Obi Wan Kenobi (Mandalorian Super Commando Armour)
Jan31

Obi Wan Kenobi (Mandalorian Super Commando Armour)

  CHARACTER DESCRIPTION Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter.  His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area.  It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life. Source Wookieepedia     REQUIRED ITEMS 1. Flightsuit: -Black or charcoal grey in color. -Has traditional Mandalorian style double sleeves. -No pockets should be visible 2. Vest: -Black leather heavy cloth-like like vest. -Shoulders should flare outward like wings. -“Jango Style” vest is preferred. -Bottom of vest should end just after the bottom of the chest / back armor, and not be tucked into the girth belt, to allow for some flightsuit to show. -Black Neckseal may or may not be attached to the vest. 3. Chest armor: -Consists of collar armor, left and right breast plates, a center diamond, and an abdominal plate. -Must be made of a solid material such as fiberglass, styrene or sintra. -Must have dimension and give the feeling of thickness and depth. -The collar, center diamond, left, and right chest pieces are red with light grey weathering. -The abdominal plate is painted light grey with red weathering. -The left breast plate must have two indented horizontal bars, painted to match the color scheme of the rest of the plate. -The center diamond plate between breast plates must have a raised vertical rectangle as shown in the visual reference. -All pieces must attach securely to the vest. 4. Shoulder Armor: -Must have dimension and give the feeling of thickness and depth. -Shoulder armor is red. -Shoulder armor should flare out off the shoulders to present a wider than normal silhouette. 5. Gauntlets: -Gauntlet color is charcoal grey. -Gauntlets taper towards the wrist. -Gauntlets have a seam on the inside of the arm with indents on either side of the seam as shown. -Gauntlets have a stepped detail on the top center as shown. -Left gauntlet has a Mandalorian compad attached on the top, near the wrist. 6. Gloves: -Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin. 7. Handplates: -Must have dimension and give the feeling of thickness and depth. -Symmetrical, angled tombstone shaped handplates. -Color is charcoal grey. 8. Backplate: -Must have dimension and give the feeling of thickness and depth. -Color is charcoal grey, with red...

Read More
Obi-Wan Kenobi (The Clone Wars season I)
Feb26

Obi-Wan Kenobi (The Clone Wars season I)

  CHARACTER DESCRIPTION Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter. His homeworld was Stewjon, from which Kenobi had vague, pleasant memories of playing with his brother, Owen, in a green, grassy area. It is recorded that Kenobi might have occasionally visited Owen and the rest of the Kenobi family later in his life.  (Source: Wookiepedia) REQUIRED ITEMS 1. Clone white animated-style armour (forearms, elbows, biceps with backs cut out, shoulders, handplates, shins, knees) Left shoulder has red Jedi symbol. Elbows must be attached to forearms.  Jedi white chest/shoulder armour with mock-neck collar All armour pieces must have the correct weathering / neck seal must go completely around the neck (No gaps allowed) All armour pieces must be made from a rigid material (No foamies allowed) 2. Tan sleeveless outer tunic, knee length 3. Single tabard in front extending down from the waist to knee level 4. Dark brown obi 5. Black undersuit 6. Black gloves 7. Dark Brown leather belt with smaller inner strap and silver buckle 8. 2 tall brown leather pouches 9. Revenge of the Sith Hero lightsaber hilt 10. Belt components should be arranged in the proper order 11. White clone trooper style shoes  12. Hair should be styles as seen in series. Costumer should have a beard. Wigs and prosthetics are allowed OPTIONAL REQUIREMENTS 1. Brown hooded cape 2. ‘Obi-Wan Kenobi’ knees attached to armour COSTUME RESOURCES 1. RL Jedi Tutorials 2. Crazy Old Wizards (credits to Defyitall for the Obi-Wan standards) PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

Read More
Barriss Offee (The Clone Wars)
Feb26

Barriss Offee (The Clone Wars)

Barriss Offee was a Mirialan Jedi Knight and General during the Clone Wars. A skilled Jedi Healer, Offee utilized her abilities at a Rimsoo on Drongar during the galactic conflict.

Read More
Generic Jedi General (The Clone Wars)
Feb26

Generic Jedi General (The Clone Wars)

  CHARACTER DESCRIPTION Jedi – A Jedi was a member of the Jedi Order, who studied, served and used the mystical energies of the Force; usually, the light side of the Force. The weapon of the Jedi was the lightsaber, a weapon with a blade made of pure energy. The Jedi fought for peace and justice in the Galactic Republic, usually against their mortal enemies, the Sith and Dark Jedi, who studied the dark side of the Force. Although the Order was almost destroyed five times, including once by the Sith Empire of Darth Revan, by the Sith Triumvirate under Darth Nihilus during the First Jedi Purge shortly after, 4,000 years after that, by the Great Jedi Purge of Darth Sidious, and a century afterwords by Darth Krayt’s Galactic Empire and it’s Third Jedi Purge, the order continued to live on, in part due to the Skywalker family who time and time again played important parts in the history of the Jedi. REQUIRED ITEMS 1. Permitted colours- Earth tones: Only browns and natural colours are acceptable. Shades of blue, green, orange and red are not permitted  2. Soft Costume  Inner tunic or Dickie. Mandarian-style acceptable.  Outer Tunic, Well-fitted, extending to the costumer’s knee area.  Tabards, extends past the obi/sash,.  Obi/sash. 3. Belt, wide leather main belt with a covertec (or similar), thinner secondary belt on top of the main belt, and a buckle. Thinner secondary belt cannot be loose or “sag”. No black belts accepted  4.  Brown Boots, (leather, seude, pleather) must rise at least to the calf, but not above the knee. No rubber boots, black boots, or visible laces permitted 5. Pants or skirt 6. No visible t-shirts 7. Lightsaber (No toy sabers) 8.  Jedi Armour – Required. This is the only permitted combination Style 1) Animated Clone-styled armour. White only. Hand plates & Forearms, black gloves Style 2) Heavy leather gauntlets 9. Shoulder/chest and bicep armour reserved for face characters only (Obi-Wan, Anakin) FORMAL REQUIREMENTS – YOU MUST HAVE AT LEAST TWO 1. At least one set of four food capsules 2. At least one of the following pouches: small brown ribbed belt pouch, tall brown ribbed belt pouch, or wide brown ribbed belt pouch 3. Comlink on armoured forearm OPTIONAL REQUIREMENTS Decals (limited to this selection) 1. Republic logo 2. Jedi Order symbol PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please...

Read More
Luminara Unduli (The Clone Wars)
Feb26

Luminara Unduli (The Clone Wars)

  CHARACTER DESCRIPTION Luminara Unduli – was a female Mirialan who served as a Jedi Master and Jedi General in the fading years of the Galactic Republic. She was a valued adviser to the Jedi High Council, the Supreme Chancellor, and the Galactic Senate. During the Clone Wars, she fought with her last Padawan, Barriss Offee, and she was a common and formidable presence at points of crisis, on worlds such as Ilum, Nadiem, and Geonosis. She was killed during the Battle of Kashyyyk when Contingency Order 66 was enacted. REQUIRED ITEMS 1. Black one-piece bodysuit with turtleneck, long sleeves, and textured front -OR- Black fitted pants/leggings and tight black longsleeved shirt with turtleneck collar and textured front 2. Brown open-front overshirt attached at princess seam of undershirt, with split bell-shaped sleeves just past elbow-length 3. Floor-length Open front brown skirt 4.Decorative clasp at neck, metal-coloured with 5 ‘danglies‘ 5. 2 brown belts with gold round medallions, one worn straight, one worn slanted 6. Brown Egyptian-styled headdress with brown/black trim 7. Decorative wrist bracers in browns 8. Decorative waist tabard in browns 9. Tall black boots, No-low heel 10. Olive or yellowish skintone, with black/blue diamond chin tattoos and dark lower lip 11. Painted Black Fingernails 12. Green-bladed Lightsaber  OPTIONAL ITEMS 1. Luminara’s Hero Lightsaber hilt 2. Bright Blue Contacts PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

Read More
Ahsoka Tano
Feb26

Ahsoka Tano

  CHARACTER DESCRIPTION Ahsoka Tano, nicknamed Snips by her master, was a Togruta female from the planet Shili who trained as a Jedi apprentice during the Clone Wars, the conflict between the Galactic Republic and the Confederacy of Independent Systems. Tano was assigned to Jedi Knight Anakin Skywalker by Jedi Grand Master Yoda, and she demonstrated an eagerness to prove herself worthy to be his apprentice. Tano was involved in the defeat of the Separatist army on the planet Christophsis and was important to Republic efforts during the Battle of Teth. Along with Skywalker, Tano was instrumental in acquiring the Republic’s safe passage through Hutt Space, due to her part in rescuing the son of Jabba the Hutt, which ensured an alliance between the Republic and the Hutt clans.  (Source: Wookiepedia) REQUIRED ITEMS 1. Maroon or dark red Suede (or Micro-suede) tube top and mini skirt 2. Maroon or Dark Red distressed leather gauntlets with 3 buckles and dark red suede (or micro-suede) elbow covering 3. Maroon or dark red distressed leather (or leather like) gloves (separate from gauntlets) 4. Tights: whitish/grey in colour 5. Dark Red distressed leather (leather like) square-toed boots with dark red distressed leather (leather like) spats with 5 buckles that match gauntlet buckles 6. Blue and white striped togrutan montrals/head-tails with beads,preferably skin-like appearance as opposed to fabric finish  7. Two food capsules, 1 silvery blue, 1 gold 8. One boxy pouch 9. Dark Red distressed belt with gold trapezoidal buckle with purple single tabbard coming down with diamond design in darker purple on it 10. Green lightsaber (non-toy lightsaber) 11. Upper body and face painted burnt orange with white designs on face, no splotchy make-up OPTIONAL ITEMS 1. 7 silver triangular pieces of jewellery on the head 2. Luke ANH style poncho 3. Luke ROTJ style cloak COSTUME RESOURCES Angels of Iego PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

Read More