Clone Trooper, Episode II Soldier (Phase I)
Feb25

Clone Trooper, Episode II Soldier (Phase I)

CHARACTER DESCRIPTION The clone troopers of the Grand Army of the Republic are soldiers in the Star Wars universe, cloned from Jango Fett, a Mandalorian bounty hunter. They first appeared in Star Wars Episode II: Attack of the Clones, and returned in Star Wars Episode III: Revenge of the Sith where they were played primarily by Temuera Morrison. In the two Clone Wars animated TV shows, they are voiced by Andre Sogliuzzo and Dee Bradley Baker. Clone troopers comprised the bulk of the Army of the Republic during the Clone Wars. They are depicted as the main part of the armed forces of the Galactic Republic in its final years, becoming one of the largest armies ever assembled, only surpassed by the Separatist Droid Army. Nearing the end of the clone wars, they were ordered to slay the Jedi. This famous Jedi purge was known as ‘Order 66’. After the Clone Wars, they served as the nucleus for the armed forces of the Galactic Empire, eventually becoming the Imperial Stormtroopers. Source: Wikipedia REQUIRED ITEMS 1. Black Undersuit One or two piece black undersuit. Commonly used components include sports comression wear, warm-up suits, dance unitards, or diveskins. Undersuit must be smooth in appearance or with vertical ribbing with no labels or logos visible once the armor is on. 2. Black Gloves Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin. 3. Neck Seal Neck seal to be black in color with vertical ribbing or being smooth in appearance. No logos or labels are to be visible. If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable. 4. Helmet Episode 2 style Clone Helmet – Fanmade bucket. Some “name brand” helmets may be unacceptable. Visor – Mirrored/Chrome or Black Visor Helmet Fin on dome Rear fin needs a brake light cover installed. 6 Primer Grey Vents on each side of helmet cheeks Helmet frown is charcoal grey in color. Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown. Primer grey stripe around back of dome. Ear holes may be painted light grey or remain white. 5. Armor  Chest – Two detail slots on right breast. Chest and back plate should match together at the sides with no gap, just a seam line. Back – Chest and back plate should match together at the sides with no gap, just a seam line. Shoulders Shoulder Straps – Correct shape with ridges. Upper Arms – Front/back pieces are seamless....

Read More
Clone Pilots (Episode III)
Feb25

Clone Pilots (Episode III)

CHARACTER DESCRIPTION Clone trooper pilots were special clone troopers bred in the Kamino cloning centers for the purpose of piloting craft of the Grand Army of the Republic and the early Galactic Empire. They first appeared at the Battle of Geonosis,where they flew LAAT/i and LAAT/c gunships. Pilots also operated CR20 and CR25 troop carriers. In addition, they flew starfighters such as the V-19 Torrent, ARC-170, and Alpha-3 Nimbus-class V-wing. The pilots who flew capital ships wore a special type of armor instead of the regular one, seen in the First Battle of Mon Calamari, during the Clone Wars. Pilots also knew how to operate all military land vehicles such as the AT-TEs. Source: Wookiepedia REQUIRED ITEMS 1. Grey flightsuit with Old Republic patches   2. White hard chest armour front and back connected with black nylon webbing, and 2 shoulder plates   3. Chest box   4. Grey hoses from chest box to helmet   5. White ARC-170 helmet   6. White boots   7. White gauntlet type gloves   8. White belt  COSTUME RESOURCES CloneTroopers.Net PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

Read More
Clone Pilots (Episode II)
Feb25

Clone Pilots (Episode II)

CHARACTER DESCRIPTION Clone trooper pilots were special clone troopers bred in the Kamino cloning centers for the purpose of piloting craft of the Grand Army of the Republic and the early Galactic Empire. They first appeared at the Battle of Geonosis,where they flew LAAT/i and LAAT/c gunships. Pilots also operated CR20 and CR25 troop carriers. In addition, they flew starfighters such as the V-19 Torrent, ARC-170, and Alpha-3 Nimbus-class V-wing. The pilots who flew capital ships wore a special type of armor instead of the regular one, seen in the First Battle of Mon Calamari, during the Clone Wars. Pilots also knew how to operate all military land vehicles such as the AT-TEs. Source: Wookiepedia REQUIRED ITEMS 1. Complete clone armour 2. Modified clone helmet with chest box attached to helmet by 2 hoses 3. Yellow detail paint 4. Black undersuit with high collar or neck seal COSTUME RESOURCES CloneTroopers.Net PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

Read More
Clone Officer
Feb25

Clone Officer

CHARACTER DESCRIPTION Clone naval officers also known as clone navigators were clone troopers specifically trained in technical and tactical aspects of naval command. Kaminoan scientists speculated that clones’ aptitude for space combat came from Jango Fett’s understanding of dogfight tactics, but even amongst his clones some had proved themselves capable of understanding and executing naval strategy to a greater degree than their brothers. Those clones received special naval training and many of them eventually became officers in the Republic Navy, although most of them were lower-tier commanders and aides to superior non-clone officers. Some of those officers believed that despite their training the clones were not suited for a role of an officer, which sometimes led to rising tensions aboard Galactic Republic ships. Although Grand Army of the Republic soldiers such as Rom Mohc had a high opinion of clones and relished working with them, others decided to avoid following Mohc’s kindness. As a result, these naval officers had tense relationships with officers. Source: Wookiepedia REQUIRED ITEMS Gray long sleeve jacket (needs to extend below the waist down to hips, and be made from a good quality suiting material.) Epaulets on both shoulders Mandarin-style Collar with closure on the right side “S” seam on front of jacket (extending from bottom on L side; rising to mid chest and curving 90 degrees to the R; across chest then curving 90 degrees to vertical; then rising to the L shoulder epaulet) 2 stripes on jacket cuff Black belt w/ rectangle silver buckle. Rank insignia on L breast Pants in matching fabric Black boots rising to just below the knee Short clone hair style only (long hair will not be accepted) RECOMMENDED Dark piping to outline the “S” seam on the jacket front Split skirt on back of jacket  Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

Read More
Clone Commander, Deviss
Feb25

Clone Commander, Deviss

CHARACTER DESCRIPTION CT-65/91-6210, also known as “Deviss,” was a clone trooper captain who led K Company, a unit within Clone Commander Bly’s 327th Star Corps. In 22 BBY, Deviss served in the the first battle of the Clone Wars on the Outer Rim planet Geonosis. During the battle, Deviss risked his life to protect two injured soldiers from Confederate spider droids and received a medal after being rescued from behind enemy lines by Republic troops. He went on to fight in the Battle of Altyr V, after which he was promoted to commander for his actions. He also participated in a battle on Cato Neimoidia. In 19 BBY, Deviss was dispatched to support Jedi General Nem Bees on Orto. During a battle on the planet, the Commander received Order 66—which called for all clone troopers to execute their Jedi officers—and personally shot down Bees on the front lines. Source: Wookiepedia REQUIRED ITEMS NOTE: This clone wears Phase II (Episode III) armor with additional paint and accessories. Only those additional items are listed here. 1. Helmet Binoc set mounted to the helmet Red stripe down the center, starting in the rear above the grey band and tapering slightly toward the chin (mohawk is left white) 2. Armor Chest – Red stripe down the center Shoulders – Red stripe down the center Upper Arms – Red stripe on the outside of the bicep, located slightly more toward the front Forearms – Red stripe on upper/outside, Shape of compad is painted on left forearm Handplates – Red stripes down center Knees – Red stripes down center 3. Belt 2 red stripes on the center-most raised rectangular details 4. Boots 2 Red stripes. One on the boot strap and one just below the strap 5. Pauldron Episode III style pauldron One large shoulder plate approximately the width of the helmet and painted red One black smaller shoulder plate approximately the same width as the distance from the neck and outer line of the armor at the shoulder Mantle (or base) should be black 6. Ammo Boxes 3 ammo boxes are attached to a grey strap that is attached to the pauldron (on the opposite side of the large shoulder plate) and runs down to the belt. Outer area of boxes is white. Inner portion is raw sienna with a black square located towards the top. 2 smaller ammo boxes are attached to the bicep (opposite the large shoulder plate) on a grey strap. One box is located on the front of the bicep and the other is located on the outside. Outer area of boxes is white. Inner portion is raw sienna. 7. Kama Taupe and rectangular shaped with 4...

Read More
Clone Commander, Bly
Feb25

Clone Commander, Bly

CHARACTER DESCRIPTION CC-5052 was a clone marshal commander who served both the Galactic Republic and the Galactic Empire that followed. A clone of Jango Fett, CC-5052 was bred on Kamino, where he was trained as an Advanced Recon Commando by Alpha-17. Alpha-17 also gave CC-5052 the name “Bly,” which the clone commander himself adopted. Assigned to the 327th Star Corps, Bly worked with Jedi General Aayla Secura throughout the Clone Wars. Serving in campaigns on planets such as Quell, Maridun, Alzoc III, Florrum, and New Holstice, Bly worked with Secura to personally extract a valuable Scientific Instrument Package from Honoghr. During the mission, Bly encountered renegade Jedi Quinlan Vos, whom he deeply mistrusted. Shortly after the Honoghr mission, Bly and Secura served alongside the reformed Vos in the Siege of Saleucami. Source: Wookiepedia REQUIRED ITEMS NOTE: This clone wears Phase II (Episode III) armor with additional paint and accessories. Only those additional items are listed here. 1. Helmet Binoc set mounted to the helmet Yellow mohawk and lower portion of helmet Sandy brown stripe down the center, starting in the rear above the grey band and tapering slightly toward the chin 2. Armor  Chest – Sandy brown stripe down the center  Shoulders – Sandy brown stripe down the center  Upper Arms – Sandy brown stripe on the outside of the bicep, located slightly more toward the front  Forearms – Sandy brown stripe on upper/outside, shape of compad is left white on left forearm  Handplates – Sandy brown stripe down center  Thighs – Yellow with sandy brown stripe down front/center  Knees – Sandy brown stripes down center 3. Belt Large/front boxes and belt in between are painted yellow 4. Boots 2 Yellow stripes. One on the boot strap and one just below the strap 5. Pauldron Episode III style pauldron One large shoulder plate approximately the width of the helmet and painted in a brown/sienna color One black smaller shoulder plate approximately the same width as the distance from the neck and outer line of the armor at the shoulder Mantle (or base) should be black 6. Ammo Boxes 3 ammo boxes are attached to a grey strap that is attached to the pauldron (on the opposite side of the large shoulder plate) and runs down to the belt. Outer area of boxes is white. Inner portion is raw sienna with a black square located towards the top. 2 smaller ammo boxes are attached to the bicep (opposite the large shoulder plate) on a grey strap. One box is located on the front of the bicep and the other is located on the outside. Outer area of boxes is white. Inner portion is raw sienna. 7....

Read More