying the past of the Tusken Raiders also used the term Ghorfa to denote an earlier sedentary phase of their culture, and lastly Kumumgah, for the earliest stratum of sentient civilization on the planet, believed by some to represent a common ancestry shared by the Ghorfa and the Jawas. In the culture of the Tuskens, to expose any part of the flesh was forbidden and seen as a disgrace. (Source: Wookiepedia) REQUIRED ITEMS 1. Golden-Bronze Female Tusken mask: ( suggested to have some green tint to give it a weathered copper look). The forehead portion has 3 “jewels”, there’s a wire mesh visor, 4 divots in the nose/cheek area. The“bib” has 9 chinks each with an oval in the center and one long piece at the bottom, 5 bones in the center, a half circle at the end of the bones. 2. Layered Shawl/Burka – Weathered Tan/Sand Monk material (or similar) lighter than the dress. The shawl length should end below the knees and be somewhat formfitting. 3. Dress/Inner Robe: Lighter weight Monk material (similar to shawl) Full skirted, Dress can be short sleeved or long sleeved (see note on arm wraps). Must be weathered, especially at the bottom. 4. Weathered, Tan/mustard colored cotton or leather gloves . NO satin or velvet. 5. Weathered bronze color tribal design bracelets. 6. Gauze or muslin Arm wraps, wrapped up to the elbow. If dress is short-sleeved , there must be no visible skin.. 7. Shoes/Boots must be covered in weathered muslin or gauze strips of cloth (maybe cutaway on the bottom of the soles for safety). The wraps must go up the legs w/no visible skin 8. Sturdy leather or leather like material bag/purse. Rectangle or long “half” oval shape with a half circle bone or bone like clasp in the front. 9. Belt/Sash – Gauze or similar material cloth belt/sash OPTIONAL Papoose- Cloth wrapped Tusken Raider child carrier Tusken Raider Child Gaderffii (gaffi stick)- of similar design to the styles used in Episode 2 and Episode 4. Credited: Jada (Hope “Jada” Diaz) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Sharad Hett (Tusken)

    Sharad Hett (Tusken)

    CHARACTER DESCRIPTION Sharad Hett was a powerful male Human Jedi Knight who lived during the decades of relative peace prior to the Invasion of Naboo. A heroic and legendary figure in the pre-Clone Wars Galactic Republic, Hett was well known throughout the ranks of Jedi Order. He eventually grew weary of his fame and, after a disaster that destroyed his homeworld and killed his family, exiled himself to Tatooine, where he became the warlord of a tribe of Tusken Raiders. He sired a son, A’Sharad Hett, in this period, and continued to lead the Tuskens until the Jedi sent a representative to retrieve him—Ki-Adi-Mundi. During a war between the Tuskens and the Hutts of Tatooine, Sharad Hett was killed by Aurra Sing. Honoring the Jedi’s final wish, Ki-Adi-Mundi took A’Sharad back to Coruscant as his Padawan. Many decades after Sharad’s death, A’Sharad would fall to the dark side and become the infamous Darth Krayt, ruler of the One Sith. Source: Wookipedia REQUIRED ITEMS 1. Mask/Helmet – Traditional Tusken helmet with 4 or 6 spikes, weathered cloth wraps, leather snout, eye stalks, nose pick, blood spitters. Eye stalks must have red lenses at opening. 2. Tunic – Weathered blue (should be shades close to dodgerblue4 #104E8B). The sleeves (3/4 sleeves) and neckband should be hemmed while the bottom is tattered.  3. Neck wrap – should be the same color as the helmet wraps and tucks into the tunic. 4. Pants – weathered dark khaki pants 5. Arm wraps – should be visible and wrap past the hem of the sleeves and not let any skin show. Wraps should be weathered. 6. Gloves – weathered tan gloves 7. Leg wraps/foot wear – Leg wraps must go ¾ way up calf. Either a boot or a shoe can be used and must be wrapped. If a shoe is used the leg wrap must blend into the shoe and not let skin show. 8. Bandoleers/Ammo belt/Rebreather – 2 Enfield style bandoleers are worn cross-chest style. Bandoleer coming over the right shoulder has two silver cylinders that are connected by a U-shaped coupling forming a rebreather above the pouches. Ammo belt is worn around the waist with a total of 8 ammo boxes which may be worn 3 in front/5 in back or 4 and 4. 9. Lightsaber – non-toy lightsaber (if bladed blade must be red) OPTIONAL ITEMS Lightsaber – Sharad Hett’s lightsaber Gaffi – either a traditional gaffi stick or Sharad Hett’s gaffi with Krayt Dragon Claw at the end. Tabards – costume may include tabards that are the same color as the tunic and are weathered and tattered on the bottom edge. Arm wraps – may be worn on the outside of sleeve and up to the elbow COSTUME RESOURCES Reference photos Standard by Jada Diaz Added by LMO 10/26/11 Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Twi’Lek Slave Dancers

    Twi’Lek Slave Dancers

    CHARACTER DESCRIPTION Twi’leks, sometimes referred to disparagingly as “Tail-heads”, were an omnivorous humanoid species originating from the planet Ryloth. Twi’lek females were often used as slaves or dancers because of their beauty. Entertainment slaves were forced typically to wear revealing outfits to please their masters (or their master’s guests) and submit to them. These were usually slaves to criminals, rather than major organizations. Notable examples included the Twi’lek Oola and Leia Organa Solo, who were enslaved by Jabba Desilijic Tiure. Source: Wookiepedia     REQUIRED ITEMS Lekku in color that matches painted face and exposed painted skin color, preferably skin-like appearance as opposed to fabric finish Leather or clothe head wrapping Accurate ear-caps Dancer clothing similar to what is seen on screen or in reference material Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Oola (Twi’lek)

    Oola (Twi’lek)

    Required Items: Green skin Lekku in green, preferably skin-like appearance as opposed to fabric finish Leather head wrapping Accurate ear-caps Netting bodysuit Sandals Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Lyn Me (Twi’lek)

    Lyn Me (Twi’lek)

    CHARACTER DESCRIPTION Lyn Me was a Twi’lek dancing girl. She performed with the Max Rebo Band while they played at Jabba’s Palace. Twi’leks, sometimes referred to disparagingly as “Tail-heads”, were an omnivorous humanoid species originating from the planet Ryloth. Twi’lek females were often used as slaves or dancers because of their beauty.Entertainment slaves were forced typically to wear revealing outfits to please their masters (or their master’s guests) and submit to them. These were usually slaves to criminals, rather than major organizations. Notable examples included the Twi’lek Oola and Leia Organa Solo, who were enslaved by Jabba Desilijic Tiure. Source: Wookieepedia     REQUIRED ITEMS White body color White Lekku Leather headgear Leather strapping of Lekku and body Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Bith Musician

    Bith Musician

    CHARACTER DESCRIPTION This unidentified Bith lived in the Galactic City of Coruscant and worked as a musician along with two other Bith and an Ithorian in a cantina. Around 21 BBY, when bounty hunters Robonino and Chata Hyoki came to the cantina to discuss their plan to assassinated senator Padmé Amidala with Count Dooku, this Bith was playing a drum like instrument. Source: Wookipedia REQUIRED ITEMS Accurate Bith mask – closure must not be seen and can be covered by shirt Accurate Bith hands Tailored black or navy blue jacket with high Mandarin collar. Buttons must be same color as shirt. Light brown or grey pants Brown or Black boots (mid-calf) OPTIONAL ITEMS Screen accurate instrument ADDITIONAL IMAGES http://img.photobucket.com/albums/v139/SithJada/lcj/bith2.jpg http://img.photobucket.com/albums/v139/SithJada/lcj/Bith.jpg Standard by Jada Diaz. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    Willrow Hood – “Ice Cream Maker Guy”

    Willrow Hood – “Ice Cream Maker Guy”

    CHARACTER DESCRIPTION Willrow Hood was a Human male miner who lived and worked on Cloud City, a floating station located above the gas giant Bespin. He worked for A’roFilter, a mining company sympathetic to the Alliance to Restore the Republic, as the head of the department responsible for dealing with the Rebel Alliance, supplying discounted Tibanna gas. Eventually, though, the Galactic Empire invaded and conquered the planet; in order to protect the Rebellion contacts Hood was responsible for, the miner took A’roFilter’s main computer’s memory core, as it contained the encrypted information on Rebel contacts. After finding the nearest disposal unit, Hood dumped the entire core, rather than risk it falling into the wrong hands; thus, Willrow Hood was able to save the Alliance’s interests. Hood remained on Cloud City throughout the Imperial occupation, suffering imprisonment and torture but revealing nothing. Source: Wookipedia REQUIRED ITEMS 1. Orange flight suit with mandarin-style collar and pointed tab, code cylinder pocket on upper left arm, rectangular pocket with a flap closure on upper right arm, and thigh pockets (upper set required, lower set optional). No visible zippers or snaps. 2. Mid-calf black boots (Jack boots or engineer boots are acceptable. No lace up boots. High-Calf boots are acceptable with sufficient blousing of the flight suit legs.) 3. Old vintage motorized white or light colored ice cream maker. 4. Code cylinders in left shoulder pocket. Two minimum, three maximum. 5. Comm pad visible inside comm pad pocket on lower left arm. 6. Hair, mustache and sideburns of a natural hair color matching your own color need to be a similar style seen on the character. Wigs (and fake mustaches/sideburns) are permitted, but must appear natural. As with any face character, you must try to resemble that character. Updated: August 26, 2013 Reviewed by the Rebel Supporters Forum Members: July 29, 2013 to August 11, 2013. Reviewed by the Costume Standards Committee: August 9, 2013 to August 26, 2013. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more

    The Tonnika Sisters

    The Tonnika Sisters

    The Tonnika sisters were identical twins who became infamous con artists under the New Order. Individually, they were Brea and Senni Tonnika, although they often pretended to be just one woman, Bresenni. In 0 BBY, they earned additional fame for being in the Mos Eisley Cantina when Luke Skywalker first met Han Solo, but in fact, the “Tonnika sisters” in the Cantina were the Mistryl Shadow Guard warriors Shada D’ukal and Karoly D’ulin, masquerading as Brea and Senni in the course of a mission. Source: Wookipedia. REQUIRED ITEMS 1. Long-sleeve unitard/catsuit with a seam up the front middle and zipper up the back, made from matte/non-shiny fabric. a. Olive/dark green in colour for the green sister. b. Navy/dark blue for the blue sister. 2. Boots: close-fitting, calf-high black leather/leather-like boots with a flat sole. Plain boots, no visible zipper, laces, buckles etc. 3. High-leg briefs worn on top of the unitard/catsuit. a. Light green (not fluorescent) for the green sister. b. Light blue (not fluorescent) for the blue sister. 4. Collar and cuffs. Black and light green/light blue (same color as the briefs): a. Collar: a triangular shaped collar with a point at the midline on the front, back and each shoulder with alternating panels of light green/light blue and black matte/non-shiny fabric (four panels of green/blue and four panels of black). The light green/light blue panels are made from the same fabric as the briefs. There is a thin black trim around the edges of the collar. The points of the collar reach down to the bust line and to the tips of each shoulder. b. Cuffs: made from the same fabrics as the collar. The cuffs are longer on the top of the arm than underneath. Black panel on top and light green/light blue panel underneath. Thin black trim around the edges of the cuff. Cuffs are approximately half the length of the forearm. 5. Black leather/leather-like belt, approx. 2”-2.5” wide with a buckle on the front. Buckle consists of a flat rectangle, a circle on top of the rectangle and a flat-bottom pyramid in the middle of the circle- all matt silver in color. The belt has 3 sets of 4 silver metal squares, starting from approx. 1” from each side the buckle outwards to the hips. 6. Garter around right thigh. Black elastic approx. 1” wide with thin, red vertical stripes the full circumference of the garter. 7. Black hair. A ‘beehive’ on top of the hair with thin plaits wrapped around it horizontally from top to bottom. Armpit-length, loose black hair hangs down from the beehive, with a few single plaits hanging down. a. Green sister has a single plait across the forehead below the hairline. b. Blue sister has 3 – 4 rows of plaits across the forehead below the hairline. 8. Makeup: a. Fingernails painted with matt silver nail varnish or false nails, painted with matt silver nail varnish. b. Green lipstick, eye shadow and eyeliner on the face for the green sister. c. Blue lipstick, eye shadow and eyeliner on the face for the blue sister. OPTIONAL ELEMENTS Gold bangle/bracelet on left wrist on the green sister only. If this costume is done as a pair, the green sister is ideally taller than the blue sister White handled smoking pipe, cylinder-shaped,...

    read more

    Owen Lars (Episode III)

    Owen Lars (Episode III)

    CHARACTER DESCRIPTION Owen Lars was the son of moisture farmer Cliegg Lars and the stepbrother of Anakin Skywalker. He married Beru Whitesun, and after his father’s death, he inherited his job as a moisture farmer. In 19 BBY, Beru convinced Owen to adopt Anakin’s son, Luke Skywalker, as Anakin had turned to the dark side and become the infamous Darth Vader. Owen and Beru raised their nephew as well as they could, and Owen instilled into Luke the values of his own childhood. Fearful of Luke’s potential, and distrustful of the outside galaxy, Owen attempted to keep Luke isolated and ignorant of his true parentage. Source: Wookieepedia.     REQUIRED ITEMS Brown/multi-colored mock neck shirt with self-bias at the neck. Tan/sand colored long sleeved tunic with binding at neck and front edge (approximately two inches in width)and overlapping right over left just above waistline. Medium tan pants. Medium brown leather or pleather boots with gray torn fabric strips wraps from the upper calf (just below the knee) to ankle (boot shaft must be covered by fabric strips). Brown belt and buckle with bronze colored buckle with a geometric design and two pouches with geometric designs. OPTIONAL ITEM Costumer should have a “5 o’clock shadow” or short trimmed beard and mustache. Updated: September 6, 2013 Costume Standards Committee Review: July 10, 2013 – August 12, 2013. Rebel Supporters Forums Review: August 12, 2013 – September 6, 2013. Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

    read more