ARC Null Class, Clone Trooper (realistic)
Feb25

ARC Null Class, Clone Trooper (realistic)

CHARACTER DESCRIPTION Numbering only six, the Null-class Advanced Recon Commandos were the first clones of Jango Fett created by the Kaminoan cloners, and the prototypes for the Grand Army of the Republic. They were deemed a failure by the Kaminoans and were not put into mass-production. However, Mandalorian mercenary Kal Skirata saved them from termination by the Kaminoans and later adopted all of them. All of the Nulls were named after Mandalorian warriors. (Source: Wookiepedia) REQUIRED ITEMS NOTE: This clone wears Phase I (Episode II) armor with additional paint and accessories. Only those additional items are listed here. 1. Helmet Colored command stripe around visor and down center of dome (Yellow=Commander / Red=Captain / Blue=Lieutenant / Moss Green=Sergeant) Fett-style Range Finder on right side of helmet. Mounted in the ear, not to the outside. Stalk should be metal colored. Range finder should be black. 2. Armor  Chest Four command dots lined on the left breast. (Red=Captain… Blue=Lieutenant… Moss Green=Sergeant). Dots are approximately .5 to .75 inches in diameter Shoulders Rank stripe down the center (2) Upper Arms Rank stripe on the outside of the bicep, located slightly more toward the front (2) Elbows Rank stripe on outer half of elbow plate (2) Forearms Raised left forearm includes metallic dart, 5 square yellow buttons on outer area and two buttons on inner area of forearm Rank stripe on upper/outside (2) Handplates Entire plate painted with rank color  3. Pauldron Episode III style One large shoulder plate approximately the width of the helmet and painted with matching rank color  One black smaller shoulder plate approximately the same width as the distance from the neck and outer line of the armor at the shoulder  Mantle (or base) should be black 4. Kama Charcoal grey and rectangular shaped with 4 inch “V” cut in bottom/center Matching rank color trim, 1 inch wide Optional 1. Pistols and Holsters One holster on each hip, hanging from the belt ARC or DC-17 pistols acceptable 2. Large Boba Fett-style belt pouches 2 pouches or boxes hanging from opposite sides of belt at hips Pouches/boxes may be soft or rigid 3. Right forearm 4 square yellow buttons Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

Read More
ARC, Standard Class, Clone Trooper
Feb25

ARC, Standard Class, Clone Trooper

CHARACTER DESCRIPTION Advanced Recon Commandos, also known as Advanced Recon Clone troopers or simply ARC troopers—were an elite variant of clone trooper in the Grand Army of the Republic during the Clone Wars. Although less numerous than the other clones, they were also among the most skilled soldiers in the galaxy.   (Source: Wookiepedia) REQUIRED ITEMS NOTE: This clone wears Phase I (Episode II) armor with additional paint and accessories. Only those additional items are listed here. 1. Helmet Colored command stripe around visor and down center of dome (Yellow=Commander / Red=Captain / Blue=Lieutenant / Moss Green=Sergeant) Fett-style Range Finder on right side of helmet. Mounted in the ear, not to the outside. Stalk should be metal colored. Range finder should be black. 2. Armor  Chest Shoulders Rank stripe down the center (2) Upper Arms Rank stripe on the outside of the bicep, located slightly more toward the front (2) Elbows Rank stripe on outer half of elbow plate (2) Forearms Raised left forearm includes metallic dart, 5 square yellow buttons on outer area and two buttons on inner area of forearm Rank stripe on upper/outside (2) Handplates Entire plate painted with rank color  3. Pauldron ARC style pauldron Black with 4 panels over left shoulder painted to match rank color 4. Kama Charcoal grey Front/bottom corners should extend to bottom of knee plates 2 triangular detail pieces at front/top Matching rank color trim, 1 inch wide Optional 1. Pistols and Holsters (Red ARC only) One holster on each hip, hanging from the belt Option A – 2 DC-17 Pistols Option B – 2 ARC Trooper pistols 2. Pauldron Option (Red ARC only) 2 or 3 black leather or leather-like ammo pouches hang from pauldron on right breast 3. Large Boba Fett-style belt pouches (Blue ARC only) 2 pouches or boxes hanging from opposite sides of belt at hips Pouches/boxes may be soft or rigid 4. Kama Option 4 inch “V” cut in bottom/center Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

Read More
Clone Trooper Soldier, The Clone Wars (animated style)
Feb25

Clone Trooper Soldier, The Clone Wars (animated style)

CHARACTER DESCRIPTION Clone troopers were an army of identical, genetically-modified clones, created to serve in the Grand Army of the Republic during the full-scale intergalactic conflict that came to be known as the Clone Wars. Grown at an accelerated rate and raised in the laboratories and facilities of Kamino, the clone troopers were trained throughout the first ten years of their lives to become one of the most efficient military forces in galactic history. Bred for the sole purpose of combat, the clones were indoctrinated with unwavering obedience to the Galactic Republic and—more specifically—their Commander-in-Chief, the Supreme Chancellor. For roughly three years, the clone troopers fought to defend Republic sovereignty against the Separatist rebellion. Throughout the conflict, the members of the Jedi Order served as commanders and generals of the Grand Army and, thus, they served alongside their clone soldiers on many occasions. But the covert Sith plot to seize control of the galaxy, masterminded by the Sith Lord Darth Sidious, effectively caused the clones to betray and destroy the Republic that they were sworn to protect with their lives. Sidious, in his public guise as Chancellor Palpatine, issued Order 66 to the clone troopers on the eve of the Clone Wars’ end. (Source: Star Wars Wiki) REQUIRED ITEMS Black Undersuit One or two piece black undersuit. Commonly used components include sports compression wear, warm-up suits, dance unitards, or diveskins. Undersuit must be smooth in appearance or with vertical ribbing with no labels or logos visible once the armor is on. Black Gloves Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin. Neck Seal Neck seal to be black in color with vertical ribbing or being smooth in appearance. No logos or labels are to be visible. If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable. Helmet The Clone Wars animated style clone helmet – Fanmade bucket. Some “name brand” helmets may be unacceptable. Visor – Black visor covers entire “T” shape and frown Helmet Fin on dome 4 black vents on each side of helmet Primer grey stripe around back of dome. NOTE: Episode II style helmets are not acceptable Armor Chest – Chest and back plate should match together at the sides with no gap, just a seam line. Back – Chest and back plate should match together at the sides with no gap, just a seam line. Shoulders Shoulder Straps – Correct shape with ridges. Upper Arms – Front/back pieces are seamless. Forearms- Inner seam/clamshell design allowed. Hand...

Read More
Clone Trooper, 327th Star Corps
Feb25

Clone Trooper, 327th Star Corps

CHARACTER DESCRIPTION The troops of the 327th Star Corps were distinguished by striped yellow markings running the length of their armor and, as a result of Clone Marshal Commander Bly’s ARC training, his troopers were allowed to don kamas and command pauldrons. One unit within the 327th was K Company. (Source: Wookiepedia) REQUIRED ITEMS NOTE: This clone wears Phase II (Episode III) armor with additional paint and accessories. Only those additional items are listed here. Helmet Marigold color stripe down the center, starting in the rear above the grey band and tapering slightly toward the chin.  Armor Chest – Marigold stripe down the center Shoulders – Marigold stripe down the center Upper Arms – Marigold stripe on the outside of the bicep, located slightly more toward the front Forearms – Marigold stripe on upper/outside Handplates – Marigold stripes down center Knees – Marigold stripes down center Belt 2 Marigold stripes on the center-most raised rectangular details Boots 2 Marigold stripes. One on the boot strap and one just below the strap Pauldron Episode III style pauldron One large shoulder plate approximately the width of the helmet and painted in a brown/sienna color One black smaller shoulder plate approximately the same width as the distance from the neck and outer line of the armor at the shoulder Mantle (or base) should be black Note: The 327th Star Corps clone may wear the pauldron to the left or right. Ammo Boxes 3 ammo boxes are attached to a dark grey strap that is attached to the pauldron (on the opposite side of the large shoulder plate) and runs down to the belt. Outer area of boxes is white. Inner portion is raw sienna with a black square located towards the top. 2 smaller ammo boxes are attached to the bicep (opposite the large shoulder plate) on a light grey strap. One box is located on the front of the bicep and the other is located on the outside. Outer area of boxes is white. Inner portion is raw sienna. Kama Brown and rectangular shaped with 4 inch “V” cut in bottom/center Straps are attached to kama buckle with clips and are stitched to the inside of the kama Kama buckle Buckle is located under the front/center of the belt. Kama straps are attached to the buckle with clips Pistols and Holsters One holster on each hip, hanging from the belt 2 DC-17 Pistols (see photo reference) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

Read More
Clone Trooper, Galactic Marine
Feb25

Clone Trooper, Galactic Marine

CHARACTER DESCRIPTION The Galactic Marines, originally known as the 21st Nova Corps of the 4th Sector Army, was an elite unit that was created as the Grand Army of the Republic diversified during the Clone Wars. Following the formation of the Galactic Empire in 19 BBY, they became known as Imperial Galactic Marines. Source: Wookiepedia REQUIRED ITEMS 1. Undersuit The trousers are a grey and have a cod insert on the front. One rectangular cargo pocket with flap centered on the front of each thigh. Upper portion of undersuit may be black or dark grey  2. Black Gloves Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin.  3. Helmet GM Clone Style Helmet – Fanmade helmet Black or Green Visor -Welding Shield above grade 5. Lenses may be flat or bubble, either is acceptable White Cowl  4. Armor Chest – Specific shape to the GM to include 3 greeblies on front/lower area of chest plate Back – Specific shape/size to match the GM chest or regular movie style clone armor Shoulders – Specific shape to the GM, each shoulder is different shape Upper Arms – Seamless regular clone armor Forearms – Seamless regular clone armor Elbows – 2 detail slots on the outside area of both elbow pieces regular clone armor Elbow – Straps regular clone elbow straps, white in color Handplates – Regular clone armor Knees – Specific to the GM Knee Straps – Regular clone knee straps, white in color Lower shin/calf – Specific to a GM to include 2 sets of white straps with clip greeblies each Boot Armor Plates Note: All armor should be weathered. Black wash is an example of an acceptable weathering technique. Exposed rivets are not acceptable. 5. Belt Belt has 2 large and 2 small pouches accompanied by 2 buckle-looking greeblies on the front and a kama buckle in the front/center Top of belt should be mounted just below the chest/back plates with little or no gap visible  6. Boots Must be white leather or leather-like with the sole pattern to match as closely as possible to the movie costume. Most identifiable features include a high arch pattern on the inside of the sole, four profile “swoops” between the sole and leather. Snaps on both side of heel upper to secure the boot armor is suggested.  7. Kama Color should closely match that of armor Length starts just under belt down to top of shin armor / Width is larger at the top than the bottom 4″ split at back/bottom/center 2 white straps connect to belt via kama...

Read More
Clone Trooper, Episode III Soldier (Phase II)
Feb25

Clone Trooper, Episode III Soldier (Phase II)

CHARACTER DESCRIPTION The clone troopers of the Grand Army of the Republic are soldiers in the Star Wars universe, cloned from Jango Fett, a Mandalorian bounty hunter. They first appeared in Star Wars Episode II: Attack of the Clones, and returned in Star Wars Episode III: Revenge of the Sith where they were played primarily by Temuera Morrison. In the two Clone Wars animated TV shows, they are voiced by Andre Sogliuzzo and Dee Bradley Baker. Clone troopers comprised the bulk of the Army of the Republic during the Clone Wars. They are depicted as the main part of the armed forces of the Galactic Republic in its final years, becoming one of the largest armies ever assembled, only surpassed by the Separatist Droid Army. Nearing the end of the clone wars, they were ordered to slay the Jedi. This famous Jedi purge was known as ‘Order 66’. After the Clone Wars, they served as the nucleus for the armed forces of the Galactic Empire, eventually becoming the Imperial Stormtroopers. Source: Wikipedia REQUIRED ITEMS 1. Black Undersuit One or two piece black undersuit. Commonly used components include sports comression wear, warm-up suits, dance unitards, or diveskins. Undersuit must be smooth in appearance or with vertical ribbing with no labels or logos visible once the armor is on. 2. Black Gloves Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin. 3. Neck Seal Neck seal to be black in color with vertical ribbing or being smooth in appearance. No logos or labels are to be visible. If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable. 4. Helmet Episode III (Phase II) style Clone Helmet – Fanmade helmet. Some “name brand” helmets may be unacceptable. Visor – mirrored/chrome or black visor 9 blue or black vent stripes on each side of cheek tubes Helmet frown is charcoal grey in color. Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown. Grey stripe around back of dome. 5. Armor  Chest – Two detail slots on right breast. Chest and back plate should match together at the sides with no gap, just a seam line. Back – Chest and back plate should match together at the sides with no gap, just a seam line. Shoulders Shoulder Straps – Correct shape with ridges. Upper Arms – Front/back pieces are seamless. Forearms – Front/back pieces are seamless. Elbows – Two detail slots on the outside area of both elbow pieces. Elbow Straps Handplates AB plate – Four...

Read More