Finn
Nov16

Finn

  CHARACTER DESCRIPTION Finn was a human male who served as a First Order stormtrooper, designation FN-2187 and known to his fellow soldiers as Eight-Seven. He was considered one of the group’s best stormtroopers before he deserted to join the Resistance in their struggle against the First Order. (Source: Wookieepedia) REQUIRED ITEMS 1. Jacket: Heavily weathered Military khaki/dark carmel colored leather or leatherlike jacket with details as follows: a. Pleated section that goes from collar to bottom of sleeve approx 1/4 of the sleeve width, box pleats are about 1/4″ wide. Front edge of pleated section aligns with shoulder seam. There is a topstitched section same width as pleated section that runs length of sleeve on the front side of sleeve with back edge the start of the pleated section. b. Back of sleeve has stitched rectangle covering the elbow area, same fabric as jacket. c. Barn Red half yoke on right side of jacket front made of leather or leatherlike material, same color stripe on left side made of webbing material. Yoke is divided into 7 equal sections made by vertical stitched lines with thread that matches color of the jacket. d. Back yoke of jacket is divided into 14 equal sections made by vertical stitched lines. e. 3 web material loops on bottom left pocket, and two on cuffs of sleeves to hold leather strap in place. f. Leather straps on jacket cuffs have rectangle buckles g. Jacket has a stitched belt at back waist same material and color as jacket. Belt is loose in front and ends are sewn into front bottom pockets. h. Two top pockets. Pocket on left has gray/black weathered bronze colored rectangle greeblie. Bottom pockets have slanted top and circle opening in pocket center of left pocket. Top of left pocket has a double web strap that hangs loosely and is stitched to top sides of pocket. i. There is a pleated section that covers the left front of the jacket with a gray/black weathered bronze colored clip buckle about halfway down. j. Jacket length is below the hips and above the top pocket on the pants leg 2. Shirt: Athletic styled black long sleeve shirt, round neckline. Shirt is worn untucked and hem is just below waistline but above hips. 3. Pants: Black denim cargo pants with flat pockets on front thighs. No visible buttons or zippers. Pant legs are tapered and close fitting and end at top of heel of boot. Pants are weathered with a light colored dust on front legs. 4. Boots: First order white Stormtrooper boots or high top dirty white boots with five sections on front top....

Read More
Rey-Jakku-scavenger
Jul08

Rey-Jakku-scavenger

 

CHARACTER DESCRIPTION

Rey was a human female scavenger who discovered her latent Force-sensitivity while on a quest to find the legendary Jedi Master Luke Skywalker and bring a new hope to a galaxy on the brink of war.

Source Wookieepedia

Read More
Malakili (Rancor Keeper)
May07

Malakili (Rancor Keeper)

  CHARACTER DESCRIPTION A human male, Malakili was born on Corellia, a planet of the Core Worldsbest known for its pirates, its fast starships, and skilled merchants.  Since his most tender childhood, the young Malakili was fascinated by wild animals, and he wished he could dedicate his life to taking care of them. Source Wookieepedia   REQUIRED ITEMS 1. Hood: a. The hood is made of a dark brown leather or leather-like material, and weathered to look black in places. b. The hood is approximately one square yard, cut to a similar shape as references. c. There is a split / seam on right side of head, used to shape to head. d. There are two long, loose laces hang down from seam. The hood has the appearance of being “stitched” together by hand with black lacing. e. The hood’s edges have a rough appearance. f. There is patchwork of lighter shade leathers on top of head at brow and down left side of head. g. Attached to the hood is 3/4″ to 1″ wide black “choker” around neck. The choker extends up behind the ears and attaches to inside of hood to keep hood in place. h. The hood appears dirty, sweat-stained and greasy. 2. Arm Bands: a. The armbands are 2-1/2″ wide heavy leather or leather-like material straps. They are dark brown in color and appear to be sweat-stained. b. The bands are worn on the biceps (just below the armpit) and wrap completely around the arm with no gaps. c. The edge of straps appear to be worn (either rounded or beveled). d. There is no visible closure. Any overlap used for closure faces to the back, under the arm. e. The armbands have three bronze-looking domes, approximately 2″ on diameter at the base. The domes are not perfect cups, but rather appear to be hand-crafted. Each dome has a “weld” detail around its base, approximately 1/8″ thick. The domes are equally spaced around the strap, on “points” of four, with the fourth space empty under the arm. f. Between each dome is a pair of silver studs. There are eight total. The center of studs are 1/2″ from the edge of the strap. The studs are a half-dome shape and silver, but are dirty and tarnished till almost black. 3. Vambraces/Forearm Guards: a. The arm guards are made from a heavy leather or leather-like material. They are dark brown in color. They appear sweat-stained. b. The center area of forearm has a lighter brown area in the center. c. The armgaurds are extended down to cover half if the back of the hand.The guards do not...

Read More
Jar Jar Binks (Senatorial Robes)
Apr07

Jar Jar Binks (Senatorial Robes)

CHARACTER DESCRIPTION

Jar Jar Binks was the first Gungan to represent his people in the Galactic Senate, first serving as a Junior Representative along with Senator Padmé Amidala, and then, after her death, serving as full Senator himself.

Read More
Mara Jade (as Arica- Blue dancing dress)
Mar24

Mara Jade (as Arica- Blue dancing dress)

  CHARACTER DESCRIPTION Arica was the alias used by Mara Jade when she infiltrated Jabba’s Palace in 4 ABY.  Disguised as a dancer, her goal was to get close enough to Luke Skywalker to kill him, as Palpatine had ordered her to. Source Wookieepedia   REQUIRED ITEMS 1. Dress: a. Sleeveless top made of black fishnet material. b. The top has a blue fabric applique sewed onto the chest.  The applique resembles a pair of “wings” with five finger shapes extending from each side of the applique.  In the center of the applique, there is a black stitched circular design with a line going down through the center.  There are also two black stitched triangular designs on the top of each wing. c. Two skirt panels (made of the same blue fabric as the chest applique) that are ankle length.  The skirt panels are front and back, but still connected to each other on the sides.  The pieces of the skirt connected at the sides have decorative belt loops (one at each side. A second belt loop on each side is optional).  The skirt panels must be of a fabric that drapes and flows nicely. 2. Cape: a. The cape is a wide rectangular cape that can be made of the same fabric as the skirt and chest applique, or it may be sheer. b. Two thin, black or silver elastic bands hold the cape to the costumer’s upper arm (one band per arm) and two silver bracelets connect the cape to the costumer’s wrists (one bracelet per wrist). 3. Leggings/stockings: a. The leggings/stockings are black in color. b. They should begin at mid-thigh length and reach the ankles 4. Circlet: a. The circlet is thin and silver. b. Circlet should encircle the forehead. c. The circlet has decorative gems located on each temple. 5. Hair: a. The hair is slightly wavy. b. The hair may reach from the shoulders to mid-back in length.   OPTIONAL ITEMS 1.  Black or silver sandals.  These are recommended (but not required) while trooping to protect the costumer’s feet 2.  A necklace that is just above the neckline of the top and has decorative triangular accents attached to it. 3. Garter belts at the top of each legging/stocking.  The garter belts are black and have decorative silver, oval-shaped designs spaced among the belt.     COSTUME RESOURCES Sewsewing website     Standard reviewed by the Costume Standards Committee 23 March 2015   PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to...

Read More
Hera Syndulla
Feb15

Hera Syndulla

  CHARACTER DESCRIPTION Hera Syndulla was a Twi’lek female rebel who lived during the reign of the Galactic Empire. A capable pilot, Syndulla was the owner of the VCX-100 light freighter Ghost.  She kept a secret blaster in her boot and was close with Kanan Jarrus, whom she convinced to become a rebel. Source Wookieepedia   REQUIRED ITEMS 1.  Lekku: Accurate light green colour Lekku with detailing visible on the exposed parts of the Lekku. 2. Body Paint: Light green coloured body paint which should match the Lekku colour. 3. Headpiece : Screen-accurate off-white pilot’s headpiece. 4. Goggles: Top piece should consist of a silver frame with tinted lenses on a brown leather or leather like base, these should be either circular or slightly bowed towards the outside of the head.  The goggles should be attached to brown and silver earpieces by silver metal / metallic looking arms, and secured by a brown leather or leather like chinstrap.  The ear pieces should have the detail line on the outer dome. 5. Shirt: Off-white body and sleeves that puff around the lower arm. The shirt collar must have the accurate strap detail.  (A dickie is also acceptable in place of a separate shirt).  6.Vest and Shoulder Pads: Accurate, matching brown leather or leather like material vest and shoulder pads, which should be close in colour to that of the brown parts of the goggles.  Detail lines should be present on the shoulder and chest piece.  Vest should be fitted. 7. Gloves: Large flared dark brown leather or leather-like gauntlet style gloves with wrist strap.  Colour should be clearly darker than the vest and shoulder pads.  Gloves should have 2 detail snaps/rivets present on the outer edge of each side wrist strap. 8. Pants: Gold/light orange flight suit pants with five belt loops.  Pants should end above the waist in the back and rise to the centre of the leather vest in front, where they should appear to be held up by a button or snap, and must also have a leather or leather like detail made of the same material and colour as the vest.  Accurate pockets, knee padding, and fly should be sewn on. Trousers should have cuffed ankles. 9. Leg Strapping and Belt: Light grey leg strapping similar to that of an X-wing pilot on the outside of the legs and pants belt.  Strapping should include the detail pieces similar to a strap adjuster, which should join the strapping that goes around the leg to the strapping pieces that join to the belt.  Pants belt should be made of the same colour material as the leg strapping 10. Boots: Brown leather or leather like boots with...

Read More