Mara Jade (Green dress)
Jun14

Mara Jade (Green dress)

  CHARACTER DESCRIPTION Mara Jade Skywalker was, during different times in her life, an Emperor’s Hand, a smuggler, and later a Jedi Master who sat upon the Jedi High Council. She was raised as a servant to Emperor Palpatine and became a high-level Force-using operative. After Palpatine’s death, she received his last command, which was to kill Luke Skywalker; however, the death of her Master caused her to go rogue. Eventually she joined smuggler chief Talon Karrde, becoming one of his best smugglers and his second-in-command. During the predations of Grand Admiral Thrawn, she was forced to work with Skywalker, and developed a grudging respect for him. During the Galactic Civil War, Mara Jade proved herself skilled in a variety of fields; she was a good pilot and mechanic and trained in the use of both a blaster and hand-to-hand combat even without relying on the Force. Source Wookieepedia REQUIRED ITEMS 1. Dark green or grass green dress with a rounded neck line; mid-calf length, with a loose, flowing skirt.  Sleeves should be gathered to a cuff. 2. Wrap around overskirt of the same fabric as the dress.  Overskirt does not meet in the center, and has a hemline that is shorter on one side 3. Black leather or leather like belt, two (2) to two and half (2.5) inches wide, with a rectangular silver buckle approximately two (2) to two and half (2.5) inches wide. Belt and buckle width must match. The belt should be proportional to wearer. 4. Brown, flat soled, mid-calf height boots. Boots should be completely wrapped with strips of fabric or leather in a medium to dark brown color. 5. A round, brown leather or leather like shoulder bag approximately 8-10 inches across, with appropriate patterns.  Strap should be long enough to be worn across the body, and be approximately 2 inches wide.  No beading, fringe, outside pockets, or other embellishments are permitted 6. Round silver brooch, approximately three (3) inches in diameter, with a raised, circular area in the center and a raised border. 7. Shoulder armor covered in a brown leather or leather like material, closely resembling what is shown in this illustration. Each piece is a different size, and is three dimensional. 8. Luke Skywalker ANH or ESB lightsaber hilt. (Anakin ROTS is also acceptable). 9. Long red hair, with a single, three-strand braid tugged over the right shoulder. A short, Padawan style braid may be worn on the left side of the head. MARA JADE – TUNIC AND PANTS (Vision of the Future Cover): 1. Dark green tunic of mid-thigh length, with long fitted sleeves. Tunic bottom can be slightly pointy with a very soft/flat V shape. 2....

Read More
A’Sharad Hett (Before/After Order 66)
Jun14

A’Sharad Hett (Before/After Order 66)

  CHARACTER DESCRIPTION Darth Krayt, born A’Sharad Hett, was a Human male who served as a Jedi Master in the waning days of the Galactic Republic.  The son of legendary Jedi Knight Sharad Hett and his wife K’Sheek, both of whom lived among the Tusken Raiders of Tatooine, he eventually became the Padawan of Jedi Masters Ki-Adi-Mundi, and later, An’ya Kuro. Source Wookieepedia REQUIRED ITEMS 1. Chocolate/dark brown vested tabards with raised collar: Tabards may be closed under the arms or open. Tabard length must extend past outer tunic, but the back of the tabard is closed to one piece. Tabards are not tattered. Tabards can be made of leather/leather like material or heavy fabric. 2. Beige Outer Tunic. (OT): Outer Tunic must extend mid-thigh in length. Collar should be approximately 2 inches in width. Sleeves can be shortened and cuffed in order to fit into the wrist wraps without being bunched. Sleeves are ‘un-tucked’ at the shoulder. No Kimonos, karate/judo gi or gi like construction allowed. Outer Tunic is not tattered. OT should be closed left front panel over the right front panel, with no visible closure mechanism. *Optional: Light sand staining 3. Beige/tan turtleneck inner tunic (IT): Collar of turtleneck must reach up to jawline. May be full or false tunic. 4. Wrist wraps in beige/greyish beige: Must go over sleeves of OT and under gloves, extending up just short of elbow. Must be of heavy cloth (example: Bull Denim). Wrist wraps must not show gaps or skin underneath. *Optional light sand staining, light tattering 5. Beige Obi (sash): Should be of same material as OT. *Optional: light sand staining 6. Pants: Should be either Chocolate Brown or Beige Cotton Twill. Pockets should be covered by OT Skirting. Pants should not be worn or stained 7. Boots: Boots are to be of a wrapped style of similar material and color as wrist wraps. Boots have visible traction sole. No visible zippers or laces. 8. Gloves (not always worn when helmet is removed): Dark brown leather/leather like material with no visible trademarks and minimal design. Wrist of gloves is turned inside out to cuff. 9. Belt: Brown OR style belt. The belt consists of two belts, a wider inner (against the Obi) belt approximately 2.25 inches in width and an outer belt approximately 0.75 inch in width. The thinner outer belt is held in place with eight (equally spaced) silver button studs. Must have at least 1 set of 4 Food Capsules, 2 Covertec clips (one on either hip), and a minimum of 4 pouches 10. A’Sharad Hett’s Lightsaber: Hilt is wrapped in brown leather, may be laced. Must...

Read More
Generic Old Republic Jedi
Mar18

Generic Old Republic Jedi

  CHARACTER DESCRIPTION The Jedi Order, later known as the Old Jedi Order and referred to as the Holy Order of the Jedi Knights, was an ancient monastic peacekeeping organization unified by its belief and observance of the Force, specifically the light side. Source Wookieepedia   REQUIRED ITEMS 1.   Under Tunic: Brown, tan, or off-white in color and should match the Inner Tunic. Wraps right over left and is fitted to the body.  2. Inner Tunic: Brown, tan, or off-white in color and typically contrasts with the Outer Tunic. Wraps left over right and is fitted to the body. 3. Outer Tunic: Brown, tan, or off-white in color. Wraps left over right and is fitted to the body. Does not visibly extend below Obi. 4. Sleeves: Tan or off-white in color.  May be part of either Outer Tunic or Inner Tunic. Extend to the wrist and are fitted to the arm. 5. Pants: Tight fitting, Tan, brown, or off-white in color.  No visible pleats or pockets and fitted. 6. Obi: Brown, tan, or off-white in color.  Worn over Pants and Outer Tunic but below Robe and Belt. Does not extend visibly below belt. 7. Robe: Brown or off-white in color and of looser fit.  Sleeves end just above the elbow.  Hood attaches at the lapel and continues around the neck line.  The Robe does not close in front and should wrap roughly 3/4 around the costumer.  Lower portion of of the Robe an A-line skirt that ends just above the ankle. 8. Belt: Brown or metallic wide (~3″ depending on costumer) belt worn over Robe.  Belt closures (Velcro, snaps, etc.) should not be visible.  No Earth-bound buckles. 9. Boots: Brown in color with no visible laces or outside zippers.  Shaft should extend at least to mid-calf but below the knee.  No rubber boots. 10.  Lightsaber: (No toy sabers, no movie hero sabers, no Ultimate FX short saber).  The lightsaber may be a static prop (hilt-only).  Metal hilt lightsabers are preferred, though custom lightsabers constructed of other materials are permitted.  Attached blade(s), LED lights, and sound effects, are allowed but not required.  Blade colors accepted are: blue, green, yellow, orange, white and violet.  No red, pink or black blades.  Double-blade sabers are allowed.  The saber may be attached to the belt with either a Covertec clip or a hook and d-ring     OPTIONAL ITEMS 1. Tabard: Brown, tan, or off-white in color. Scarf style tabard worn around the neck and under the Obi. Extends below belt to upper thigh. Ends of tabard are of a contrasting brown, tan, or off-white color. 2. Outer Tunic may extend below the belt in a central panel...

Read More
Satele Shan
Feb09

Satele Shan

  CHARACTER DESCRIPTION Satele Shan was a human female who served as the Jedi Order’s Grand Master during the Cold War and the Galactic War between the Galactic Republic and the Sith Empire.  The daughter of Jedi Knight Tasiele Shan, who was herself a descendant of the legendary Jedi Knights Revan and Bastila Shan, Satele was born on the planet Brentaal IV in the year 3699 BBY.  Inheriting her family’s Force-sensitivity, she was inducted into the Jedi Order and became the Padawan of Jedi Master Ngani Zho, though she later traveled to the Sith homeworld of Korriban to study under the Zabrak Battlemaster Kao Cen Darach. Source Wookieepedia   REQUIRED ITEMS 1.  Brown Leather or leather looking tunic with a mandarin collar, tunic has a distinctive swirl pattern and gold piping.  2. Quilted brown tight fitting stretch pants (they have vertical quilting). 3. Gauntlet fingerless gloves in brown: Brown leather/leather like gauntlets Under arm portion has an armored piece Tops of the gauntlet must have accurate design to reference pictures Brown fingerless gloves have an armor piece/hand plate with a similar design to the belt buckle. 4. Thigh high flat boots with gold piping. Legs have three pieces of armour attached via leather/leather like straps. Two armour pieces in correct shape just below the knee. Shin armour in correct shape with straps at the top and at the ankle. Each strap has a plain square buckle/armour attachment at the back in silver/gun-metal. Please see reference links for a visual guide. 5. Oval shaped knee armour in silver/gun-metal with a smaller oval piece with gold trim.  Leather/leather like strap attached. 6. Belt in brown.  Has four pouches on it.  Two small in the back, one larger square size at the hip, and one in the front next to the belt buckle in a more rectangular boxy square shape.  All are brown. 7. Large Oval belt buckle in silver/gun-metal grey with four red vertical lines starting at the top of the buckle and going 3/4 of the way down.  Two indents on each side of the buckle.  Please see reference links for a visual guide. 8. Hair tied into 4 thin, approximately shoulder-length braids, two at the front, two at the back.  Braids have 2 silver hair beads on each, one at the top of the braid strand and one towards the bottom.  Natural hair colors only. 9. Lightsaber hilt: accurate hero hilt (from either trailer or game) preferred, or custom double bladed lightsaber of similar style.  If bladed they must be blue (two blades).  No toy or Darth Maul lightsabers. 10. Brown leather arm band with a silver/gun metal grey attachment with three vertical red...

Read More
Obi Wan Kenobi (Mandalorian Super Commando Armour)
Jan31

Obi Wan Kenobi (Mandalorian Super Commando Armour)

  CHARACTER DESCRIPTION Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter.  His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area.  It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life. Source Wookieepedia     REQUIRED ITEMS 1. Flightsuit: -Black or charcoal grey in color. -Has traditional Mandalorian style double sleeves. -No pockets should be visible 2. Vest: -Black leather heavy cloth-like like vest. -Shoulders should flare outward like wings. -“Jango Style” vest is preferred. -Bottom of vest should end just after the bottom of the chest / back armor, and not be tucked into the girth belt, to allow for some flightsuit to show. -Black Neckseal may or may not be attached to the vest. 3. Chest armor: -Consists of collar armor, left and right breast plates, a center diamond, and an abdominal plate. -Must be made of a solid material such as fiberglass, styrene or sintra. -Must have dimension and give the feeling of thickness and depth. -The collar, center diamond, left, and right chest pieces are red with light grey weathering. -The abdominal plate is painted light grey with red weathering. -The left breast plate must have two indented horizontal bars, painted to match the color scheme of the rest of the plate. -The center diamond plate between breast plates must have a raised vertical rectangle as shown in the visual reference. -All pieces must attach securely to the vest. 4. Shoulder Armor: -Must have dimension and give the feeling of thickness and depth. -Shoulder armor is red. -Shoulder armor should flare out off the shoulders to present a wider than normal silhouette. 5. Gauntlets: -Gauntlet color is charcoal grey. -Gauntlets taper towards the wrist. -Gauntlets have a seam on the inside of the arm with indents on either side of the seam as shown. -Gauntlets have a stepped detail on the top center as shown. -Left gauntlet has a Mandalorian compad attached on the top, near the wrist. 6. Gloves: -Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin. 7. Handplates: -Must have dimension and give the feeling of thickness and depth. -Symmetrical, angled tombstone shaped handplates. -Color is charcoal grey. 8. Backplate: -Must have dimension and give the feeling of thickness and depth. -Color is charcoal grey, with red...

Read More
Kanan Jarrus
Jan31

Kanan Jarrus

  CHARACTER DESCRIPTION Kanan Jarrus, born Caleb Dume, was a Human male Jedi Padawan who survived Order 66.  Going into hiding, he forsook the Jedi ways for sometime, swapping his blue-bladed lightsaber for a blaster. Eventually, he would come to command the VCX-100 light freighter Ghost several years before the Battle of Yavin.  While cocky and often sarcastic, Jarrus was eager to help out and fight the Galactic Empire.  Five years before the Battle of Yavin, Jarrus met Ezra Bridger, a fourteen-year-old Force-sensitive Human, whom he decided to mentor. Source Wookieepedia   REQUIRED ITEMS 1. Shirt must be made with vertical panels in the front and a panel that extends across the chest and down the top of the left sleeve.  The shirt have NO right sleeve and a collar that splits in the front.  The shirt color should be a yellow or olive tan and the top panel must be darker than the rest of the shirt consistent with references.  There should also be a grey triangle just beneath the collar split consistent with references.  A dark grey or black long sleeve under armor type shirt with a collar is worm underneath, so that only the collar and right sleeve are visible. (Must be consistent with references) 2. Fitted grey pants with no visible pockets.  Front seam and closing must be consistent with references 3. Leather or leather like boots must be a grey/brown color with tan horizontal panels in a vertical line along the front of the entire boot.  There must be a brown strap across the instep of the boot consistent with references 4. The belt must be 1 1/2 – 2 inch dark grey or black leather and have a silver buckle of a custom design consistent with references.  The beck of the belt must also have a silver buckle.  There must be a holster with a silver attachment which attaches to the front bottom right of the front buckle and the bottom right of the left buckle.  The holster be a box type and have a leg strap to attach to the right thigh.  All straps must be either dark grey or black 5.A pair of dark grey or black formfitting fingerless gloves is worn on both hands.  The material should be similar to the right sleeve and match in color.  The right glove should have a custom piece of dark green armor on the handback 6. Armor pieces are worn on the right arm, chest, and knees. The armor is dark green and weathered consistent with references. – The chest piece covers the right side of the chest and goes over the shoulder to...

Read More