Shado Vao
Nov22

Shado Vao

  CHARACTER DESCRIPTION Shado Vao was a male Rutian Twi’lek Jedi Master who was the apprentice of Kol Skywalker and a close friend to Kol’s son, Cade Skywalker during the time of the Sith–Imperial War and the subsequent Second Imperial Civil War against Darth Krayt and the One Sith. (Source: Wookieepedia) REQUIRED ITEMS 1. Body: Blue coloured skin (matching the lekku). 2. Headgear: Black Headpiece that covers the head, and approximately the first 1/3 of the lekkus and a part of the face. Black stripes. 3. Collar: High, brown leather or leather-like collar with hole – pattern. It is in the front open and will be closed with a small rack at the bottom. 4. Inner tunic: Black inner tunic. 5. Outer tunic: Light grey outer tunic with wide sleeves that are covered with bracers at the forearm. 6. Plaid: Grey sleeveless plaid that lasts at least over the knees and is open on both sides. 7. Obi: Same colour as the inner tunic. 8. Trousers: Same colour as the outer tunic. 9. Belt: Brown leather or leather like belt in the same colour as the collar. Big square silver/metal belt buckle, the buckle has 2 level slots, fixed with 2 rivets on each side (like seen on the pictures) 4 square brown pouches. 10. Tabard: One big leather or leather like tabard with hole-pattern (same colour and pattern like the collar). It covers the whole belly down to the crotch. 11. Bracers: Brown leather or leather like bracers with hole-pattern (same colour and pattern as collar and tabard) The bracers covers the forearm. On the inner side they are fixed with 2 straps made out of the same material. 12. Gloves: Black gloves that covers the knuckles up to the forearm. (under the bracers). The fingers are not covered. 13. Boots: Black knee high boots. The shin is covered by a metal plate (from ankle to just below the edge of the boots) 14. Lightsabre: Blue double bladed lightsaber with silver/metall hilt. (no toy or Ultimate FX sabers allowed). COSTUME RESOURCES KJO Detachment Standard written by Author: Lokrin (Florian) Standard reviewed by the Costume Standards Committee: 22 November 2016 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the Detachment Officer for your category about parts/materials you are considering before you start your build, or post a ‘Work in Progress’ (WIP) thread on the forum. (LCJ...

Read More
Xiaan Amersu (Aayla Secura Comic)
Nov22

Xiaan Amersu (Aayla Secura Comic)

  CHARACTER DESCRIPTION Xiaan Amersu was a female Rutian Twi’lek Jedi Knight who fought during the Clone Wars. She was the Padawan of J’Mikel, an Anx Jedi killed by the bounty hunter Aurra Sing. (Source: Wookieepedia) REQUIRED ITEMS 1. Body: Blue-Green body colour. 2. Lekku: Lekku matching body colour. 3. Headgear: Dark brown leather or leather like headgear with a silver metal ornament with wide bands above the tips of the lekku. 4. Ear caps: Ear caps matching body colour. 5. Top: Light brown lowcut tunic/shirt with long, loose sleeves and long, fitted sleeves. Can be made as two shirts/tunics. 6. Tabards: Medium to dark brown tabards which reach below the knee (front and back) and are pointed to the inner side. The tabards are wider than usual and go over the edge of the shoulders. They must not sag. 7. Obi: Medium to dark brown obi. Must match tabards 8. Leggings: Light brown leggings. 9. Belt/aprons: Dark brown leather or leather-like jedi belt with silver buckle. 10. Boots: Dark brown over knee leather or leather-like boots. 11. Covertec clip: Covertec clip (original style). 12. Lightsaber: 1 silver Lightsabers (no toy or Ultimate FX sabers allowed). OPTIONAL ITEMS 1. Lightsaber: A second silver Lightsaberhilt. COSTUME RESOURCES KJO Detachment Standard written by Author: Leroni Verderoc Standard reviewed by the Costume Standards Committee 22 November 2016 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the Detachment Officer for your category about parts/materials you are considering before you start your build, or post a ‘Work in Progress’ (WIP) thread on the forum. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

Read More
Juhani (Knights of the Old Republic)
Jul06

Juhani (Knights of the Old Republic)

  CHARACTER DESCRIPTION Juhani was a Cathar female and a Knight in the Jedi Order during the Jedi Civil War. Juhani grew up on the planet Taris after her family escaped the assault on their homeworld during the Mandalorian Wars. In addition experiencing great hardship and xenophobic discrimination, Juhani was sold into slavery after the death of her parents in order to pay off their debts. Juhani was eventually discovered to be Force-sensitive by the Jedi Knight Revan, and freed from her servitude. She then made her way to the Jedi Enclave on Dantooine and was accepted for Jedi training by Jedi Master Quatra..  (Source: Wookieepedia) REQUIRED ITEMS 1. Teal matte body suit. Body suit must not be baggy or have any visible closures. The only skin that should be visible are hands and face. 2. Leather or leather-like medium browns vest, hip length. two center front panels taper down the front, wider at the shoulder than the waist with a center front closure in the darker medium brown, clasped with three thin metal clasps silver or light gold in color. There are two lighter brown side panels and a single knee-length ‘tail’ panel in the back in the darker medium brown. There must be an accurate layered collar piece with no center front seam and a high, rounded collar. 3. Leather or leather-like ovular shoulder pauldrons with rounded tube-like edging and two decorative panels on top. Pauldrons should match the darker color(s) of the vest. 4. Leather or leather-like arm guards with rounded rectangular decoration on the forearm extending from the elbow and stopping short of the wrist. 5. Knee-high boots, spats, or boots/spats combination in the same color as the vest. Boots should have heels no higher than 2 inches (5 cm). The back of the leg should have ribbed-looking texture while the front should appear leather-like. There should be four thin straps of a slightly darker brown color across the back of the boot leg without visible clasps. 6. Thin brown leather or leather-like belt with a rectangular shiny belt buckle (silver or light gold color). One brown leather or leather-like belt pouch on the right hip. The belt and pouch should be a darker brown color.  7. Lightsaber; blue/cyan colored blade if blade is present. 8. Head must appear to be bald except for a high ponytail. The ponytail should be held up with a metallic gold wrapped cord or stacked gold rings at the base. Ponytail hair should be separated into many thin braids, no fewer than 8 individual braids. Each braid should be tipped with a long, cylindrical gold bead. Natural hair colors only,...

Read More
Ord Mantell Officer (Star Wars: TOR)
Aug17

Ord Mantell Officer (Star Wars: TOR)

  CHARACTER DESCRIPTION Star Wars: The Old Republic is a massively multiplayer online role-playing game (MMORPG) based in the Star Wars universe. Source Wookieepedia REQUIRED ITEMS 1. Shirt: Burnt orange, short sleeved shirt with collar and black yoke. Shirt has a double seam down the center front, no visible buttons. Sleeves should end no longer than two inches above the elbow. Yoke extends to the back of the shirt, and ends approximately at the shoulder blades. Right sleeve has a three dimensional pocket with a flap that closes with a snap. This pocket should be black. Rank pins on collar. Long black under sleeves. Yoke, pocket, and undersleeves should be the same shade of black, preferably the same fabric. 2. Trousers: Close fitting black pants with panel or pocket on the side of each thigh. Should be the same shade of black as the under sleeves and shirt yoke. No front or rear pockets. 3. Belt: Black leather, 2.5 to 3 inches wide. Large metal buckle, rectangular shaped. 4. Boots: Black leather or leather like, flat heeled boots.  No visible zippers or buckles.  Boots should end below the knee (approx 11-13 inches tall). Narrow strap around right boot holds metal colored flares. 5. Chest Harness: Leather or leather like straps as shown (holster and pistol optional). 6. Gloves: Black gloves with a flared wrist, and black bracers. 7. Crotch Harness: Leather or leather like straps as shown. 8. Pouches: Two medium sized (approx 4 x 6) black leather pouches with flaps that close with a snap. OPTIONAL ITEM OPTION TO BE GENERAL VANDER: 1. Black shoulder armor on left side extends to hem of the left sleeve. 2. Accurate hair. 3. Cybernetic implant above left eye. COSTUME RESOURCES Rebel Commanders forum Standard reviewed by the Costume Standards Committee 15 August 2015 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

Read More
Ilum Officer (Star Wars: TOR)
Aug17

Ilum Officer (Star Wars: TOR)

  CHARACTER DESCRIPTION Star Wars: The Old Republic is a massively multiplayer online role-playing game (MMORPG) based in the Star Wars universe. Source Wookieepedia REQUIRED ITEMS 1. Shirt: Medium gray, short sleeved, pull over shirt with collar. Sleeves should be no longer than two inches above the elbow. Right sleeve has a three dimensional pocket with a flap that closes with a snap. This pocket should be gray, the same fabric as the shirt. Rank pins on collar. Long dark gray under sleeves with a patch near each wrist, and a metallic embellishment at the wrist, as shown. Under sleeves and pants should be the same shade of gray, preferably the same fabric. Each shoulder has a patch of a golden brown material as shown. 2. Trousers: Close fitting dark gray pants, no front or rear pockets.  Left side has a patch pocket, approx 4 inches wide with a flap with a snap closure. 3. Belt: Medium gray leather, 2.5 to 3 inches wide.  Large metal buckle, rectangular shaped.  There are six vertical metallic embellishments evenly spaced. 4. Boots: Medium gray leather or leather like spats over brown or black flat heeled boots. No visible zippers or buckles. Boots should end below the knee. (Approx 11-12 inches tall). Narrow strap around right boot holds three metal colored flares. 5. Chest Harness: Leather or leather like straps as shown (pistol optional). 6. Gloves: Medium to dark brown leather gloves, wrist length, with flared wrist. OPTIONAL ITEM OPTION TO BE SUPREME COMMANDER RANS: 1. Dark gray shoulder armor on left side extends to hem of the left sleeve. 2. Black hair and goatee. COSTUME RESOURCES Rebel Commanders forum Standard reviewed by the Costume Standards Committee 15 August 2015 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

Read More
Coruscant Officer (Star Wars: TOR)
Aug17

Coruscant Officer (Star Wars: TOR)

  CHARACTER DESCRIPTION Star Wars: The Old Republic is a massively multiplayer online role-playing game (MMORPG) based in the Star Wars universe. Source Wookieepedia     REQUIRED ITEMS 1. Shirt: Tan short sleeve pullover shirt with collar. Sleeves should end no longer than one inch above the elbow. Each sleeve has a band of darker tan material, approx. 1 – 1.5 inches wide. Shirt has a three dimensional pocket on the right sleeve, with a flap with a snap closure. The left sleeve has a patch of the same color fabric. Each shoulder has a patch of a golden brown material as shown. Tan undersleeves. Rank collar pins. 2. Trousers: Close fitting tan pants with a pocket on the side of each thigh.  Pocket is approx. 3-4 inches wide has a pointed bottom and a flap with a snap closure. No front or rear pockets. Pants should be the same shade of tan as the shirt, preferably the same fabric. 3. Belt: Tan leather, 2.5 to 3 inches wide.  Large metal buckle, rectangular shaped, with a leather edging. There are six vertical metallic embellishments evenly spaced. 4. Boots: Brown leather or leather like, flat heeled boots. No visible zippers or buckles. Boots should end just below the knee. (Approx 12 inches tall) Narrow strap around right boot holds three metal colored flares. 5. Chest Harness: Leather or leather like straps as shown here (holster and pistol optional). 6. Gloves: Medium to dark brown leather gloves, wrist length, with flared wrist. OPTIONAL ITEM 1. White hair pulled into bun at the upper back of head for General Garza.   COSTUME RESOURCES Rebel Commanders forum   Standard reviewed by the Costume Standards Committee 15 August 2015 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

Read More